Answer: Option (D) is the correct answer.
Explanation:
When a dog runs faster then due to more force applied by the foot there occurs large footprints of the dog.
Spaces between the feet of dog increases due to running faster as running makes an individual to take long steps.
Whereas when a dog walks normally then his footprints will be smaller in size.
Therefore, we can conclude that the BEST alternative to Rob's conclusion is that one of the dogs ran faster than the other.
17.
What do you know about a chemical compound by looking at its chemical formula
Answer:
The number and the kinds of atoms in the compound
Explanation:
A chemical formula of a compound contains symbols o the atoms of the elements present in the compound as well as the number of atoms of each element in the form of subscripts.Therefore it helps us to know the elements in a compound and the number of atoms in the compounds.How are the colors in neon signs changed?
Answer:
Neon lights don't actually change colors.
Explanation:
Neon signs give the illusion of changing color by turning different components of the signs on or off.
Answer:
The color of the light depends on the gas in the tube. Neon lights were named for neon, a noble gas which gives off a popular orange light, but other gases and chemicals are used to produce other colors, such as hydrogen (red), helium (yellow), carbon dioxide (white), and mercury (blue).
Explanation:
those are all the color signs i know this because i did it before
Since the moon is so small in size in relation to the earth, only a small area of planet earth will see a:
lunar eclipse
corona
solar eclipse
Answer:
Solar eclipse
Explanation:
convert 6.35 grams of aluminum sulfate to moles
Answer:
There are 0.0186 moles of formula units in 6.35 grams of aluminum sulfate [tex]\rm Al_2(SO_4)_3[/tex].
Explanation:
What's the empirical formula of aluminum sulfate?
Sulfate is an anion with a charge of -2 per ion. When sulfate ions are bonded to metals, the compound is likely ionic.
Aluminum is a group III metal. Its ions tend to carry a charge of +3 per ion.
The empirical formula of an ionic compound shall balance the charge on ions with as few ions as possible.
The least common multiple of 2 and 3 is 6. That is:
Three sulfate ions [tex]\rm {SO_4}^{2-}[/tex] will give a charge of -6. Two aluminum ions [tex]\rm Al^{3+}[/tex] will give a charge of +6.Pairing three [tex]\rm {SO_4}^{2-}[/tex] ions with two [tex]\rm Al^{3+}[/tex] will balance the charge. Hence the empirical formula: [tex]\rm Al_2(SO_4)_3[/tex].
What's the mass of one mole of aluminum sulfate? In other words, what's the formula mass of [tex]\rm Al_2(SO_4)_3[/tex]?
Refer to a modern periodic table for relative atomic mass data:
Al: 26.982;S: 32.06;O: 15.999.There are
two Al, three S, andtwelve Oin one formula unit of [tex]\rm Al_2(SO_4)_3[/tex].
Hence the formula mass of [tex]\rm Al_2(SO_4)_3[/tex]:
[tex]\underbrace{2\times 26.982}_{\rm Al} + \underbrace{3\times 32.06}_{\rm S} + \underbrace{12\times 15.999}_{\rm O} = \rm 342.132\;g\cdot mol^{-1}[/tex].
How many moles of formula units in 6.35 grams of [tex]\rm Al_2(SO_4)_3[/tex]?
[tex]\displaystyle n = \frac{m}{M} = \rm \frac{6.35\;g}{342.132\;g\cdot mol^{-1}} = 0.0186\;mol[/tex].
the number of protons and neutrons in an atom is known as the
A.) isotope. B.) atomic number. C.) mass number. D.) energy level.
Answer:
Its B. Just look at google.
Answer:
The number of protons and neutrons in an atom is known as the mass number. C.)
Which of the following is not present in an atom?
Electron
Element
Neutron
Proton
Answer:
Element
Explanation:
since electron,neutron,and proton are inside of an atom, the answer would be elements, since elements are made up of atoms, but not present in the atom itself.
Answer:
b
Explanation:
In your own words describe the process of a physical change
Answer:
Explanation:
The changes that matter undergoes are associated with properties.
A physical change is one that alters the physical properties of matter. The physical properties of matter tells us everything about what a substance is when no change is occurring to its constituents. Such properties can be observed with our senses or instruments or pieces of apparatus. Examples are state of matter, colour, odour, taste, texture etc.
