Calcium (Ca) is the atom that most likely forms a 2+ ion, due to its position in group 2 of the periodic table, which defines it as an alkaline earth metal.
Among the following, the atom most likely to form an ion with a charge of 2+ is Ca (Calcium). Calcium belongs to the alkaline earth metals (group 2) in the periodic table and tends to lose two electrons to form a cation with a 2+ charge, becoming Ca2+. This ion has 20 protons and 18 electrons, having the same number of electrons as an atom of the preceding noble gas, argon.
What type of solution is formed if 10 g of kclo3 are dissolved in 100g of water at 30
Answer:
Saturated solution.
Explanation:
Kindly see the attached image, the curve with brown line is for KClO₃, and according to the curve at 30 °C the solubility of KClO₃ per 100 g of water is 10 g.So, 10.0 g of KClO₃ forms a saturated solution.
When 10 g of KClO₃ are dissolved in 100 g of water at 30 degrees Celsius, a saturated solution is likely formed because the solubility of KClO₃ increases with temperature and is sufficient to dissolve this amount at 20 degrees Celsius.
The question is referring to the process of dissolving a chemical compound in water, which is a chemistry topic commonly studied in high school. When 10 g of KClO₃ (potassium chlorate) are dissolved in 100 g of water at 30℃, the type of solution that is formed depends on the solubility of KClO₃ at that temperature. Assuming the question implies 30 degrees Celsius, potassium chlorate has a solubility of about 7 g per 100 mL of water at 20℃. Since solubility generally increases with temperature, it's likely that the 10 g of KClO₃ will fully dissolve in 100 g of water at 30℃ to form a saturated solution. If all the solute dissolves, the solution is known as saturated; if the solute does not fully dissolve, any undissolved solute would result in a supersaturated solution if the excess was initially forced to dissolve under different conditions, or an unsaturated solution if there is still room for more solute to dissolve.
What is scientific law how does a hypothesis become a law
Answer:
In general, a scientific law is the description of an observed phenomenon. It doesn't explain why the phenomenon exists or what causes it. The explanation of a phenomenon is called a scientific theory. It is a misconception that theories turn into laws with enough research.
Explanation:
Answer:
A scientific law is a description of an observed phenomenon.this is not an explanation of a phenomenon but a description.
Hypothesis becomes a law when they follow a line of reasoning and formulate a theory.then once a theory has been evaluated through a series of testing it becomes a law.
Hope this helps and if it does pls mark as brainliest answer
PLEASE HELP!!!
WILL GIVE BRAINLIEST!!!!
Is this a strong positive linear association or something else?
Answer:
Yes; the graph shows a strong positive linear association.
Explanation:
Majority of the points outline a line of the graph. There are only a few outliers.
Which of the following is a sign a chemical reaction has occurred?
Answer:
2. A piece of metal is placed in water and produces sparks and gas
Explanation:
The production of gas is usually a sign of a chemical reaction. The metal is reacting with the water to form a new substance (the gas).
Incorrect answers and why:
1. Changing colors can be a sign of a chemical reaction, but in this case it's more likely that the colors blended together. (If it was something like two clear liquids combining to form a yellow liquid, then it would be more clear evidence of a chemical reaction)
3. The liquid is boiling
4. The powder dissolved into the liquid
I hope this helps!
The statement that is a sign a chemical reaction has occurred is a piece of metal is placed in water and produces sparks and gas. The correct option is b.
What is a chemical reaction?A chemical reaction is a process in which two or more substances called reactants react to form a different substance or compound, called a product. The metal reacts with water and forms gas and sparks in a chemical reaction.
Although a chemical reaction might cause colors to change, in this case, it's more likely that the hues just mixed. (If it involved the blending of two clear liquids to create a yellow liquid, that would be more convincing proof of a chemical reaction.)
Thus, the correct option is b. A piece of metal is placed in water and produces sparks and gas.
