An object has a mass of 15 kg and is accelerating to the right at 16.3 m/s2. The free-body diagram shows the horizontal forces acting on the object.



What is the frictional force, Ff, acting on the object?

5.5 N
15 N
244.5 N
494.5 N



Answer :
5.5 N

Answers

Answer 1
Refer to the free body diagram shown melow.

F =  applied force
R =  frictional force
m = 15 kg, the mass of the object

The acceleration (to the right) is 16.3 m/s², therefore
F - R = (15 kg)*(16.3 m/s²) = 244.5 N

The normal reaction is
N = mg = (15 kg)*(9.8 m/s²)  = 147 N
The frictional force is
R = μN = 147μ N,  where μ =  coefficient of kinetic friction.

Let us check possible answers:
If R = 5.5 N, then μ = 5.5/147 = 0.0374 (very likely)
If R = 15 N, then μ = 15/147 = 0.102 (possible)
If R = 244.5 N,   (Highly unlikely, exceed mg)
If R = 494.5 N, (highly unlikely, exceeds mg)

Answer:
The most reasonable answer is R = 5.5 N
An Object Has A Mass Of 15 Kg And Is Accelerating To The Right At 16.3 M/s2. The Free-body Diagram Shows
Answer 2

Answer:

Ff = 5.5 N

Explanation:

Given:

M: 15kg

A: 16.3 m/s2

We use:

[tex]f=ma[/tex]

force=mass*acceleration

[tex](15kg)(16.3m/s^{2} )=244.5N[/tex]

This means that 244.5 N is the net force on the object, and the right vector is showing 250 N, so to find the left vector - which would be a negative number (left direction) - we do

[tex](-Ff)+250N= 244.5N (net force)[/tex]

Which would give us 5.5 N in the left direction (Ff)

Hope This Helps!

An Object Has A Mass Of 15 Kg And Is Accelerating To The Right At 16.3 M/s2. The Free-body Diagram Shows

Related Questions

PLEASE HELP ME WITH THIS SCIENCE QUESTION!!! 12 points plus brainliest!!!

Select all that apply.

Which of the following are density labels? (you can pick more then one!)
kg/L
g/m
g/mL
cm^3/g

Answers

G/ml

Cm^3/g

I think thats it

Answer:

The correct options are kg/L and g/mL

Explanation:

The formula for density can be expressed as

Density = mass ÷ volume

where the mass can be in grams (g) or kilograms (kg) and the volume can be in cubic centimeter (cm³) or liter (L) respectively.

It should be noted that cubic centimeter (cm³) and milliliter (mL) have the same value. Liter (L) and cubic decimeter (dm³) have the same value also.

Hence, the units for density can be Kg/L or Kg/dm³, g/mL or g/cm³

From the above, it can be noted that kg/L and g/mL are the only correct options provided.

The outermost shell is referred to as the __________ shell. the electrons in the outermost shell are also referred to as the ____________ electrons.

Answers

The outermost shell is known as the valence shell. The electrons in this level are known as valence electrons.

A golfer, standing on a fairway, hits a shot to a green that is elevated 7.67 m above the point where she is standing. if the ball leaves her club with a velocity of 38.0 m/s at an angle of 33.9 ° above the ground, find the time that the ball is in the air before it hits the green.

Answers

4.22 seconds First, determine the vertical velocity of the ball. v = 38sin(33.9) = 38 * 0.591666616 = 22.48333142 m/s The altitude the ball will be at time T is given by d = vT - 0.5AT^2 where d = distance v = initial velocity A = acceleration due to gravity T = time. So plug in those values we know d = vT - 0.5AT^2 7.67 m = 22.483 m/s T - 0.5 9.8 m/s^2 T^2 7.67 m = 22.483 m/s T - 4.9 m/s^2 t^2 Convert into a quadratic equation 7.67 m = 22.483 m/s T - 4.9 m/s^2 t^2 0 = 22.483 m/s T - 4.9 m/s^2 T^2 - 7.67 m We now have a quadratic equation with a = -4.9, b = 22.483, and c = -7.67 Solve using the quadratic formula. Getting 2 roots at 0.371172 seconds and 4.217195 seconds. Let's see what we make of those 2 values and see which one answers our question. The golfer hits the ball and 0.371 seconds later the ball has climbed to the same level as the green. The ball continues to climb until its vertical velocity is eventually eliminated and it starts to fall. 4.217 seconds after being hit, the ball finally has fallen on the green. So the answer is 4.217 seconds, which when rounded to 3 significant figures is 4.22 seconds.

