Answer:
The right answer is C.
Oxidation is the loss of electrons. A loss of electrons will appear as an increase in the positive charge of the element as it is converted to an ion. Here we have aluminum have an oxidation state equals zero as a reactant because it is in the element state. After reacting, it combines with three atoms chlorine where each chlorine atom usually has an oxidation state equals -1, therefore, we have -3 charges which have to be neutralized with the 3+ charges of aluminum.
The statement which correctly describe a half-reaction is option C, i.e., Al is oxidized from 0 to +3. At elemental stage as Al, it possess no charge but, when combined with an electronegative atom aluminum gets positively charged.
What is a redox reaction ?A redox reaction is the combination of oxidation and reduction reaction. Oxidation is the losing electrons and gets into higher oxidation state whereas, reduction is just the opposite where, one species reduces to its lower oxidation state.
All species in their elemental state carries no charge and thus assume an oxidation state of 0. Thus Al and H₂ have no charge. Hydrogen is in +1 oxidation state in HCl and Al is in +3 oxidation state in AlCl₃ since, Cl has a negative charge hence, 3 Cl possess 3 unit of negative charge.
In the overall reaction, Al is thus oxidised from 0 to +3 oxidation state, whereas, H is reduced from +1 to 0. Hence, option A is correct.
To learn more about redox reactions, please refer the below link:
https://brainly.com/question/2671074
#SPJ2
The keq of a reaction is 4 x 10-7. at equilibrium, the
Matter appears to be conserved in chemical reactions but not in nuclear reactions because:
A. the law of conservation of matter only applies to a limited number of chemical and nuclear reactions
B. the law of conservation of mass-energy applies only to nuclear reactions
C. in nuclear reactions, particles move too quickly to have their masses measured
D. in nuclear reactions the changes in mass are large enough to be detected
I think it's A? Just tell me if I'm right, and if I'm wrong, point me in the right direction :)
Which pair of elements is most apt to form an ionic compound with each other?
Nuclear fusion of hydrogen into helium occurs in the
Nuclear fusion of hydrogen into helium occurs in the core of stars, specifically in their stellar cores.
This process is known as stellar nucleosynthesis and is the primary source of energy production in stars. The intense heat and pressure in the core of a star allow hydrogen nuclei (protons) to overcome their mutual electrostatic repulsion and undergo fusion reactions. It results in the formation of helium nuclei.
The most common fusion reaction in stars is the proton-proton chain, which involves a series of steps leading to the conversion of four hydrogen nuclei into one helium nucleus.
Learn more about nuclear fusion, here:
https://brainly.com/question/14019172
#SPJ6
Describe one chemical property of Group 1 metals that results from the atoms of each metal having only one valence electron.
A chemical property of Group 1 metals that results from the atoms of each metal having only one valence electron is electronegativity.
Group 1 elements are also known as alkali metals. They include sodium, lithium, potassium, cesium, francium, and rubidium. They can be found in seawater.
A chemical property of Group 1 metals that results from the atoms of each metal having only one valence electron is electronegativity. This means the tendency for the atoms to be able to attract electrons.
Read related link on:
https://brainly.com/question/2827543
Brainliest if answered in the next 5 minutes.
Identify the balanced combination equation.
Cl2O5 + H2O ⟶ 2HClO3
2Fe(OH)3 ⟶ Fe2O3 + 3H2O
Cl2O5 + 3H2O ⟶ HClO3
2Fe(OH)3 ⟶ 2FeO3 + 3H2O
Answer: The correct answer is [tex]Cl_2O_5+H_2O\rightarrow 2HClO_3[/tex]
Explanation:
Combination reaction is defined as the type of reaction in which teo smaller compounds join or combine together to form a large compound.
General representation is given by:
[tex]A+B\rightarrow AB[/tex]
A balanced chemical equation always follow law of conservation of mass. The law states that the total number of individual atoms on the reactant side is always equal to the total number of atoms on the product side.
From the given options:
The equation that is an example of balanced combination reaction is
[tex]Cl_2O_5+H_2O\rightarrow 2HClO_3[/tex]
Which of the following changes requires an oxidizing agent?
O2 yields 2O2-
SO3 yields SO42-
2F- yields F2
MnO2 yields Mn2+
Answer : The correct option is, [tex]2F^-\rightarrow F_2+2e^-[/tex]
Explanation :
Oxidation reaction : It is defined as the reaction in which a substance looses its electrons. In the oxidation reaction, the oxidation state of an element increases. Or we can say that in oxidation, the loss of electrons takes place.