To learn more about a chemical reaction, refer to the below link:
https://brainly.com/question/3461108
#SPJ2
HELP NEED HELP PLEASE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer: B) 4.2 M
Explanation:
Molarity = moles of solute/litre of solution
1560mL/1000 = 1.56 litres
6.5/1.56 = x/1
x = 4.2
M of solution = 4.2
What is the percent by mass of sodium in Na2SO4?
Answer:
= 32.39 %
Explanation:
The relative atomic mass of sodium is 23, sulphur 32 while oxygen as a relative atomic mass of 16.
I mole of Na₂SO₄ has a relative mass of 2(23) + 32 + 4(16) = 142 grams
Of the value 142, the contribution of sodium is 2×23 =46
Thus the % composition is calculated:
46/142×100%= 32.39%
You start with 0.050 moles of ammonia in 500. mL of water. The equilibrium constant Keq is 1.8 × 10–5. What is the pH of this solution at equilibrium? Please show work!
Answer:
[tex]\boxed{11.13}[/tex]
Explanation:
The chemical equation is
[tex]\rm NH$_{3}$ + \text{H}$_{2}$O \, \rightleftharpoons \,$ NH$_{4}^{+}$ +\text{OH}$^{-}$[/tex]
For simplicity, let's rewrite this as
[tex]\rm B + H$_{2}$O \, \rightleftharpoons\,$ BH$^{+}$ + OH$^{-}$[/tex]
1. Initial concentration of NH₃
[tex]\text{[B]} = \dfrac{\text{moles}}{\text{litres}} = \dfrac{\text{0.050 mol}}{\text{0.500 L}} = \text{0.100 mol/L}[/tex]
2. Calculate [OH]⁻
We can use an ICE table to do the calculation.
B + H₂O ⇌ BH⁺ + OH⁻
I/mol·L⁻¹: 0.100 0 0
C/mol·L⁻¹: -x +x +x
E/mol·L⁻¹: 0.100 - x x x
[tex]K_{\text{b}} = \dfrac{\text{[BH}^{+}]\text{[OH}^{-}]}{\text{[B]}} = 1.8 \times 10^{-5}\\\\\dfrac{x^{2}}{0.100 - x} = 1.8 \times 10^{-5}[/tex]
Check for negligibility:
\[tex]\dfrac{0.100 }{1.8 \times 10^{-5}} = 5600 > 400\\\\ x \ll 0.100[/tex]
3. Solve for x
[tex]\dfrac{x^{2}}{0.100} = 1.8 \times 10^{-5}\\\\x^{2} = 0.100 \times 1.8 \times 10^{-5}\\\\x^{2} = 1.80 \times 10^{-6}\\\\x = \sqrt{1.80 \times 10^{-6}}\\\\x = \text{[OH]}^{-} = 1.34 \times 10^{-3} \text{ mol/L}[/tex]
4. Calculate the pH
[tex]\text{pOH} = -\log \text{[OH}^{-}] = -\log(1.34 \times 10^{-3}) = 2.87\\\\\text{pH} = 14.00 - \text{pOH} = 14.00 - 2.87 = \mathbf{11.13}\\\\\text{The pH of the solution at equilibrium is } \boxed{\mathbf{11.13}}[/tex]
What happens to an atom of sulfur (S) if it loses an electron?
Answer:
An atom becomes anion when it gains or loses electrons. The ions that are formed when an atom loses electrons are positively charged because they have more protons in the nucleus than electrons in the electron cloud.
Explanation:
Please mark brainliest and have a great day!
Answer: Sulfur atom will form a cation on loosing electrons.
Explanation:
There are 3 subatomic particles present in an atom. They are: protons, electrons and neutrons.
Protons carry positive charge, electrons carry negative charge and neutrons does not carry any charge.
Any neutral atom has equal number of protons and electrons.
An ion is formed when atom looses or gain electron.
If an atom gains electrons, it will have more number of electrons than protons. Thus, it will carry negative charge and form an anion.
