NaOH + X → NaCH3COO + H2O
In the incomplete reaction above x is CH3COOH ( acetic acid)
Explanation
carboxylic acid react with metal hydroxide to form salt and water. sodium hydroxide (NaOH) react with acetic acid to form sodium acetate ( NaCH3COO and water H2O.NaOH + CH3COOH → NaCH3COO (salt) + H2O
What is formed when two or more different elements chemically combine?
A. Atom
B. Compound
C. Mixture
D. Nuclear Fission
What volume of 1.25M HCl would be required to prepare 180 mL of a 0.500M HCl solution? A. 2.2 x 103 mL B. 450 mL C. 72 mL D. 0.014 mL
To solve this we use the dilution equation used in chemistry,
M1 V1 = M2 V2
where M1 is the concentration of the stock solution, V1 is the volume of the stock solution, M2 is the concentration of the new solution and V2 is its volume.
M1 V1 = M2 V2
1.25 M x V1 = 0.500 M x 180 mL
V1 =72 mL of the concentrated solution
Therefore, the correct answer would be option C.
A 3.45 microgram sample of Uranium has a mass of how many grams?
Aluminum oxide (used as an adsorbent or a catalyst for organic reactions) forms when aluminum reacts with oxygen.
An ion from a given element has 38 protons and 36 electrons what is the charge
A positively charged ion, or cation, results when an atom loses electrons, resulting in more protons than electrons. In this case, the ion with 38 protons and 36 electrons carries a 2+ charge due to the excess of two protons.
Explanation:In an atom, the number of protons determines the atomic number and identifies the element. Normally, an atom is neutral, having the same number of protons and electrons. However, when an atom gains or loses electrons, it becomes an ion and carries a charge. In the case of your ion, it has 38 protons and 36 electrons. The positive protons outnumber the negative electrons by two, so your ion carries a 2+ charge.
Learn more about Ion Charge here:https://brainly.com/question/11938054
#SPJ12
How much heat is required to convert 5.88 g of ice at − 12.0 ∘c to water at 27.0 ∘c ? (the heat capacity of ice is 2.09 j/g∘c, δhvap(h2o)=40.7kj/mol, δhfus(h2o)=6.02kj/mol)?
The total heat needed to heat ice from -12°C to 0°C, melt the ice at 0°C, and heat the liquid water from 0°C to 27°C is 2778 J.
To calculate the total heat needed for the three processes, we need to calculate the heat needed for each process separately and then add them together.
Heating the ice from -12°C to 0°C
The heat needed for this process can be calculated using the following equation:
Q = m * C * ΔT
where:
Q is the heat in Joules (J)
m is the mass of the ice in grams (g)
C is the specific heat capacity of ice in Joules per gram degree Celsius (J/g°C)
ΔT is the change in temperature in degrees Celsius (°C)
The mass of the ice is 5.88 g, the specific heat capacity of ice is 2.09 J/g°C, and the change in temperature is 12°C (from -12°C to 0°C). Substituting these values into the equation above, we get:
Q = 5.88 g * 2.09 J/g°C * 12°C = 147.47 J
Melting the ice at 0°C
The heat needed to melt the ice can be calculated using the following equation:
Q = m * Δh_fus
where:
Q is the heat in Joules (J)
m is the mass of the ice in grams (g)
Δh_fus is the latent heat of fusion of ice in Joules per gram (J/g)
The latent heat of fusion of ice is 6.02 kJ/mol. We need to convert the mass of the ice to moles first.