Oxidizing agent : It is defined as the substance which has ability to oxidize the other substances by gaining electrons.
Reduction reaction : It is defined as the reaction in which a substance gains electrons. In the reduction reaction, the oxidation state of an element decreases. Or we can say that in reduction, the gain of electrons takes place.
Reducing agent : It is defined as the substance which has ability to reduce the other substances by losing electrons.
From the given options, we conclude that
(1) [tex]O_2+4e^-\rightarrow 2O^{2-}[/tex]
(2) [tex]SO_3+H_2O\rightarrow SO_4^{2-}+2H^+[/tex]
(3) [tex]MnO_2+4H^++2e^-\rightarrow Mn^{2+}+2H_2O[/tex]
The reaction 1, 2 and 3 shows the reduction reaction. So, it requires a reducing agent.
(4) [tex]2F^-\rightarrow F_2+2e^-[/tex]
The reaction 4 shows the oxidation reaction. Therefore, it requires an oxidizing agent.
Therefore, the correct option is, [tex]2F^-\rightarrow F_2+2e^-[/tex]
A certain weak acid, ha, has a ka value of 8.4×10−7. calculate the percent ionization of ha in a 0.10 m solution
To
determine the percent ionization of the acid given, we make use of the acid
equilibrium constant (Ka) given. It is the ratio of the equilibrium
concentrations of the dissociated ions and the acid. The dissociation reaction
of the HF acid would be as follows:
HA = H+ + A-
The acid equilibrum constant would be expressed as follows:
Ka = [H+][A-] / [HA] = 8.4 x 10^-7
To determine the equilibrium concentrations we use the ICE table,
HF
H+ A-
I 0.10 0
0
C -x +x
+x
---------------------------------------------
E 0.10-x x
x
8.4 x 10^-7= [H+][A-] / [HA]
8.4 x 10^-7 = [x][x] / [0.10-x]
Solving for x,
x = 0.0002894 = [H+] = [A-]
percent ionization = 0.0002894 / 0.10 x 100 = 0.289%
Consider the reaction cl2(g) + br2(g) <=> 2 brcl(g), which is endothermic as written. what would be the effect on the equilibrium position of removing cl2(g)?
An organic compound in which a carbonyl group is bonded to two different carbon atoms is a(n) amide. aldehyde. ketone. ester.
Answer: ketone
Explanation:
Functional groups are specific group of atoms within molecules that are responsible for the characteristic chemical reactions of those molecules.
1. Amides have functional group [tex]-O=C-NH_2[/tex].
Example: Ethanamide with molecular formula [tex]CH_3CONH_2[/tex]
2. Aldehydes have functional group [tex]-O=CH[/tex].
Example: Ethanal with molecular formula [tex]CH_3CHO[/tex]
3. Ketones have functional group [tex]-C=O[/tex].
Example: Propanone with molecular formula [tex]CH_3COCH_3[/tex]
4. Esters have functional group [tex]-O=C-OR[/tex].
Example: methyl ethanoate with molecular formula [tex]CH_3COOCH_3[/tex]
What elements make up molecules of sugar?
What is the net ionic equation of the reaction of mgso4 with sr(no3)2?
The net ionic equation for the reaction is as follows:[tex]\boxed{{\text{SO}}_4^{2 - }\left( {aq} \right) + {\text{S}}{{\text{r}}^{2 + }}\left( {aq} \right) \to {\text{SrS}}{{\text{O}}_4}\left( s \right)}[/tex]
Further Explanation:
Double displacement reaction is defined as the reaction in which ions of two compound interchange with each other to form the product. For example, the general double displacement reaction between two compound AX and BY is as follows:
[tex]{\text{AX}} + {\text{BY}} \to {\text{AY}} + {\text{BX}}[/tex]
The three types of equations that are used to represent the chemical reaction are as follows:
1. Molecular equation
2. Total ionic equation
3. Net ionic equation
The molecular equation represents the reactants and products of the ionic reaction in undissociated form. In total ionic equation, all the dissociated ions that are present in the reaction mixture are represented and in net ionic reaction, the useful ions that participate in the reaction are represented.
The steps to write the net ionic reaction are as follows:
Step 1: Write the molecular equation for the reaction with the phases in the bracket.