If an atom looses electrons, it will have less number of electrons than protons. Thus, it will carry positive charge and forms a cation.
It is given that sulfur atom looses an electron. So, this atom will have more number of protons than electrons. Thus, it will form a cation.
Hence, sulfur atom will form a cation on loosing electrons.
Fission of uranium-235 products energy and ______
A. isotopes of smaller elements
B. isotopes of larger elements C. lighter isotopes of uranium D. heavier isotopes of uranium
Answer:
A
Explanation:
During fission, heavier unstable atoms are split into lighter and more stable atoms with the release of energy. Fission of Uranium-235 produces Barium and Krypton (which are lighter and more stable atoms) and neutrons. Barium has an atomic mass of 141 while that of Krypton is 92.
Answer:
a
Explanation:
Can someone help me with 1 to 8 ? I will mark you Brainliest.
Answer:
1. scientist
2. society
3. We can communicate to people across the world in a fraction of a second, our grandparents would've had to pay an extra fee to call anyone outside of the country. We've also made progress in medicine, making diseases like cancer more treatable.
4. Passion, determination, and intelligence.
5. You could ask yourself what factors do the other trees have that the unhealthy tree not have and then create an experiment as to how the variable missing from the unhealthy tree affects plants.
6. Life science was affected by each of these branches.
7. Investigations take a long time because of observations, forming hypothesis, creating an experiment and analyzing the data and then revizing the experiment and the hypothesis. This can take years and cannot be limited to one year.
8. The contributions of these scientists are absolutely still valuable, without these contributions many of the things we know in the modern world wouldn't be known today. Such as the types of organelles and their functions, the periodic table, and the importance of oxygen for human beings.
Explanation:
select all that apply.. which of these elements from the d-block have electron configurations that don't fit the expected pattern? ruthenium,technetium,good,silver
Answer:
These are the ten elements other than chromium and copper in the d-block don’t fit the expected configuration pattern:
niobium (Nb)
molybdenum (Mo)
ruthenium (Ru)
rhodium (Rh)
palladium (Pd)
silver (Ag)
platinum (Pt)
gold (Au)
darmstadtium (Ds)
roentgenium (Rg)
Explanation:
Answer:
ruthenium (Ru)
gold (Au)
silver (Ag)
Explanation:
Complete the statements based on water’s polarity and ability to form hydrogen bonds. Water’s boiling point is abnormally than expected. Water has a surface tension, allowing adhesion, cohesion, and capillary action. Water has a capacity to retain heat, keeping moderate climates warmer in the winter. Water as it freezes, so ice floats when expected to sink.
answers are higher high high expands
Answer:
1 Higher
2 High
3 High
4 Expands
Explanation:
Answer:
a) Water's boiling point is abnormally higher than expected
b) Water has a high surface tension allowing adhesion, cohesion and capillary action.
c) Water has a high capacity to retain heat, keeping moderate climates warmer in the winter.
d) Water expands as it freezes, so ice floats when expected to sink.
Explanation:
a) Because of its small molecular weight, it's expected that the water has a low boiling point, but the abillity to make hydrogen bonds generates an atraction force between the molecules much more stronger that expected.
This phenomenom implies that the water has higher boiling point than other heavier compounds.
b) The high surface tension its the result of the hydrogen bonds and the polarity of the water molecules, giving the water molecules stronger bonds and like a very strong net, makes it harder to get through.
This is the cause of the listed phenomena: cohesion, adhesion and capillary action.
c) Another effect of the hydrogen bonds of the water is its high thermal capacity.
The hydrogen bonds are the strongest of the molecular bonds (H bonds, dipole-dipole and London) and the stronger the bond is, the higher the amount of energy (in this case heat) it can absorb before its rupture.
This is why water have a high thermal capacity compared with other molecules that only have London or dipole bonds.
d) Water expands when it freezes because the molecules rearrange and during that, many of the hydrogen bonds break.
When that happens, the water molecules have a weaker attraction than before and in consecuence the water (ice) expands.