In many ways, physical changes are easily reversible and required little energy to initiate. There is no change in mass and no new kinds of matter are produced.
Examples of physical changes are boiling, melting, freezing, condensation, sublimation, magnetization of metals, breaking of glass, cutting of wood.
Among the four ecosystems, is the most diverse. In the second ecosystem, there are 4 species of producers, 8 primary consumers, 10 secondary consumers, and 10 tertiary consumers. If the number of species of primary consumers in the second ecosystem increases to 20, there will be .
Species will be four secondary and tertiary consumers will be 25
Explanation-
Given in the question the number of species is 4 then it will have 8 primary 10 secondary and 10 tertiary consumers. If this number of primary consumers increases from 8 to 20 consumers then the number of species involved would be 10 { 4x20/8 }
Number of secondary consumers would also be increased and increased value would be 25 { 10x20/8 } then again comes the tertiary number of consumer which also increases. The number of tertiary consumers will increase to 25 { 10x20/8} same as secondary.
Among the four ecosystems, ecosytem 3 is the most diverse. In the second ecosystem, there are 4 species of producers, 8 primary consumers, 10 secondary consumers, and 10 tertiary consumers. If the number of species of primary consumers in the second ecosystem increases to 20, there will be fewer producers in the ecosystem.
A scientist has three liquids in a beaker. Liquid 1 is the top layer, liquid 2 is the middle layer, and liquid 3 is the bottom layer. Write the order of the liquids from most dense to least dense.
Answer:
3>2>1
Explanation:
Liquid 3 is the densest and liquid 1 is the least dense of all. Liquid 2 would be in the middle as its density lies between that of liquids 1 and 3.
Density can be defined as the mass per unit volume of a liquid.
The more the mass the greater the density. Density increases with increasing mass of solute. We see that density shares a direct proportionality with mass.
In terms of volume, the more the volume of solvents the lesser the density. When we dilute some solutions, we tend to reduce their density. Density shares an inverse relationship with volume.
The densest solutions would go below while the least dense goes up.
Can someone help me with Geography connection plz.
Hello There!
South of the equator, some crops grown were beans, cotton, peanuts, peppers, potatoes, coffee, millet and yams
Why does every chemical reaction require a certain amount of activation energy?
A. Energy is released when the reactants begin to react.
B. Energy lost to the environment during the reaction must be replaced.
C. Forming the activated complex requires energy,
D.The products have more potential energy than the activated complex.
E. The reactants have less potential energy than the products,
E is the correct answer because both endothermic and exothermic reactions require activation energy. the reactants have less potential energy than do the products. Energy must be input in order to raise the particles up to the higher energy level.
Answer:
C. Forming the activated complex requires energy,
Explanation:
For any reaction (whether exothermic or endothermic) the reactant molecules need some minimum amount of energy known as Threshold energy.
Reactant molecules have some internal energy and they require some extra amount of energy to reach the threshold energy which is known as activation energy.
This activation energy is required to from an activated complex.
The activated complex is formed where reactant molecules come closer to each other and undergo effective collision. This causes the formation of products.
Hey sample of helium occupies 235 mL at 788 tour and 25°C. If the sample is condensed into a 0.115 L flask what will be the new pressure assuming constant temperature?
The new pressure of helium gas assuming constant temperature is equal to 1610.26 Torr.
Given the following data:
Initial volume = 235 mLFinal volume = 0.115 LInitial pressure = 788 TorrTemperature = 25°C.Conversion:
Initial volume = 235 mL to L = [tex]\frac{235}{1000} = 0.235\;L[/tex]
To determine the new pressure assuming constant temperature, we would apply Boyle's law:
Mathematically, Boyle's law is given by the formula;
[tex]PV = k\\\\P_1V_1 = P_2V_2[/tex]
Where;
[tex]P_1[/tex] is the original (initial) pressure.[tex]P_2[/tex] is the final pressure.[tex]V_1[/tex] is the original (initial) volume.[tex]V_2[/tex] is the final volume.Substituting the given parameters into the formula, we have;
[tex]788\times 0.235 = P_2 \times 0.115\\\\185.18 = 0.115P_2\\\\P_2 = \frac{185.18}{0.115} \\\\P_2 =1610.26\; Torr[/tex]
Find more information: https://brainly.com/question/1437490
The new pressure assuming constant temperature would be 1610.43 torr.