In the reaction, [tex]{\text{MgS}}{{\text{O}}_4}[/tex] reacts with [tex]{\text{Sr}}{\left( {{\text{N}}{{\text{O}}_{\text{3}}}} \right)_2}[/tex] to form [tex]{\text{SrS}}{{\text{O}}_4}[/tex] and [tex]{\text{Mg}}{\left( {{\text{N}}{{\text{O}}_{\text{3}}}} \right)_2}[/tex]. The balanced molecular equation of the reaction is as follows:
[tex]{\text{MgS}}{{\text{O}}_4}\left( {aq} \right) + {\text{Sr}}{\left( {{\text{N}}{{\text{O}}_{\text{3}}}} \right)_2}\left( {aq} \right) \to {\text{SrS}}{{\text{O}}_4}\left( s \right) + {\text{Mg}}{\left( {{\text{N}}{{\text{O}}_{\text{3}}}} \right)_2}\left( {aq} \right)[/tex]
Step 2: Dissociate all the compounds with the aqueous phase to write the total ionic equation. The compounds with solid phase remain same. The total ionic equation is as follows:
[tex]{\text{M}}{{\text{g}}^{2 + }}\left( {aq} \right) + {\text{SO}}_4^{2 - }\left( {aq} \right) + {\text{S}}{{\text{r}}^{2 + }}\left( {aq} \right) + 2{\text{NO}}_3^ - \left( {aq} \right) \to {\text{SrS}}{{\text{O}}_4}\left( s \right) + {\text{M}}{{\text{g}}^{2 + }}\left( {aq} \right) + 2{\text{NO}}_3^ - \left( {aq} \right)[/tex]
Step 3: The common ions on both the sides of the reaction get cancelled out to get the net ionic equation.
[tex]\boxed{{\text{M}}{{\text{g}}^{2 + }}\left( {aq} \right)} + {\text{SO}}_4^{2 - }\left( {aq} \right) + {\text{S}}{{\text{r}}^{2 + }}\left( {aq} \right) + \boxed{2{\text{NO}}_3^ - \left( {aq} \right)} \to {\text{SrS}}{{\text{O}}_4}\left( s \right) + \boxed{{\text{M}}{{\text{g}}^{2 + }}\left( {aq} \right)} + \boxed{2{\text{NO}}_3^ - \left( {aq} \right)}[/tex]
Therefore, the net ionic equation obtained is as follows:
[tex]{\text{SO}}_4^{2 - }\left( {aq} \right) + {\text{S}}{{\text{r}}^{2 + }}\left( {aq} \right) \to {\text{SrS}}{{\text{O}}_4}\left( s \right)[/tex]
Learn more:
1. Balanced chemical equation: https://brainly.com/question/1405182
2. Oxidation and reduction reaction: https://brainly.com/question/2973661
Answer details:
Grade: High School
Subject: Chemistry
Chapter: Chemical reaction and equation
Keywords: Double displacement reaction, types of equation, molecular equation, total ionic equation, net ionic equation, MgSO4, Sr(NO3)2, SrSO4, Mg(NO3)2.
The net ionic equation for the reaction of MgSO4 and Sr(NO3)2 is SO4^2- (aq) + Sr^2+ (aq) → SrSO4(s). The other ions, magnesium and nitrate, are considered 'spectator ions' and hence not included in the net ionic equation as they do not take part in the reaction.
Explanation:The reaction of MgSO4 (magnesium sulfate) and Sr(NO3)2 (strontium nitrate) is a double displacement reaction. The balanced chemical equation for this reaction is: MgSO4 + Sr(NO3)2 → Mg(NO3)2 + SrSO4.
However, the question asks for the net ionic equation. This involves expressing the reaction in terms of the ions that are present. We first need to know that MgSO4 and Sr(NO3)2 are strong electrolytes and will dissociate into ions in a solution.
When we complete these steps, the net ionic equation for this reaction is: SO4^2- (aq) + Sr^2+ (aq) → SrSO4(s). The other ions are considered 'spectator ions' and are not included in the net ionic equation because they do not participate in the reaction. So the magnesium and nitrate ions are not included in the net ionic equation.
Learn more about Net Ionic Equation here:https://brainly.com/question/36522237
#SPJ2
An elixir of ferrous sulfate contains 220 mg of ferrous sulfate in each 5 ml. if each milligram of ferrous sulfate contains the equivalent of 0.2 mg of elemental iron, how many milligrams of elemental iron would be represented in each 5 ml of the elixir?
Each 5 ml of the ferrous sulfate elixir contains 44 milligrams of elemental iron.
