Compounds which are characterized as covalent are generally made up of elements found in which part of the periodic table

Answer:

Aluminum

Explanation:

Its the same as the top on but easier to understand

and the top one was approved so.................its right

The chlorination of ethane produces a mixture of two isomeric dichlorides, cis-1,2-dichloroethene and trans-1,2-dichloroethene.

The chlorination of ethane yields a mixture of two isomeric dichlorides in addition to ethyl chloride. These two isomers are cis-1,2-dichloroethene and trans-1,2-dichloroethene. In cis-1,2-dichloroethene, the two chlorine atoms are on the same side of the molecule, while in trans-1,2-dichloroethene, the two chlorine atoms are on opposite sides of the molecule.

Answer: Rn

Explanation:

Nonmetals which are located in the second row form pi bonds more easily than the elements situated in the third row and below. Actually there are no compounds or molecules known that forms covalent bonds to the noble gas Ne and Ar. Hence the other second row element which is Carbon, is the element that forms pi bonds most readily.

Answer:

C

Carbon (C) is the element that forms π bonds most readily from the given list, due to its capability for effective p-orbital overlap and its central role in forming multiple bonds in organic and inorganic chemistry.

From the list provided, the element that forms π bonds most readily is carbon (C). Π bonds are typically formed when p-orbitals overlap sideways, which is something carbon can do efficiently thanks to its ability to hybridize its atomic orbitals (such as sp2 and sp3 hybridization) and its relatively small size, which allows effective sideways overlap. Elements like Li, K, Cl, Ne, and Ar either do not form π bonds readily due to their electronic configurations or, in the case of the noble gases Ne and Ar, rarely form bonds at all due to their stable octet configuration.

Carbon is well known for its ability to form double and triple bonds, which include both σ (sigma) and π bonds. Structures such as the C=C double bond have one σ bond, formed by the head-on overlap of orbitals, and one π bond, formed by the side-on overlap of p-orbitals. In organic and inorganic chemistry, carbon's capability of forming π bonds is fundamental and leads to the vast diversity of organic compounds.

The formula mass of calcium iodate, Ca(IO3)2, is calculated by multiplying the quantity of each atom by its atomic mass and summing up those values. Thus, the formula mass of Ca(IO3)2 is 389.88 atomic mass units (amu).

To calculate the formula mass of calcium iodate, or Ca(IO3)2, we must first know the atomic masses of the individual elements. The atomic mass of calcium (Ca) is approximately 40.08 amu, that of iodine (I) is about 126.90 amu, and that of oxygen (O) is approximately 16.00 amu. Calcium iodate consists of one calcium atom, two iodine atoms and six oxygen atoms. Thus, the formula mass can be calculated as follows:

By adding all these up, the formula mass of calcium iodate is 40.08 amu + 253.80 amu + 96.00 amu = 389.88 amu.

https://brainly.com/question/3952904

#SPJ3

The elements in the noble gas family share the property of being extremely unreactive due to their full valence shells. This makes them stable and resistant to forming compounds.

The elements in the noble gas family, also known as Group 8A, share the property of being extremely unreactive. This is because they have a full valence shell of electrons, making them stable and unlikely to form compounds. The noble gases are helium, neon, argon, krypton, xenon, and radon. These gases are characterized by their full outer subshell and large ionization energies, which make them highly stable and resistant to forming chemical bonds.

Noble gases, found in Group 18 of the periodic table, are extremely unreactive due to having a full valence shell of electrons, leading to stable noble gas configurations and high ionization energies. They are gases at room temperature and are used in situations requiring minimal reactivity.

The elements of the noble gas family all share the property of being extremely unreactive, and this is due to each having a full valence shell of electrons. For helium, this means two valence electrons, and for the others, like neon, argon, krypton, xenon, and radon, it is eight valence electrons. The full valence shell makes noble gases very stable and not inclined to participate in chemical reactions that involve the transfer or sharing of electrons. This unique characteristic can be traced to their position in Group 18 (or 8A) of the periodic table, where all elements are gases at room temperature.