Given values:
Initial volume (V₁) = 235 mL = 0.235 L ( converted to liters)Initial pressure (P₁) = 788 torrInitial temperature (T₁) = 25°C = 298 K (converted to Kelvin)Final volume (V₂) = 0.115 LTemperature remains constant (T₂ = T₁ = 298 K)Goal: Find the new pressure (P₂) in torr.
Ideal Gas Law:
We can use the ideal gas law, which states: P₁V₁ = P₂V₂Since the temperature remains constant, we can simplify the equation to: P₁V₁ = P₂V₂Rearrange to solve for P₂: P₂ = P₁V₁ / V₂Plug in the values: P₂ = (788 torr) × (0.235 L) / (0.115 L)Calculate P₂: P₂ ≈ 1610.43 torrTherefore, the new pressure assuming constant temperature would be 1610.43 torr.
which of the following statements about natural resources is correct
solar power produces harmful chemicals
geothermal power requires more land than other power plants
nuclear power produces small amounts of energy from large masses
wind power requires a lot of space and depends on local weather patterns
Answer:
The right choice is "wind power requires a lot of space and depends on local weather patterns "
Explanation:
solar power produces harmful chemicals it is incorrect because solar power doesn't produce any chemicals2. geothermal power requires more land than other power plants
it is incorrect because geothermal power requires digging a stable 5 km-deep shaft not a land3. nuclear power produces small amounts of energy from large masses
it is incorrect because nuclear power produces large amounts of energy from small masses.So the right choice is "wind power requires a lot of space and depends on local weather patterns "
how much ammonium chloride is needed to saturate 100 grams of water at 60 degrees Celsius
Answer:
55.3 g / 100.0 g of water.
Explanation:
From the solubility curve determine the solubility of ammonium chloride in g/100 g of water at 60°C.The theoretical value is 55.3 g.
20 elements of the periodic table
Answer:
Explanation:
Hydrogen is a nonmetallic, colorless gas under ordinary conditions. It becomes an alkali metal under extreme pressure.
Atomic Number: 1
Symbol: H
Atomic Mass: 1.008
Electron Configuration: 1s1
Group: group 1, s-block, nonmetal
Helium is a light, colorless gas that forms a colorless liquid.
Atomic Number: 2
Symbol: He
Atomic Mass: 4.002602(2)
Electron Configuration: 1s2
Group: group 18, s-block, noble gas
Lithium is a reactive silver metal.
Atomic Number: 3
Symbol: Li
Atomic Mass: 6.94 (6.938–6.997)
Electron Configuration: [He] 2s1
Group: group 1, s-block, alkali metal
Beryllium is a shiny gray-white metal.
Atomic Number: 4
Symbol: Be
Atomic Mass: 9.0121831(5)
Electron Configuration: [He] 2s2
Group: group 2, s-block, alkaline earth metal
Boron is a gray solid with a metallic luster.
Atomic Number: 5
Symbol: B
Atomic Mass: 10.81 (10.806–10.821)
Electron Configuration: [He] 2s2 2p1
Group: group 13, p-block, metalloid
Carbon takes several forms. It's usually a gray or black solid, although diamonds may be colorless.
Atomic Number: 6
Symbol: C
Atomic Mass: 12.011 (12.0096–12.0116)
Electron Configuration: [He] 2s2 2p2
Group: group 14, p-block, usually a nonmetal although sometimes considered a metalloid
Nitrogen is a colorless gas under ordinary conditions. It cools to form a colorless liquid and solid forms.
Atomic Number: 7
Symbol: N
Atomic Mass: 14.007
Electron Configuration: [He] 2s2 2p3
Group: group 15 (pnictogens), p-block, nonmetal
Oxygen is a colorless gas. Its liquid is blue. Solid oxygen may be any of several colors, including red, black, and metallic.
Atomic Number: 8
Symbol: O
Atomic Mass: 15.999 or 16.00
Electron Configuration: [He] 2s2 2p4
Group: group 16 (chalcogens), p-block, nonmetal
Fluorine is a pale yellow gas and liquid and bright yellow solid. The solid may be either opaque or translucent.
Atomic Number: 9
Symbol: F
Atomic Mass: 18.998403163(6)
Electron Configuration: [He] 2s2 2p5
Group: group 17, p-block, halogen
Neon is a colorless gas that emits a characteristic orange-red glow when excited in an electric field.