0.327 moles = 5.88 g / 18.0 g/mol
Substituting the mass of the ice in moles and the latent heat of fusion into the equation above, we get:
Q = 0.327 moles * 6.02 kJ/mol = 1.96653 kJ = 1966.53 J
Heating the liquid water from 0°C to 27°C
The heat needed for this process can be calculated using the following equation:
Q = m * C * ΔT
where:
Q is the heat in Joules (J)
m is the mass of the liquid water in grams (g)
C is the specific heat capacity of liquid water in Joules per gram degree Celsius (J/g°C)
ΔT is the change in temperature in degrees Celsius (°C)
The mass of the liquid water is 5.88 g, the specific heat capacity of liquid water is 4.184 J/g°C, and the change in temperature is 27°C (from 0°C to 27°C). Substituting these values into the equation above, we get:
Q = 5.88 g * 4.184 J/g°C * 27°C = 663.82 J
Total heat
The total heat needed for all three processes is:
Q_total = Q_1 + Q_2 + Q_3 = 147.47 J + 1966.53 J + 663.82 J = 2777.82 J
For more such information on: heat
https://brainly.com/question/934320
#SPJ6
Diatomic n2 can react with diatomic h2 to form ammonia (nh3). the balanced chemical equation is: n2 + 3 h2 ? 2 nh3 if 6 moles of h2 totally reacted with more than enough n2, how many moles of ammonia would be expected to form?
Name three characteristics of nonmetals.
If an isotope of an element has 18 neutrons and a mass number of 35, how many electrons must it have?
An atomic physicist determines that an atom is composed of 8 positively charged particles and has a mass of 15 amu. Which is the best conclusion that can be drawn? A. 7 neutrons and 8 protons. B. 7 electrons and 8 protons. C. 8 neutrons and 7 electrons. D. 8 electrons and 7 protons.
Answer: The correct answer is Option A.
Explanation:
There are 3 subatomic particles present in an atom. They are: protons, electrons and neutrons.
Protons carry positive charge, electrons carry negative charge and neutrons does not carry any charge.
Any neutral atom has equal number of protons and electrons.
Mass number is defined as the sum of number of neutrons and number of protons present in an atom. It is represented as A.
Mass number = Number of neutrons + Number of protons
We are given:
Number of positively charged particles = Number of protons = 8
Mass number = 15
Number of neutrons = 15 - 8 = 7
Hence, the correct answer is Option A.
Select all of the items that are true about a sample of water vapor at 101°C as it cools.
A) Its temperature will fall continuously until it condensed into a liquid.
B) Its temperature will fall steadily until reaching 100°C.
C) The molecules of water gain potential energy.
D) Its temperature will remain at 100°C until all the vapor condenses.
Answer: Option (D) is the correct answer.
Explanation:
Heat absorbed by a substance to change the state of matter is known as latent heat. This heat is utilized to break the bonds between atoms of the substance so that they can undergo phase change.
So, when water boils at 100 degree Celsius then temperature will remain constant unless and until all the water changes into vapor. As it is the latent heat that breaks the bonds between hydrogen and oxygen atoms of water so that liquid state can change into gaseous state.
Since latent heat is a hidden heat, that is why, it does not get reflected and there is no change in temperature due to it.
Thus, we can conclude that it is true that temperature will remain at 100°C until all the vapor condenses for a sample of water vapor at 101°C as it cools.
The bond formed between iron (electronegativity = 1.9) and chlorine (electronegativity = 3.2) is
Answer:
Polar covalent.
Explanation:
Hello,
In this case, ionic and covalent bonds could be differentiated by subtracting the constituents' electronegativities. Thus, for iron and chlorine, we have:
[tex]\Delta E=E_{Cl}-E_{Fe}=3.2-1.9=1.3[/tex]
Hence, when such difference is less than 1.7, the bond is polar covalent as it is also greater than 0.7.
Best regards.
How test berween nitric and sulferic acid?
For many enzymes, the rate of product formation increases as the concentration of the substrate increases. eventually the rate of the reaction reaches a maximum at which further increases in the concentration of the substrate have no effect.
When a ketone and its enol are in equilibrium, under most conditions the concentration of the enol is ________ the concentration of the ketone?
Answer:
Much lower than ketone is more stable than enol. N, 4-Dimethylpent -4-en-2-Amine (NH_3 protonated in acidic protoned in acidic conditions) d. [Proton cannot re extracted from OH in acidic conditions to firm O^(-)].
It is logical to conclude that water cannot dissolve vegetable oil because the oil is
Answer:
The oil is insoluble with water.