Final answer:

To find the time the golf ball is in the air before hitting the green, analyze the vertical component of the initial velocity to calculate the time of flight, which is around 3.44 seconds.

Explanation:

The time that the ball is in the air before it hits the green can be calculated using the vertical motion of the ball.

By analyzing the vertical component of the initial velocity, you can determine the time of flight using the equation for motion under gravity.

In this case, the time the ball is in the air is approximately 3.44 seconds.

If the moon rises around 3
a.m., its phase must be

Answers

new moon or cresant moon i believe

What angle can you kick a football that will make the initial vertical component of the velocity equal to the initial horizontal component of the velocity?

Answers

If the vertical and horizontal components of velocity are equal, then the object is moving in the direction of 45 degrees above the horizon.

Trigonometry allows finding the result for the angle for which the components of the velocity are equal is:  

 The angle is: θ = 45º

Trigonometry allows you to find the component of the vectors with the relationships.

              [tex]cos \theta = \frac{v_x}{v} \\sin \theta = \frac{v_y}{v}[/tex]  

             vₓ = v cos θ

             [tex]v_y[/tex]  = v sin sin θ

Indicates that the values ​​of the two components are equal therefore.

           [tex]v_y = v_x[/tex]

          sin θ = cos θ

The only angle where the sine and cosine values ​​are equal is 45º

In conclusion using trigonometry we can find the result for the angle for which the components of the velocity are equal is:

The angle is:   θ = 45º

Learn more here: brainly.com/question/20261153

A car is traveling at an average speed of 12m/s for 7.2 hours. How far did the car travel

Answers

multiply 12m/s by 7.2 hours 
12m/s x 7.2 hrs is the equal

What is the relationship between temperature and depth inside earth is this relationship the same for pressure?

Answers

As depth increases, pressure also increases.

Which statement best compares the properties of compounds and elements that the compounds contain?

A.They are always identical.

B.They are different.

C.They are similar.

D.They represent opposite characteristics.

Answers

A compound is formed due to the chemical combination or chemical reaction between two or more elements. The elements forming a compound cannot be separated by physical means. The properties of the compound is different from the properties of the elements forming it.

Based on this, the answer would be:
They are different.
Other Questions
A golfer, standing on a fairway, hits a shot to a green that is elevated 7.67 m above the point where she is standing. if the ball leaves her club with a velocity of 38.0 m/s at an angle of 33.9 above the ground, find the time that the ball is in the air before it hits the green. How did the constitution uphold the rights of the states while strengthening the national government? The density of platinum is 21.45 g/cm3 at 20 c. calculate the mass of 80.00 cm3 of platinum at this temperature. What type of statement are made by your teacher to indicate what you should include in your notes? Give 3 examples of these statements. Answers.com how long is one term for a member of the house of representatives? The economic development of the mid-atlantic, new england, and southern colonies differed mainly because of Which areas are the main sources of immigration to the United States today? Approximately how much more free energy is supplied to the electron transport chain by nadh than by fadh2? What is the equation of the following graph? Write it in both slope-intercept form and standard form. Help please, i dont know i tried. ms nickel has a jar of candy on her desk.jessica thinks there are 3,498 piece of candy in the jar there are actually 4,182 pieces.what is the difference between jessica's guess and the actual number of pieces of candy? Writing a summary of an essay, article, or other assigned reading material is an effective way to A. record your impressions. B. offer a critical analysis of the material. C. formally present your own response to the author's ideas. D. determine whether you've understood the material. When a number gets assigned to a variable that already has a value __________? Write forty and eight tenths as a decimal A reason an automobile engine is not considered to be living is that it is not able to American English has also been influenced greatly by _____.PakistaniFrenchNavajoLatinGreek The study of quality of life began with a branch of psychology called Which region has the largest number of the 10 most populous countries within its boundaries? Which method can chefs use to change orange juice to resemble caviar? what does a linkage institution help people do Steam Workshop Downloader