Atomic Number: 10
Symbol: Ne
Atomic Mass: 20.1797(6)
Electron Configuration: [He] 2s2 2p6
Group: group 18, p-block, noble gas
Sodium is a soft, silvery-white metal.
Atomic Number: 11
Symbol: Na
Atomic Mass: 22.98976928(2)
Electron Configuration: [Ne] 3s1
Group: group 1, s-block, alkali metal
Magnesium is a shiny gray metal.
Atomic Number: 12
Symbol: Mg
Atomic Mass: 24.305
Electron Configuration: [Ne] 3s2
Group: group 2, s-block, alkaline earth metal
Aluminum is a soft, silver-colored, nonmagnetic metal.
Atomic Number: 13
Symbol: Al
Atomic Mass: 26.9815385(7)
Electron Configuration: [Ne] 3s2 3p1
Group: group 13, p-block, considered a post-transition metal or sometimes a metalloid
Silicon is a hard, blue-gray crystalline solid that has a metallic luster.
Atomic Number: 14
Symbol: Si
Atomic Mass: 28.085
Electron Configuration: [Ne] 3s2 3p2
Group: group 14 (carbon group), p-block, metalloid
Phosphorus is a solid under ordinary conditions, but it takes several forms. The most common are white phosphorus and red phosphorus.
Atomic Number: 15
Symbol: P
Atomic Mass: 30.973761998(5)
Electron Configuration: [Ne] 3s2 3p3
Group: group 15 (pnictogens), p-block, usually considered a nonmetal, but sometimes a metalloid
Sulfur is a yellow solid.
Atomic Number: 16
Symbol: S
Atomic Mass: 32.06
Electron Configuration: [Ne] 3s2 3p4
Group: group 16 (chalcogens), p-block, nonmetal
Chlorine is a pale yellow-green gas under ordinary conditions. Its liquid form is bright yellow.
Atomic Number: 17
Symbol: Cl
Atomic Mass: 35.45
Electron Configuration: [Ne] 3s2 3p5
Group: group 17, p-block, halogen
Argon is a colorless gas, liquid, and solid. It emits a bright lilac-purple glow when excited in an electric field.
Atomic Number: 18
Symbol: Ar
Atomic Mass: 39.948(1)
Electron Configuration: [Ne] 3s2 3p6
Group: group 18, p-block, noble gas
Potassium is a reactive, silvery metal.
Atomic Number: 19
Symbol: K
Atomic Mass: 39.0983(1)
Electron Configuration: [Ar] 4s1
Group: group 1, s-block, alkali metal
Calcium is a dull silver metal with a faint yellowish cast.
Atomic Number: 20
Symbol: Ca
Atomic Mass: 40.078(4)
Electron Configuration: [Ar] 4s2
Group: group 2, s-block, alkaline earth metal
Hope That Helps!
Brainliest?
(the other person copied it from Google).
A light year is approximately ____.
A) 9.5 trillion kilometers
B) 95 trillion kilometers
C) 150 million kilometers
D) 150 billion kilometers
Answer : A light year is approximately 9.5 trillion kilometers - A)
Answer:
the answer is A) 9.5 trillion kilometers
Explanation:i got you ny g m
A sample of gas in a balloon has an initial temperature of 20. ∘C and a volume of 1.92×103 L . If the temperature changes to 68 ∘C , and there is no change of pressure or amount of gas, what is the new volume, V2, of the gas?
Answer:
[tex]\boxed{2.23 \times 10^{3} \text{ L}}[/tex]
Explanation:
The pressure is constant, so we can use Charles' Law.
[tex]\dfrac{ V_{1} }{T_{1}} = \dfrac{ V_{2} }{T_{2}}[/tex]
Data:
V₁ = 1.92 × 10³ L; T₁ = 20 °C
V₂ = ?; T₂ = 68 °C
Calculations:
(a) Convert temperatures to kelvins
T₁ = (20 + 273.15) K = 293.15 K
T₂ = (68 + 273.15) K = 341.15 K
(b) Calculate the volume
[tex]\dfrac{ 1.92 \times 10^{3}}{293.15} = \dfrac{ V_{2}}{341.15}\\\\6.550 = \dfrac{ V_{2}}{341.15}\\\\V_{2} = 6.550 \times 341.15 = 2.23 \times 10^{3} \text{ L}[/tex]
The new volume of the gas is [tex]\boxed{2.23 \times 10^{3} \text{ L}}[/tex].