Explanation:
The water and oil do not mix, they are illustrated as immiscible. The molecules of water are polar, that is, they exhibit a small positive charge at one terminal and a small negative charge at the other terminal, and they attach with each other. The molecules of oil are non-polar, and they possess no charge. Due to this, the molecules of oil are more fascinated with each other than to the molecules of water, and the molecules of water are more fascinated towards each other than to the molecules of oil.
Which atoms have the same number of neutrons?
1) H-1 and He-3
2) H-2 and He-3
3) H-3 and He-3
4) H-3 and He-4
Final answer:
Atoms H-2 (deuterium) and He-3 both have 1 neutron each, which means they have the same number of neutrons.
Explanation:
The student has asked which atoms have the same number of neutrons. To find this out, we must compare the nucleon number (sum of protons and neutrons) for each atom and subtract the atomic number (number of protons) to get the number of neutrons.
For H-1 (protium), it has 1 proton and no neutrons.
For H-2 (deuterium), it has 1 proton and 1 neutron.
For H-3 (tritium), it has 1 proton and 2 neutrons.
For He-3, it has 2 protons and 1 neutron.
For He-4, it has 2 protons and 2 neutrons.
From this, we can see that H-2 (deuterium) and He-3 both have 1 neutron.
Therefore, the correct answer is (2) H-2 and He-3 have the same number of neutrons.
______ bonds are made between successive amino acids during elongation.
A substance decays so that the amount a of the substance left after t years is given by: a = a 0 · (0.9) t , where a 0 is the original amount of the substance. what is the half-life (the amount of time that it takes to decay to half the original amount) of this substance rounded to the nearest tenth of a year?
I think the correct form of the equation is given as:
a = a0 * (0.9)^t
where t is an exponent of 0.9 since this is an exponential decay of 1st order reaction
Now to solve for the half life, this is the time t in which the amount left is half of the original amount, therefore that is when:
a = 0.5 a0
Substituting this into the equation:
0.5 a0 = a0 * (0.9)^t
0.5 = (0.9)^t
Taking the log of both sides:
t log 0.9 = log 0.5
t = log 0.5 / log 0.9
t = 6.58 years
Answer:
half life = 6.58 years
Answer:
6.58 years
Explanation:
What characteristic shared between chlorine, fluorine, and bromine makes them have similar properties?
A. All have seven valence electrons.
B. All have the same number of protons in their outermost energy levels.
C. All have two electrons in their first energy levels.
D. All have a similar state of matter.
The Correct Answer is A. If you look at the periodic table of elements, you may notice that Chlorine (Cl, #17), Fluorine (F, #9), and Bromine (Br, #35) are all in the same family (or column). That is group VIIA or 17. VII is 7 in roman numerals and that is the number of valence electrons.
Hope that helps!
How much is 35° C in F?
At which point could the substance shown exist as a gas or a solid but not a liquid?
Answer:
The substance is not shown, so I'll answer the question in general terms.
Any substance can exist as a gas or a solid but not a liquid below the triple point pressure. As can be seen in the figure attached, below the triple point pressure there are only two possible phases, solid and gas. This means that a solid at a pressure below the triple point pressure which is heated at constant pressure (only its temperature increase) will sublimate, that is, it transforms into gas without passing through liquid phase. Analogously, a gas at a pressure below the triple point pressure which is cooled at constant pressure (only its temperature decrease) will deposit, that is, it transforms into solid without passing through liquid phase .
What color is a marker that indicates safe water on all sides?
A white spherical buoy with vertical blue bands is used as a marker that indicates safe water on all sides in maritime settings.
Explanation:A marker that indicates safe water on all sides is typically labeled as a spherical, white buoy with vertical blue bands. These navigational aids are universal in maritime settings and they are also called a Safe Water Mark, or sometimes a fairway, mid-channel, or sea buoy. They indicate that there is safe, navigable water all around the buoy and are not indicative of danger otherwise.
Learn more about Safe Water Mark here:https://brainly.com/question/32032592
#SPJ6
A marker that indicates safe water on all sides typically has a green color. In nautical navigation, "green" markers, often in the form of buoys or beacons, are used to indicate the safe, navigable side of a channel or waterway.