Also, ice floats beacuse once it expands it has a lower density compared to the water.
Explain why HCl (aq) cannot be used to acidify KMnO4 (aq) while ur can be used to acidify K2Cr2O7 (aq).
Answer:
HCL being a strong electrolyte dissociates in water to give H+ and Cl- ions. KMnO4 being a strong oxidising agent oxidises Chloride ion(Cl-) to Cl2. ... Hence more amount of KMnO4 is usedup which results in error in reading. The situation is completely the opposite with K2Cr2O7.
hope this helps
pls help!!
Explain the resonance structures for the nitrate ion, NO3−.
Answer:
Resonance structures for the nitrate ion exist because there are more than one Lewis Structures for this ion.
Explanation:
How many bonds in each nitrate ion?
To answer this question, start by considering how many electrons each atom need for an octet.
Each N atom needs three electrons to achieve an octet.Each O atom need two electrons to achieve an octet.The three O atoms and one N atom in each nitrate ion will need [tex]3\times 2 + 3 = 9[/tex] electrons in total to be stable. However, the ion carries a charge of [tex]-1[/tex]. In other words, atoms in the ion have already acquired one extra electron. Now they need only [tex]9 - 1 = 8[/tex] electrons.
Atoms share electrons by forming bonds. In effect, each chemical bond (a pair of shared electrons) adds two electrons to the bonding atoms. Atoms in the nitrate ion will form [tex]8/2 = 4[/tex] chemical bonds.
However, there are only three bonding position available. One of the three positions will see a double bond while each of the other two will see a single bond. However, the double bond can be at any of the three bonding position. There are thus three possible Lewis Structures. See the sketched. Note that the three structures are interconvertible by moving only the electrons but not any atoms. Hence the name resonance structures.
Keep in mind that in reality, the pi electrons from the double bond are delocalized across all three possible bonding positions. All three N-O bonds are of equal length.
Absalon adds 1 g of salt to 1 L of room temperature water (25 °C). Then, he starts a timer and observes what happens. He notices that it takes 1 minute for the salt to dissolve. He decides to repeat his experiment, and he adds 1 g of salt to another 1 L of room temperature water (25 °C). After he adds the salt, he starts a timer. But, instead of watching the salt dissolve, he stirs the salt and water with a spoon until it dissolves. He notices that it only takes 30 seconds for the salt to dissolve in his second experiment.
Why does the salt dissolve faster in Absalon's second experiment?
Stirring the salt and water increases the polarity of the water molecules, which causes the ionic bonds of the salt to break.
Stirring the salt and water increases particle motion, which causes more collisions to occur between the water and salt.
Stirring the salt and water increases the surface area of the water, which causes more collisions to occur between the water and salt.
Stirring the salt and water increases the pressure on the solution, which causes the ionic bonds of the salt to break.
Answer:
B
Explanation:
I looked it up and found the answer lol
Answer: Option (b) is the correct answer.
Explanation:
When Absalon stirred the solution which is containing salt in water then there will occur disturbance into solution due to stirring.
As a result, particles will come in motion and hence, they tend to gain more kinetic energy. Due to which there will be more number of collisions between the solute (salt) and solvent (water) particles.
Hence, rate of reaction will increase and because of this salt will readily dissolve into water.
Thus, we can conclude that the salt dissolve faster in Absalon's second experiment because stirring the salt and water increases particle motion, which causes more collisions to occur between the water and salt.
An unknown substance is a white solid at room temperature and has a melting point of 78 °C. Which of the following substances is most likely to be the identity of the unknown sample?
A. Naphthalene, a molecular solid with the formula C10H8
B. Silica, a network solid held together by covalent bonds with the formula SiO2
C. Calcium chloride, an ionic compound with the formula CaCl2
D. Water, an molecular compound with the formula H2O
The unknown solid with melting point of 78 degrees Celsius has been the molecular solid Naphthalene with formula [tex]\rm C_1_0H_8[/tex]. Thus, option A is correct.