The molecular weight of vitamin C , C6H8O6 is 176.12 grams over mol
What is the mass in grams of 0.000142 mole of vitamin C Express the answer using three significant figures
Answer:
0.0250 g.
Explanation:
∵ no. of moles (n) = mass / molar mass.
∴ mass of Vitamine C = (n)(molar mass) = (0.000142 mol)(176.12 g/mol) = 0.02501 g = 0.0250 g. "three significant figures"
Select all that apply. The density of an object is 0.950 g/cm3. It will float in which of the following materials? water, density = 1.00 g/cm3 olive oil, density = 0.920 g/cm3 ethyl alcohol, density = 0.789 g/cm3 citric acid, density = 1.660 g/cm3
Answer:
The object will float in water and citric acid.
Explanation:
The density of an object indicates if the object will sink or float in another substance:The object will float, if it is less dense than the substance it is placed in.
The object will sink, if it is more dense than the substance it is placed in.
The object has density of (0.95 g/cm³) is less dense than water (density = 1.00 g/cm³) and citric acid (density = 1.660 g/cm³), so it will float in water and citric acid.The object has density of (0.95 g/cm³) is more dense than olive oil (density = 0.920 g/cm³) and ethyl alcohol (density = 0.789 g/cm³), so it will sink in olive oil and ethyl alcohol.So, the object will float in water and citric acid.
Plz Help! If 0.0025 mol NaNO3 forms during the reaction, what is the concentration of NaNO3 in the final solution?
Please give a step-by-step solution to this problem.
Answer:
Hi! I hope this will help
you with your question, whether this is an assignment or not. The answer that I
get is 0.033 concentration.
If 0.0025 mol NaNo3 forms
during the reaction, the concentration of NaNO3 in the final solution should be
0.033.
The concentration of NaNO₃ in the final solution, considering the sum of the given volumes, is approximately 0.276 M.
To find the concentration of NaNO₃ in the final solution, we need to know the volume of the solution. However, since it's not provided in the question or the additional information, we'll assume that the final volume of the solution is the sum of the volumes given in the reference information (0.2L from Na+ and 50mL + 40mL for NO₃).
Step 1: Convert mL to Liters for NO₃ since the concentrations are in Molarity (moles/liter). Therefore, the total volume in liters is 0.2L + 0.05L + 0.04L = 0.29L.
Step 2: We know from the information given that 0.08 mol of NaNO3 is produced. Since this is less than the stated 0.0025 mol, we will use 0.08 mol as the correct value.
Step 3: Calculate the concentration in moles/Liter (Molarity) using the formula C = n/V, where 'C' is concentration, 'n' is the number of moles, and 'V' is the volume in liters. This gives us C = 0.08 mol / 0.29 L = approx 0.276 M NaNO₃.
The concentration of NaNO₃ in the final solution is approximately 0.276 M.
Latoya performs an experiment using the lab equipment shown. Which two properties is Latoya most likely measuring?
Answer: Volume and temperature
Explanation:
Answer:
volume and temperature
Explanation:
The amount of heat involved in the synthesis of 1 mole of a compound from its elements, with all substances in their standard states at 25°C, is called _____.
A) standard heat of formation
B) heat of solidification
C) enthalpy
D) heat of reaction
Answer:
A
Explanation:
Answer:
A) standard heat of formation
Explanation:
Compare the densities of hydrogen, oxygen, and water.
Answer:
Water is a compound made up of two elements—hydrogen and oxygen. ... They are both colorless, odorless gases , and they both readily react with other elements—making them "reactive" elements. But in many ways they are very different from each other. Hydrogen has the lowest density of all the elements.
what are crystalline solids
Answer:
A solid material whose constituents (such as atoms, molecules, or ions) are arranged in a highly ordered microscopic structure, forming a crystal lattice that extends in all directions.
Explanation:
Solids that have a regular and three-dimensional arrangement of constituent particles such as (atoms, molecules, or ions) are known as crystalline solids. A few examples of crystalline solids include sodium chloride, quartz, diamond, etc. There are four types of crystals:
ionic , metallic , covalent network,molecularIn crystalline solids, particles are arranged in a repeating pattern. They have a regular and ordered arrangement resulting in a definite shape.