Green is frequently the color of a signpost that denotes safe water on both sides. "Green" markings, frequently in the shape of buoys or beacons, are used in maritime navigation to denote the side of a canal or waterway that is safe and navigable. A green marker indicates a safe passageway that is to the side of the marker where it is located. These markings are used by seafarers and boaters to make sure they remain in the deep and secure area of the river. On the opposing side, red markings are utilized to denote the area that is safe to cross through. This system is a component of the lateral navigation aids that provide secure and efficient navigation on waterways.
Color Codes for Navigational Aids: Different color codes and markers are used in maritime navigation to give mariners crucial information and aid in their safe navigation of waterways. These "buoys," as these markers are frequently called, are used to designate the locations of hazards, safe channels, and other navigational data.
Safe Water Markers: One category of these navigational aids is safe water markers. They serve to alert mariners to the presence of safe, navigable water. In order to direct vessels away from hazards like shallow places, rocks, or reefs, safe water signs are often set in open, deep waters.
Green: Green is the traditional and universally accepted hue used for safe water markers. A green marker tells seafarers they can safely navigate around the buoy on all sides. The color green is related to the idea of "go" or safe passage. The green buoy, which designates the middle of a navigable channel, is open to vessel traffic on either side.
Topmarks and Shapes: In addition to their distinctive colors, safe water buoys may also include topmarks that stand out to mariners—shapes or symbols that are attached to the buoy's top. These extra characteristics are used to aid seafarers in distinguishing between various marker kinds and to offer more navigational information.
Regulation Compliance: The International Association of Lighthouse Authorities (IALA) and the U.S. Coast Guard in the United States have established standards for the usage of green markers to denote safe water. To promote reliable and safe navigation on the water, these organizations offer standards and guidelines for the use of navigational markers and aids.
In conclusion, seafarers can cruise around a green nautical marker without worrying about running aground or coming across hazards because it shows that they are in an area of safe water. It is a crucial component of the system that aids in ensuring the safe passage of ships across waterways all over the world.
To know more about seafarers:
https://brainly.com/question/39702534
#SPJ12
If you started with 50.0 grams of h2s and 60.0 grams of o2, how many grams of s8 would be produced, assuming 98 % yield?
The number of grams, of S₈, would be produced, assuming 98 % yield is 47.1 grams.
What is mass?Mass is the quantity of matter in a physical body.
The chemical reaction is
8H₂S +4O₂ ---> S₈ + 8H₂O
Molar ratios
8 mol H₂S : 4 mol O2 : 1 mol S8
Convert 50.0 grams of H2S into moles
moles = mass in grams / molar mass
Molar mass H₂S = 2 x 1g/mol + 32.1 g/mol = 34.1 g/mol
Moles = 50.0 g / 34.1 g/mol = 1.466 moles H2S
Convert 60.0 g of O₂ into moles
Molar mass O2 = 2 x 16g/mol = 32.0g/mol
moles = 60.0g / 32.0 g = 1.875 moles O2
State-limiting reagent
Theoretical ratio: 8 mol H₂S / 4 mol O2 = 8/4 = 2/1 = 2
Actual ratio 1.466 mol H₂S / 1.875 mol O2 < 2
=> H₂S is the limiting reagent (it is consumed completely whilce some O2 remains unreacted).
Determine the moles of S₈ produced from 1.466 moles H₂S
1 mol S₈ / 8 mol H₂S x 1.466 mol H₂S = 0.18325 mol S₈
Convert 0.18325 mol S to mass
mass = number of moles x molar mass
molar mass S₈ = 8 mol x 32.1g/mol = 256.8 g/mol
mass = 0.18325 mol x 256.8 g/mol = 47.1 grams
Thus, the mass of the S₈ is 47.1 g.
To learn more about mass, refer to the link:
https://brainly.com/question/1787001
#SPJ5
Which statement is correct regarding the rate of the reaction below? 3A + B 4X + 2Y The rate of disappearance of B is three times greater than that of A. The rate of formation of Y is twice the rate of formation of X. The rate of formation of X is four times the rate of disappearance of B. The rate of disappearance of A is three times the rate of formation of Y.