Melting point has been defined as the temperature that has been able to transfer the solid to the liquid state.
The melting point has been higher for the substances with strong intermolecular interactions, and lower for weak attractive compounds.
Identity of the unknown sampleThe unknown sample has a melting point of 78 degree Celsius.
The molecular compounds have high melting point with strong intermolecular interactions, and ionic and covalent compounds have low melting point with weak intermolecular interactions.
The melting point of water has been zero degree Celsius.
Thus, the unknown solid with melting point of 78 degrees Celsius has been the molecular solid Naphthalene with formula [tex]\rm C_1_0H_8[/tex].
Thus, option A is correct.
Learn more about melting point, here:
https://brainly.com/question/25777663
The most likely identity of the unknown white solid with a melting point of 78 °C is naphthalene, a molecular solid with the formula C10H8, commonly used in mothballs.
Explanation:If the unknown substance is a white solid at room temperature and has a melting point of 78 °C, the most likely candidate from the given options would be naphthalene, which is a molecular solid. This substance has the formula C10H8 and is well-known for its use in mothballs. It has a melting point close to the given temperature, whereas the other given substances have significantly higher melting points and different chemical and physical properties.
SiO2, or silica, is a covalent network solid and CaCl2, or calcium chloride, is an ionic compound. Both have melting points that are much higher than 78 °C. Meanwhile, H2O, water, is a molecular compound that is not a solid at room temperature, as it has a melting point of 0 °C. Therefore, option A, naphthalene, is the most likely identity of the unknown solid.
what does the capital letter, such as T, represent in a punnett square
Answer: A dominant gene.
Explanation:
Answer:
The dominant form of a gene
Explanation:
The capital letter, such as T, represents the dominant form of a gene in a punnett square.
The following chemical equation is not balanced.
Ca + AIPO4 — Al + Caz(PO4)2
When the equation is balanced, what is the coefficient for pure aluminum
(AI)?
A) 1
B) 2
C) 4
D 8
Answer:
3Ca + 2AlPO4 = Ca3(PO4)2 + 2Al.
That is B
Answer:
The stoichiometric coefficient of aluminium is 2 that is option B is correct.
Explanation:
Stoichiometric coefficient is the numeral coming or written before the symbol of compound or an element in balanced chemical reaction equation.
[tex]3Ca + 2AIPO_4 \rightarrow 2Al + Ca_3(PO_4)_2[/tex]
According to stoichiometry, 3 moles of calcium reacts with 2 moles of aluminum phosphate to give 2 moles of aluminium and 1 mole of calcium phosphate.
The stoichiometric coefficient of calcium is = 3
The stoichiometric coefficient of aluminum phosphate = 3
The stoichiometric coefficient of aluminium = 2
The stoichiometric coefficient of calcium phosphate = 1
When H+ forms a bond with H2O to form he hulydronium ion H3O+, this bond is called a coordinate covalent bond because ?
Answer:
Because both the bonding electrons come from the oxygen atom.
Explanation:
A coordinate covalent bond is formed when both the bonding electrons are coming from the same atom.
Here in the given situation, when H+ forms a bond with the water molecule [tex] H _ 2 O [/tex] to form the hydronium ion [tex] H _ 3 O + [/tex], then it is referred to as a coordinate covalent bond since both the bonding electrons are coming from the oxygen atom.
Answer:
Both the shared electrons come from single atom
Explanation:
Coordinate covalent bond is a type of bond in which both the shared pair of electrons are come from single bond. Whereas in simple covalent bond, sharing electrons come from both the participant atoms.
Coordinate covalent bond is also called dative bond and the atom which share both the electrons are called donar atom.
For a coordinate covalent atom to from, one participant atom should have lone pair of electron and other atom should be deprived of electrons.
In [tex]H_2O[/tex] molecule, O atom has lone pair of electrons while H+ ions has deficiency of electrons, so O atom shares its lone pair of electrons with H+ ions which results in the formation of coordinate covalent bond and forms [tex]H_3O^+ molecules[/tex].