Find more information about Crystalline solid here:
brainly.com/question/4795632
what is the volume of 12.0 grams of oxygen gas at STP
Atomic mass:O = 15.99 grams/moles
Answer:
16.82 L.
Explanation:
We can use the general law of ideal gas: PV = nRT.where, P is the pressure of the gas in atm (P = 1.0 atm, STP conditions).
V is the volume of the gas in L (V = ??? L).
n is the no. of moles of the gas in mol (n = mass/molar mass = (12.0 g)/(15.99 g/mol) = 0.7505 mol).
R is the general gas constant (R = 0.0821 L.atm/mol.K),
T is the temperature of the gas in K (T = 0.0°C + 273 = 273.0 K, STP conditions).
∴ V = nRT/P = (0.7505 mol)(0.0821 L.atm/mol.K)(273.0 K)/(1.0 atm) = 16.82 L.
A toaster transforms electrical energy into _____ energy and _____ energy. A. heat; light B. heat; kinetic C. heat; potential D. kinetic; potential
A. heat; light energies
Answer:
the answer is A; firstly heat then heat light.
Which of these is not an environmental effect of deforestation? overcrowding flooding smog soil erosion
Answer:
Soil
Explanation:
Overcrowding is not considered as environmental effect of deforestation.
Explanation:Trees provide various advantages to the living beings. It acts as shelter to animal, birds and human beings. It provides various raw materials for the industry. Apart from this it checks the flooding, prevents soil erosion and protects the environment from smog formation.
Deforestation refers to the process in which many trees are uprooted and destroyed. When trees are harmed it leads to stoppage of advantage caused by them. Overcrowding is not considered as environmental effect of deforestation as it has no relationship with deforestation.
1. What is the specific heat of a substance that absorbs 2500 joules of heat when a sample of 100
g of the substance increases in temperature from 10 °C to 70°C?
Answer:
0.4167 J/°C.g.
Explanation:
To solve this problem, we can use the relation:Q = m.c.ΔT,
where, Q is the amount of heat absorbed by substance (Q = 2500 J).
m is the mass of the substance (m = 100 g).
c is the specific heat of the substance (c = ??? J/°C.g).
ΔT is the difference between the initial and final temperature (ΔT = final T - initial T = 70°C - 10°C = 60°C).
∵ Q = m.c.ΔT
∴ c = Q/(m.ΔT) = (2500 J)/(100 g)(60°C) = 0.4167 J/°C.g.
The study of the chemical and bond is called chemistry. According to the law of thermodynamics, the heat transfer from the high temperature to the low temperature.
The correct answer to the question is 0.4167.
What is specific heat?The specific heat capacity of a substance is the heat capacity of a sample of the substance divided by the mass of the sample. Specific heat is also sometimes referred to as mass heat capacity.
To solve this problem, we can use the relation:
Q = m.c.ΔT,
where,
Q is the amount of heat absorbed by a substance (Q = 2500 J).M is the mass of the substance (m = 100 g).C is the specific heat of the substance (c = ??? J/°C.g).ΔT is the difference between the initial and final temperature (ΔT = final T - initial T = 70°C - 10°C = 60°C).Q = m.c.T
After the equation, we can get.
c = [tex]\frac{Q}{(m.T)} = \frac{(2500 J)}{(100 g)(60C)}\\ \\ = 0.4167[/tex]
Hence, the correct answer is 0.4167.
For more information about the heat, refer to the link:-
https://brainly.com/question/4147359
Isotopes are separated by
A. crystallisation
B. sublimation
C. distillation
D. filtration
In an atomic explosion, enormous energy is released which is due to
A. conversion of chemical energy into heat energy
B. conversion of mechanical energy into nuclear energy
C. conversion of mass into energy
D. conversion of neutrons into protons
Which among the following is a positively charged particle emitted by a radioactive element?
A. Beta ray
B. Alpha ray
C. Cathode ray
D. Gamma ray
Answer:
1. C. distillation
2. B. conversion of mechanical energy into nuclear energy
3. B. Alpha ray
Explanation:
Finding the pH for [H+] = 9.4 * 10-3 M?
Answer:
pH = 2.0
Explanation:
To find the pH of a solution, take the -log[H+]. In this case, the -log(9.4 x 10^-3) equals 2.02687 which makes 2.0 when accounting for significant figures.