Because the noble gases have their outermost electron shell completely filled, they naturally have the most stable electron configuration possible, which is known as a noble gas configuration. Other elements strive to achieve a similar configuration by gaining, losing, or sharing electrons. The full valence shell also means that the noble gases have high ionization energies, which means they do not easily lose electrons, and would only accept an extra electron at a significantly higher and less stable energy level. These properties explain why the noble gases are found in their elemental form in nature and are used in applications where minimal reactivity is desired.

When the atoms share six electrons they are joined by a double bond that is a covalent bond . Hence, the given statement is true.

Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.

Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.

Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.

Learn more about covalent compounds,here:

https://brainly.com/question/21505413

#SPJ5

Answer:

Number of moles of hydrogen gas produced is 463.

Explanation:

Mass of hydrogen gas measured by chemist = 926 g

Molar mass of hydrogen gas = 2 g/mol

[tex]Moles=\frac{\text{Given mass of compound}}{\text{Molar mass of compound}}[/tex]

Moles of hydrogen gas:

[tex]\frac{926 g}{2 g/mol}=463 mol[/tex]

Number of moles of hydrogen gas produced is 463.

1. The formula for absorbance is given as:

A = log (Io / I)

where A is absorbance, Io is initial intensity, and I is final light intensity

log (Io / I) = A

log (Io / I) = 2

Io / I = 100

Taking the reverse which is I / Io:

I / Io = 1 / 100

I / Io = 0.01

Therefore this means that only 0.01 fraction of light or 1% passes through the sample.

2. What is meant by transmittance values is actually the value of I / Io. So calculating for A:

at 10% transmittance = 0.10

A = log (Io / I)

A = log (1 / 0.10)

A = 1

at 90% transmittance = 0.90

A = log (Io / I)

A = log (1 / 0.90)

A = 0.046

So the absorbance should be from 0.046 to 1

3. at 10% transmittance = 0.10

A = log (Io / I)

A = log (1 / 0.10)

A = 1

Final answer:

The atomic number of carbon is 6, corresponding to its electron configuration 1s²2s²2p². Its valence shell electron configuration is 2s²2p², important for understanding its chemical properties and reactivity.

Explanation:

The student's question pertains to the electron configuration of carbon and its corresponding atomic number. Carbon's atomic number is indeed 6, which signifies that a neutral carbon atom contains six protons and, consequently, six electrons. The electron configuration for carbon (C) is denoted as 1s²2s²2p². This depicts that two electrons occupy the first energy level (1s orbital), two occupy the second energy level's s orbital (2s orbital), and the remaining two electrons are in the second energy level's p orbital (2p orbitals).

According to Hund's rule, the most stable arrangement of electrons in subshells with the same energy (degenerate orbitals) is the one with the maximum number of unpaired electrons, which is why in the case of carbon's 2p orbitals, the two electrons remain unpaired, each occupying a separate 2p orbital. This is also in accordance with the Pauli exclusion principle, which states that no two electrons in the same atom can have identical sets of all four quantum numbers.

The valence shell electron configuration of carbon, which is critical for chemical bonding and reactivity, is 2s²2p². This is important to note because elements in the same column of the periodic table generally have similar valence shell electron configurations, which influences their chemical properties. For example, elements with an ns²np² valence configuration show similar reactivity and bonding characteristics.

Robert Merton identified two important concepts in society: functions and dysfunctions.

Functions are the positive consequences of a particular action. These can be manifest (consequences people observe or expect) or latent (not recognized of intended). On the other hand, dysfunctions are those consequences that are negative, and which are unintended or unrecognized.

In this case, the initial action is to reduce funding for education and training. However, this has a negative consequence which is unintended: the fact that workers do not have the skills needed for the job. Therefore, the behaviour is dysfunctional.

Answer: Because some people may be hurt

Explanation: I just took the test on a pe x

I believe that the correct answer here is:

“in neither photosynthesis nor respiration”

This is because during photosynthesis, carbon dioxide is converted to glucose.