Identify the reaction equation, N2 + H2 NH3
A.decomposition reaction
B.double displacement reaction
C.neutralization reaction
D.single replacement reaction
E.synthesis reaction
Answer: The correct answer is Option E.
Explanation:
For the given options:
Option A: Decomposition reactionThis reaction is defined as the chemical reaction in which a single substance breaks down into two or more simpler substances.
[tex]AB\rightarrow A+B[/tex]
Option B: Double displacement reactionThis reaction is defined as the chemical reaction in which exchange of ions takes place.
[tex]AB+CD\rightarrow AD+CB[/tex]
Option C: Neutralization reactionThis reaction is defined as the chemical reaction in which an acid reacts with a base to produce a salt and water molecule.
[tex]HX+BOH\rightarrow BX+H_2O[/tex]
Option D: Single displacement reactionThis reaction is defined as the chemical reaction in which more reactive element displaces a less reactive element from its chemical reaction.
[tex]AB+C\rightarrow CB+A[/tex]
Option E: Synthesis reactionThis reaction is defined as the chemical reaction in which substances combine in their elemental state to form a single compound.
[tex]A+B\rightarrow AB[/tex]
For the given chemical reaction:
[tex]N_2+3H_2\rightarrow 2NH_3(g)[/tex]
This reaction is considered as a synthesis reaction because hydrogen and nitrogen are combining in their elemental state to produce ammonia molecule.
Hence, the correct answer is Option E.
Two electrons are found in the same atom. One has the quantum number set (3, 2, 0, +½), and the other has the quantum number set (3, 1, 0, +½). They share the
a same sub level but differentt orbitals
b same orbital but different spin directions
c same energy level but different sublevels
d same type of sub level but found in different energy sub levels
Answer:
Explanation: In an atom, there is a nucleus at the center that has protons and neutrons inside it and the electrons are present in different shells(energy levels) around the nucleus. These shells(energy levels) are divided into sub shells(sub energy levels).
To know more about the position and other information about an electron present in an atom we use a set of four numbers known as quantum numbers.
The four quantum numbers are:
principal quantum number:- It's denoted by n and it has an integer values 1, 2, 3 and so on. It's tells us about the shell in which an electron is present.
Azimuthal or orbital angular momentum quantum number :- It's denoted by l and its values are (n-1), where n is principal quantum number.
for example, if n = 1 then l = 0
n = 2 then l = 0 or 1
n = 3 then l = 0, 1 or2
and n = 4 then l = 0, 1, 2 or 3
l = 0 indicates the electron is in s subshell.
l = 1 indicates the electron is in p subshell.
l = 2 indicates the electron is in d subshell and
l = 3 indicates the electron is in f subshell.
Magnetic quantum number :- It's denoted by ml and it has values from -l to +l values.
It determines the number of orbitals and their orientation within a subshell.
for example, l = 0 then ml = 0
l = 1 then ml = -1, 0, +1
l = 2 then ml = -2, -1, 0, +1, +2
l = 3 then ml = -3, -2, -1, 0, +1, +2, +3
Spin quantum number :- It is denoted by ms and it does not depend on other quantum numbers. It tells us if the spin of an electron is clockwise or counter clockwise.
it has +1/2(clockwise) or -1/2(counter clockwise) values.
The four quantum numbers are written in the order n, l, ml and ms.
If we look at the given two sets of quantum numbers then values of n, ml and ms are same but the value of l is different.
Value of n is same means both electrons are in same energy level. Value of ms is same means the spin of both the electrons is same.
Value of l for the first set is 2 means the electron is present in d-subshell. Value of l for the second set of quantum numbers is 1 means the electron is present in p-subshell.
choice A is not correct as the electrons are in different subshells.
Choice B is also not correct as the electrons spin is in same direction.
Choice C is correct as the electrons are in same energy level but different sublevels.