Explanation:The question is asking for the amount of elemental iron in 5 ml of ferrous sulfate elixir. Given that each milligram of ferrous sulfate contains 0.2 mg of elemental iron and there's 220 mg of ferrous sulfate present in every 5 ml, a simple multiplication would give the quantity of elemental iron in each 5 ml of the elixir.
Formula: Ferrous Sulfate (mg) x Elemental Iron/Ferrous Sulfate = Elemental Iron (mg)
Using the given values, it goes as follows: 220 mg x 0.2 = 44 mg. Consequently, each 5 ml of the elixir contains 44 milligrams of elemental iron.
Learn more about elemental iron content here:https://brainly.com/question/33060172
#SPJ12
Calculate the pressure in atmospheres exerted by 10.0moles of hydrogen gas at 293 kelvins if it is stored in a 7.50 liter container. Your value should be a decimal number written to three significant figures. Given: R= 0.08205 liter x atmosphere/mole x kelvin
Answer:
The correct answer is 32.1 atm. If you rearrange the ideal gas law equation to find pressure (P) and substitute the known values for the rest of the variables (n, T, and V), we get pressure equal to 32.1 atm.
Explanation:
I don't cap. Anyways good luck! I believe in you!
What is the molarity of a sodium hydroxide solution if 35.4 ml of this solution is neutralized by 24.2 ml of 1.19 m sulfuric acid solution?
The molarity of the sodium hydroxide solution is approximately 0.818 M.
Explanation:To determine the molarity of the sodium hydroxide solution, we can use the equation for the reaction between sodium hydroxide and sulfuric acid: 2NaOH + H₂SO4 → Na₂SO4 + 2H₂O. From the balanced equation, we can see that the ratio of NaOH to H₂SO4 is 2:1. Thus, if 24.2 mL of 1.19 M sulfuric acid solution neutralizes 35.4 mL of the sodium hydroxide solution, we can set up the following equation:
Molarity of NaOH × Volume of NaOH = Molarity of H₂SO4 × Volume of H₂SO4
Molarity of NaOH × 35.4 mL = 1.19 M × 24.2 mL
Rearranging the equation, we get:
Molarity of NaOH = (1.19 M × 24.2 mL) / 35.4 mL
Calculating the molarity of NaOH, we find that it is approximately 0.818 M.
What is the molar mass of (NH4)2O? Explain how you calculated this value.
The molar mass of (NH₄)₂O (ammonium oxide) is 52.10 g/mol.
To calculate the molar mass of (NH₄)₂O (ammonium oxide), we need to determine the total sum of the atomic masses of all the atoms in the chemical formula.
The atomic masses are as follows:
N (Nitrogen) = 14.01 g/mol
H (Hydrogen) = 1.01 g/mol
O (Oxygen) = 16.00 g/mol
Now, let's calculate the molar mass of (NH₄)₂O:
Molar mass of (NH₄)₂O = (2 x N) + (8 x H) + (1 x O)
Molar mass of (NH₄)₂O = (2 x 14.01 g/mol) + (8 x 1.01 g/mol) + (1 x 16.00 g/mol)
Molar mass of (NH₄)₂O = 28.02 g/mol + 8.08 g/mol + 16.00 g/mol
Molar mass of (NH₄)₂O = 52.10 g/mol
So, the molar mass of (NH₄)₂O (ammonium oxide) is approximately 52.10 g/mol.
To know more about molar mass here
https://brainly.com/question/31545539
#SPJ6
what is the percent composition in chloric acid (HClO3)?
Predict how the addition of a catalyst would affect the rate of the reaction below, and explain your prediction. h2 (g) + i2 (g) 2hi
Explanation:
A catalyst helps in increasing the rate of a chemical reaction without itself getting consumed in the reaction.
Basically, a catalyst decreases the activation energy so that reactant molecules can easily participate in the reaction.
For example, when a catalyst is added to [tex]H_{2}(g) + I_{2}(g) \rightarrow 2HI[/tex] then there will be a decrease in activation energy and both reactants (hydrogen and iodine) can easily participate in the chemical reaction.
As a result, formation of product (HI) becomes faster.
Thus, we can conclude that a catalyst helps in increasing the rate of a reaction.
What is the H+ if the pH of a solution is 1.65?
Answer:
[H⁺] = 2.2 × 10⁻²
Explanation:
pH = -log [H⁺]
10∧-pH = [H⁺]
[H⁺] = 10⁻¹°⁶⁵
[H⁺] = 0.0224
[H⁺] = 2.2 × 10⁻²
So the concentration of hydrogen in solution of 1.65 pH is 2.2 × 10⁻².