While during respiration, carbon dioxide is not split because it is one of the products of respiration hence it is rather created.

Answer: [tex]29.37\times 10^{23}molecules [/tex]

Explanation: To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\textMolar mass}}[/tex]    

Given mass of ammonia [tex]NH_3[/tex] given = 82.9 g

Molar mass of ammonia [tex]NH_3[/tex] = 17 g/mol

Putting values in above equation, we get:

[tex]\text{Moles of sodium}=\frac{82.9g}{17g/mol}=4.87mol[/tex]

According to Avogadro's law,

1 mole of any substance contains avogadro's number  [tex]6.023\times 10^{23}[/tex] of particles.

Thus 4.87 moles of ammonia contains=[tex]\frac{6.023\times 10^{23}}{1}\times 4.87=29.37\times 10^{23}molecules [/tex] of ammonia.

Answer: The correct answer is Option B.

Explanation:

Compound having oppositely charged ions are considered as ionic compounds.

Ionic compounds are formed when complete transfer of electrons takes place between the atoms forming a bond. This bond is formed between a metal and a non-metal or a polyatomic cation and an non-metal or a metal and a polyatomic anion. For Example: [tex]NaCl,NH_4Cl,BaSO_4[/tex] etc..

Covalent compounds are formed when sharing of electrons takes place between the atoms forming a bond. This bond is formed between two non-metals. For Example: [tex]H_2O,SO_2[/tex] etc..

For the given options:

Option A:  [tex]OCl_2[/tex]

Oxygen and chlorine both are non-metals. Thus, it is forming a covalent compound.

Option B:  [tex]Na_2O[/tex]

Sodium is a metal and oxygen is a non-metal. Thus, it is forming an ionic compound and contain oppositely charged ions.

Option C:  [tex]NH_3[/tex]

Nitrogen and hydrogen both are non-metals. Thus, it is forming a covalent compound.

Option D:  [tex]SCl_2[/tex]

Sulfur and chlorine both are non-metals. Thus, it is forming a covalent compound.

Hence, the correct answer is Option B.

H2SO3 or sulfurous acid is actually a strong acid. We know for a fact that strong acids completely dissociate into its component ions in a solution, that is:

H2SO3 -->  2H+  +  SO3-

So from the equation above, there are 2 moles of H+

Answer:

123 g

Explanation:

1 mole of H₂SO₄ contains 6.02 × 10²³ molecules of H₂SO₄ (Avogadro's number). The moles of H₂SO₄ represented by 7.50 × 10²³ molecules of H₂SO₄ are:

7.50 × 10²³ molecules × (1 mol/ 6.02 × 10²³ molecules) = 1.25 mol

The molar mass of H₂SO₄ is 98.08 g/mol. The mass of H₂SO₄ represented by 1.25 mol is:

1.25 mol × (98.08 g/mol) = 123 g

The mass of 7.5 x 10²³ molecules of H₂SO₄ is 122.5 g.

One mole of a substance contains 6.02 x 10²³ molecules of the substance.

6.02 x 10²³ molecules --------------- one mole of H₂SO₄

7.5 x 10²³ molecules --------------------- ?

[tex]x = \frac{7.5 \times 10^{23}}{6.02 \times 10^{23}} \\\\x = 1.25 \ moles[/tex]

1 mole ------ 98 g/mol

1.25 moles ----- ?

= 1.25 x 98

= 122.5 g

Thus, the mass of 7.5 x 10²³ molecules of H₂SO₄ is 122.5 g.

Learn more about Avogadro's number here: https://brainly.com/question/8946174

The long form periodic table's complexity and size can be intimidating and impractical for quick reference, despite its comprehensive nature and utility in illustrating advanced chemical concepts like electron configurations and valence.

While the periodic table is an indispensable tool in chemistry for organizing elements and predicting their properties based on periodic trends, the long form of the periodic table has certain disadvantages. One drawback is its complexity; with the inclusion of all known elements, the table can appear cluttered and intimidating, which may hinder the learning process for students. Furthermore, the division of elements into blocks can sometimes obscure the similarities between elements that are not immediately adjacent but still share chemical properties.