Identify the Lewis base in this balanced equation: Fe3+ H2O Fe(H2O)63+
Answer:H20
Explanation:
because it is the base that contributes electrons
Answer : The Lewis-base in this reaction is, water [tex]H_2O[/tex]
Explanation :
According to the Lewis acid-base theory,
Lewis acid : It is a substance that can accepts pairs of electrons to form a covalent bond.
Lewis-base : It is a substance that can donates pairs of electrons to form a covalent bond.
The given balanced equation is:
[tex]Fe^{3+}+6H_2O\rightarrow [Fe(H_2O)_6]^{3+}[/tex]
In this reaction, [tex]Fe^{3+}[/tex] ion is Lewis-acid and [tex]H_2O[/tex] is a Lewis-base. The [tex]H_2O[/tex] donates electrons to [tex]Fe^{3+}[/tex] ion to form [tex][Fe(H_2O)_6]^{3+}[/tex].
Hence, the Lewis-base in this reaction is, water [tex]H_2O[/tex]
Elements that form ionic bonds generally have how many valence electrons? ± 1 or ± 2 ± 2 or ± 3 ± 4 ± 5
Answer:
± 1 or ± 2
Explanation:
Electrovalent bonds are chemical bonds that are established on the premise of transferring electrons between two atoms.
In this bond type, a higly electronegative atom, typically a non-metal receives electrons from an atom with lesser electronegativity, a metal.
To know the number of electrons involved in forming electrovalent bonds, we typically look at the groups of atoms that combines to form the bond.
Metals are found in group I and II on the periodic table. Metals are electropositive and are good electron donors. These metals have 1 and 2 electrons in their valence shell respectively. In like manners, the more electronegative atoms are found in group VI and VII. The elements in these groups are non-metals with high electronegativity and requires just 1 and 2 electrons to complete their octet.
Answer:
± 1 or ± 2
Explanation:
Mercury-203 undergoes beta minus decay. 203 80 Hg → 203 81 Tl + ? The subatomic particle produced is a(n) . 203 80 Hg → 203 81 Tl + 0 -1 e Is this the correct balanced equation? .
Answer:
A negative beta particle
Yes
Explanation:
The incomplete equation of the reaction:
²⁰³₈₀Hg → ²⁰³₈₁Tl + ?
In order to balance nuclear equations, we must conserve the mass number and atomic number.
For the mass number; 203 = 203 + a
a = 0
Atomic number; 80 = 81 + b
b = -1
The unknown has no mass number but an atomic number of -1
This a negative beta particle and it is designated as ⁰₋₁e
Answer:
1) Electron
2) Yes
What is a scientific theory?
A. A scientist's guess about how something works
B. The results of an experiment obtained using the scientific method
c. A proven fact that will never change
D. An idea that is backed by data from many sources
The scientific theory is "an idea that is backed by data from many sources".
What is scientific theory?A scientific theory would be a justification for a feature of the natural world as well as the universe that already has undergone repeated testing and confirmation through using established procedures for observation and measurement but also outcome from evaluation.
What is source?The source would be defined as the origin of somebody else.
Therefore, the scientific theory is "an idea that is backed by data from many sources".
To know more about scientific theory and sources
https://brainly.com/question/2375277
#SPJ2
The first step of the water cycle is that water _______________ into the air.
Answer:
evaporates
Explanation:
the heat from the sun causes it to evaporate
What do weather and climate have in common?
A. Both affect average ocean temperatures
B. Both are averages measured over a long period of time
C. Both apply to a certain region
D. Both change day to day
Answer:
Both apply to a certain region
Choice C is correct
Explanation:
Weather refers to the atmospheric conditions of a given place over a short period of time, like a day.
On the other hand, Climate refers to the average climatic conditions of a particular region measured over a long period of time.
Both weather and climate apply to a certain region.