What does mass measure?
What is the average kinetic energy of a gas at 285 kelvin? (R = 8.314 J/K-mol)
Answer:
The average KE = 312 J/mol
Explanation:
Given:
Temperature of the gas, T = 285 K
Gas constant, R = 8.314 J/K-mol
To determine:
The average kinetic energy of the gas
Explanation:
Based on the kinetic theory of gases, the average kinetic energy is given as:
[tex]KE = \frac{3}{2} RT\\[/tex]
In this case:
[tex]KE = \frac{3}{2} *8.314\ J/K-mol * 285\ K = 312 J/mol[/tex]
What is the only subatomic particle that is directly involved in the chemical reactions?
What is the molarity of the solution made by dissolving a 5.67 g of potassium chloride in enough water to make 100 mL of the solution
The solubility of silver chloride can be increased by dissolving it in a solution containing ammonia. agcl (s) ag+ (aq) + cl- (aq) k1 = 1.6 x 10-10 ag+ (aq) + 2nh3 (aq) ag(nh3)2+ (aq) k2 = 1.5 x 107 what is the value of the equilibrium constant for the overall reaction? agcl (s) + 2nh3 (aq) ag(nh3)2+ (aq) + cl- (aq) knet = ?
Final answer:
To calculate the net equilibrium constant for the dissolution of silver chloride in ammonia, the individual constants for the dissolution of AgCl and the formation of [tex][Ag(NH_3)_2]^+[/tex] are multiplied, yielding Knet = 2.4 x 10^-3.
Explanation:
The solubility of silver chloride (AgCl) in ammonia solution can be analyzed using the concept of equilibrium constants. The equilibrium constant (K) for the dissolution of AgCl in water is given as 1.6 x 10-10, and the formation constant (K2) of the complex ion [tex][Ag(NH_3)_2]^+[/tex] is 1.5 x 107. To find the net equilibrium constant (Knet) for the overall reaction where AgCl dissolves in the presence of NH3 to form the complex ion and release Cl-, we can multiply the individual constants: K1 * K2. Thus, Knet = (1.6 x 10-10)(1.5 x 107) = 2.4 x 10-3.
What volume of 0.0250 m calcium hydroxide is required to neutralize 33.50 ml of 0.0200 m nitric acid?
which statement best describes why specific heat capacity is often more useful than heat capacity for scientists while comparing two materials
Answer:
A.
key words: intensive, does not depend on sample size
Explanation:
If you mechanically shook a mixture of phospholipids and water, what would you expect to see when you observe the solution using an electron microscope?
Answer: two layer liquid (bilayer)
Explanation:
First of all let me explain a few terms
Hydrophobic side: means water disliking part... From the phobia.
Hydrophilic side means water loving side.
So the phospholipid have this two parts. When you shake it in water, the hydrophilic part will interact and mix with water while the hydrophobic part will just float and separated into two layers.. Just like pouring groundnut oil into water.
What is the repeating unit in the polymer –ch2–ccl2–ch2–ccl2–ch2–ccl2– ?
What observations would lead you to believe that the ink is actually a mixture?
The Valence Electrons of an Atom of Which Element would feel a Greater Effective Nuclear Charge than the Valence?
The Valence Electrons of an Atom of which element would feel a greater effective Nuclear Charge than the valence electrons of a Boron (B) atom?
Aluminum (Al)
Beryllium (Be)
Hydrogen (H)
Carbon (C)
Carbon's valence electrons feel a greater effective nuclear charge than those of a Boron atom because Carbon has one more proton without significantly increasing the shielding effect, leading to a stronger pull on the valence electrons.
Explanation:The question asks which element's valence electrons feel a greater effective nuclear charge than those of a Boron (B) atom. To answer this, one must understand how shielding and effective nuclear charge work. As we go from left to right across a period in the periodic table, while the number of core electrons remains the same, the nuclear charge increases. This means the valence electrons feel a stronger pull from the nucleus since they are not effectively shielded by the same number of core electrons. Comparing Boron with Aluminum (Al), Beryllium (Be), Hydrogen (H), and Carbon (C), we find that Carbon, having one more proton than Boron, does not increase the shielding effect significantly, which leads to its valence electrons feeling a greater effective nuclear charge than Boron's. Therefore, Carbon (C) is the correct response.