Another disadvantage of the long form periodic table is related to its size and layout. It is not as compact as the short form, which can make it less convenient for quick reference or when space is limited. Additionally, the long form can be less practical for graphical representation in textbooks and educational materials, where a simpler representation might be more beneficial.

Despite these downsides, it must be emphasized that developments in the periodic table, which include the long form, have enabled scientists and educators to illustrate and discuss valence, electron configuration, and the justification for the element's layout in the table. However, the complexity can occasionally make it less accessible for initial learning.

https://brainly.com/question/5702789

#SPJ3

Explanation:

Ionization energy is defined as the energy necessary to remove an electron from a gaseous atom or ion.

Therefore, smaller is the size of an atom or ion more energy it needs to remove an electron because more is the charge on an ion smaller will be its size.

Hence, more will be the attraction between nucleus and valence electrons of the atom. So, more difficulty is faced by the atom to lose an electron. As a result, ionization energy will increase.

Across the period, there will be decrease in size of elements of the periodic table.

Thus, we can conclude that there will be increase in first ionization energy across the periodic table.

The concentration of hydroxide ions in a solution with pH of 9 is 10⁶ times more than that of a solution with pH of 3.

The pH of a solution is measured as a negative logarithm of the concentration of hydrogen ions present in the solution.

Mathematically, pH is represented as:

pH = -log [H⁺]

Similarly, the pOH is expressed as: pOH = -log [OH⁻]

The sum of the value of the pH and the value of pOH is equal to 14.

pH  + pOH = 14

Given, solution 1 with pH = 9. Then the value of pOH =  14 - pH

(pOH)₁ = 14 - 9 = 5

For solution 2 with pH = 3. Then the value of pOH =  14 - pH

(pOH)₂ = 14 - 3 = 11

The concentration of the hydroxide ions for solution 1 is:

pOH = -log [OH⁻]

5 = -log [OH⁻]

[OH⁻]₁ = 10⁻⁵

The concentration of the hydroxide ions for solution 2 is:

pOH = -log [OH⁻]

11 = -log [OH⁻]

[OH⁻]₂ = 10⁻¹¹

Now the ratio of the concentration of hydroxide ions for both solutions:

[OH⁻]₁/ [OH⁻]₂ = 10⁻⁵/ 10⁻¹¹

[OH⁻]₁ = 10⁶ [OH⁻]₂

Therefore, the hydroxide ions in a solution with pH of 9 is 10⁶ times more than that of a solution with pH of 3.

Learn more about pH and pOH, here:

https://brainly.com/question/17144456

#SPJ2

An excited state configuration for lithium could be 1s²2p¹, showing that the electron from the 2s orbital has moved to the 2p orbital after absorbing energy.

The main answer to the question regarding which electron configuration represents an atom of lithium in an excited state involves understanding that in an excited state, electrons have absorbed energy and have moved to a higher energy orbital than their ground state. For lithium, the ground state electron configuration is 1s²2s¹. In an excited state, the remaining electron from the 2s orbital may have jumped to the 2p orbital or even higher, such as 3s, depending on the amount of energy absorbed. A possible excited state configuration for lithium could thus be 1s²2p¹, indicating that the third electron has moved from the 2s to the 2p orbital.

Final answer:

A neutral magnesium (Mg) atom, with atomic number 12, has 2 electrons in its outermost shell.

Explanation:

The atom with atomic number 12 is magnesium (Mg), and according to its electronic configuration, it has 12 electrons.

In a neutral magnesium atom, the first shell (1s) is filled with 2 electrons, the second shell (2s and 2p) contains a total of 8 electrons, and the third and outermost shell has 2 electrons, as expressed in the electronic configuration of Mg (1s²2s²2p¶3s²).

Therefore, the number of electrons in the outermost electron shell of an atom with atomic number 12 would be 2.