Find the percent ionization of a 0.337 m hf solution. the ka for hf is 3.5 x 10-4. 1.1 % 1.2 x 10-2 % 3.2 % 3.5 x 10-2 % 4.7 %
To
determine the percent ionization of the acid given, we make use of the acid
equilibrium constant (Ka) given. It is the ration of the equilibrium
concentrations of the dissociated ions and the acid. The dissociation reaction
of the HF acid would be as follows:
HF = H+ + F-
The acid equilibrum constant would be expressed as follows:
Ka = [H+][F-] / [HF] = 3.5 x 10-4
To determine the equilibrium concentrations we use the ICE table,
HF
H+ F-
I 0.337 0
0
C -x +x
+x
---------------------------------------------
E 0.337-x x
x
3.5 x 10-4 = [H+][F-] / [HF]
3.5 x 10-4 = [x][x] / [0.337-x]
Solving for x,
x = 0.01069 = [H+] = [F-]
percent ionization = 0.01069 / 0.337 x 100 = 3.17%
The percent ionization of a 0.337 M HF solution : 3.2%
Further explanationAccording to Arrhenius, acids are substances which, when dissolved in water, release Hions.
An HₓY acid in water will ionize:
HₓY (aq) --------> xH⁺ (aq) + Yˣ- (aq)
Example:
HCl -------> H⁺ + Cl⁻
The amount of Hions produced by 1 acid molecule is called valence acid, whereas acidic residuals are formed after the release of Hions.
Usually, the name acid begins with the word acid followed by the name of the remaining acidic ion
The ion concentration of a weak acid is determined by the value of the acid ionization constant (Ka).
The greater the value of Ka, the greater the dissociated acid produces its Hion and the greater its acidity
HF is a weak acid
Weak acid ionization reaction occurs partially (not ionizing perfectly as in strong acids)
The ionization reaction of a weak acid is an equilibrium reaction
HA (aq) ---> H + (aq) + A- (aq)
The equilibrium constant for acid ionization is called the acid ionization constant, which is symbolized by Ka
The values for the weak acid reactions above:
Ka = [H +] [A-] / [HA]The greater the Ka, the stronger the acid, which means the reaction to the right is also greater
The degree of ionization (symbol α) is the ratio of the amount of ionizing substance to the amount of substance dissolved
α = amount of substance ionizing : amount of substance dissolved
HF decomposition reaction
HF ---> H⁺+ F⁻ if there is 0.337 M HF, then
[tex]\rm Ka=\dfrac{[H^+][F^-]}{[HF]}[/tex]
3.5 x 10⁻⁴. = x. x : 0.337-x (0.337-x is considered proportional to 0.337 because x is very small)
1,179.10⁻⁴ = x²
x = 0.01086
α = 0.01086: 0.337
α = 0.0322
α = 3.22%
Learn more
calculate kc
https://brainly.com/question/8336945
strong enough acids
https://brainly.com/question/5273689
acetylene deprotonate
https://brainly.com/question/5613072
How many different types of atoms are present in one molecule of aluminum hydroxide, Al(OH)3? 2 3 4 5
Answer: There are exactly 3 different types of atoms in one molecule of aluminum hdroxide.
Hope this helps!
compare and contrast thomsons plum pudding model with rutherfords nuclear atomic model
Different atomic models were proposed to explain the distributions of charged particles in an atom. Two of these models proposed by J.J. Thomason and Ernest Rutherford are discussed below.
Similarities
Both models explain the presence of positively charged and negatively charged particles. Thomson's model indicates that atoms have a spherical shape. Rutherford's model indicates that electrons are revolving around the nucleus, which is a sphere shape. Both models state that positively and negatively charged particles are held together by the electrostatic force of attraction.Differences
Thomason's Plum pudding model describes that atom possess a spherical shape in which positive charges are distributed uniformly. Rutherford's model states that positively charges particles concentrates on the center called the nucleus. Thomason's model does not give any idea about the nucleus and Rutherford's model explains about the nucleus. Thomason's model states that electrons are embedded in positively charged particles. In Rutherford's model electrons are revolving around the nucleus in a circular path called orbits.Hence, we can conclude that the key difference is that, Thomason's model does not give any idea about the nucleus and Rutherford's model explains about the nucleus.
Learn more about atomic models comparison here:
https://brainly.ph/question/10530590