A potassium ion can combine with several monatomic and polyatomic ions to form compounds.
An example of a potassium compound containing both ionic and covalent bonds is ___, and an example containing only ionic bonds is ___
(plato pre:chemical bonding )
Final answer:
Potassium nitrate (KNO3) contains both ionic and covalent bonds within the compound, while potassium sulfate (K2SO4) is an example of a compound containing only ionic bonds.
Explanation:
An example of a potassium compound containing both ionic and covalent bonds is potassium nitrate (KNO3), and an example containing only ionic bonds is potassium sulfate (K2SO4).
Potassium nitrate is composed of potassium ions (K+) and nitrate ions (NO3−), with the nitrate being a polyatomic ion held together by covalent bonds between nitrogen and oxygen atoms. This compound demonstrates ionic bonding between potassium and nitrate ions, as well as covalent bonding within the nitrate ion itself.
On the other hand, potassium sulfate is made up of potassium ions (K+) and sulfate ions (SO42−). This compound is purely ionic, with the bonds forming from the electrostatic attraction between the positively charged potassium ions and the negatively charged sulfate ions.
As a temperature of a fixed volume of a gas increases, the
pressure will what?
As a temperature of a fixed volume of a gas increases, the
pressure will also “INCREASE”
what is the [OH-] in a solution with a poh of 3.90
Answer: The hydroxide ion concentration is [tex]1.26\times 10^{-4}M[/tex]
Explanation:
pOH is defined as the negative logarithm of hydroxide ion concentration in the solution.
To calculate the pOH of the reaction, we use the equation:
[tex]pOH=-\log[OH^-][/tex]
where,
[tex]pOH=3.90[/tex]
Putting values in above equation, we get:
[tex]3.90=-\log[OH^-][/tex]
[tex][OH^-]=1.26\times 10^{-4}M[/tex]
Hence, the hydroxide ion concentration is [tex]1.26\times 10^{-4}M[/tex]
Answer: 1.26 x 10 -4
Explanation:
Given pH = 6.75,
Is this acidic, basic or neutral?
How do you know?
Answer:
Acidic.
Explanation:
pH is a logarithmic function of [H+]:
pH = −log[H+]
pH is usually (but not always) between 0 and 14. Knowing the dependence of pH on [H+], we can summarize as follows:
If pH < 7, then the solution is acidic.
If pH = 7, then the solution is neutral.
If pH > 7, then the solution is basic.
Given pH is 6.75 so it is acidic.
A group of students working in a high school chemistry lab believe they have discovered a new element! How exciting? Upon further testing by scientists (with better equipment), it is found that the new element contains 74 protons and 110 neutrons.
What is the atomic number?
What is the mass number?
Is this a new element? Explain.
Give the name and symbol for this element.
Is it solid, liquid, or gas? Explain
Answer:
Explanation:
Information given about the element:
Number of protons = 74
Number of neutrons = 110
For the atomic number:
Neutral atoms such as this one would have their atomic number to be the same with their number of electrons and protons:
atomic number = number of protons = number of electrons
The atomic number would therefore be 74
For the mass number:
The mass of an atom is centrally concentrated within the tiny nucleus. The mass number is the sum of protons and neutrons in an atom. Protons and neutrons are nuclear particles and are called nucleons:
Mass number = number of protons + number of neutrons = 74+110=184
Is this a new element?
From the peroidic table, tungsten(W) perfectly fits this description of the atom. It has an atomic number of 74 and a mass number of approximately 184. The element is not a new element.
Is it solid, liquid, or gas?
The element is a hard metallic solid. It is a classified as a transition metal on the periodic table. Transition metals have very unique metals and are mostly solids.
Answer:
1) The atomic number of this element is 74, because number of protons = atomic number
2) Mass number of this element is 184
Ar=Z+N=74+110=184
3) It isn't a new element. An element with such atomic and mass numbers exists
4) It is Wolfram. Symbol: W
5) Solid
Sorry if I made mistakes. I started learning English recently