Alcohol is a ______ drug that affects your coordination, judgment, perception, and emotional state.

Answer: An increase in the ratio of insulin to glucagon will increase the activity of --

- Acetyl-CoA carboxylase(+)

-Phosphofructokinase PFK2(+)

-Glycogen synthase(+)

- Hormone sensitive lipase (-). The hormone sensitive lipase activity is not increased with increased insulin activity.

Explanation: increased insulin - glucagon ratio is usually high in fed state.Insulin helps the cells absorb glucose, reducing blood sugar and providing the cells with glucose for energy. When blood sugar levels are too low, the pancreas releases glucagon. Glucagon instructs the liver to release stored glucose, which causes blood sugar to rise.

Answer:

See explanation below

Explanation:

In the old nomenclature,.the periodic table is classified like this:

IA, IIA, IB, and such.

New nomenclature only name it like the number of columns the periodic table has, like group 1, 2, 3, 4 and so....

Now using the old nomenclature, the groups with the "A" are:

Group 1: group IA

Group 2: IIA

Group 13 - 18: IIIA - VIIIA

These last groups are the non metal elements.

Now according to this, the relation is pretty easy to explain. Any element of group IA, IIA or IIIA when they lose electrons for any reason, they will always form cations, in other words, positive charges, and the number of these charges is equal to their group number, for example, if you take Sodium (Na) which is in group IA, and lose electrons, it's ion is Na+1 (the plus 1, is equal to the number of it's group). Same thing happen with an element of group IIA like Calcium, when it loses electrons, it becomes Ca+2.

On the other hand, any element of group IVA through VIIIA, which are the non metals, the charge of it's respective ion, is always determined substracting 8 from the group where they are. For example, if we take Carbon, which is in group IVA (Group 14), if we substract 8 from 4, we'll have -4, so it's charge would be -4.

In the case of Fluorine (Group VIIA), if we substract 8 from 7, we have -1, so the charge of fluorine is -1.

This is the relation between the charges of group A metals and non metals ions.

Final answer:

The charges of Group A metals and nonmetals correlate with their group number in the periodic table because elements in the same group have the same number of valence electrons, determining their ion charges.

Explanation:

The charges of Group A metal and nonmetal ions are related to their positions in the periodic table due to the consistent number of valence electrons in each group. For instance, all alkali metals in the first column have a +1 charge when they form ions, because they each have one valence electron they tend to lose. Similarly, alkaline earth metals in the second group have a +2 charge due to their two valence electrons. On the other side of the table, the halogens in the next-to-last column form ions with a -1 charge because they have seven valence electrons and need only one more to achieve a full octet. This pattern continues with elements moving closer to the noble gases gaining a larger negative charge equivalent to the number of groups they are located to the left of the noble gases. It's important to note that this trend is less predictive for transition metals, which can exhibit variable charges not directly predictable from their location on the periodic table.

Answer:

A. 630mL

Explanation:

The combined gas law says:

P₁V₁/T₁ = P₂V₂/T₂

Where P₁ is 2,4 atm; V₁ is 250mL; T₁ is 15+273,15 = 288,15K; P₂ is 1,0 atm; V₂ is the final volume; T₂ is 27°C; 27+273,15 = 300,15K.

Thus:

2,4atm×250mL/288,15K = 1,0atm×V₂/300,15K

V₂ = 625mL ≈ A. 630mL

I hope it helps!

Answer:

[tex]\large \boxed{\text{A. 620mL}}[/tex]

Explanation:

We can use the Combined Gas Laws to solve this problem

Data

p₁ = 2.4 atm;  p₂ = 1.0 atm

V₁ = 250 mL; V₂ = ?

T₁ = 15°C;       T₂ = 27 °C

Calculations

(a) Convert the temperatures to kelvins

T₁ = (15 + 273.15) K = 288.15 K

T₂ = (27 + 273.15) K = 300.15 K

(b) Calculate the new volume

[tex]\begin{array}{rcl}\dfrac{p_{1}V_{1} }{T_{1}} & = & \dfrac{p_{2}V_{2}}{T_{2}}\\\\\dfrac{\text{2.4 atm $\times$ 250 mL}}{\text{288.15 K}} & = & \dfrac{\text{1.0 atm} \times V_{2}}{\text{300.15 K}}\\\\\text{2.08 mL} & = & \dfrac{V_{2}}{300.15}\\\\V_{2} & = & \textbf{620 mL}\\\end{array}\\\text{The volume of the bubble when it reaches the surface is $\large \boxed{\textbf{620 mL}}$}[/tex]

Answer:

With the appropriate security measures nuclear power, as well as other energy sources, can be used safely.

Explanation:

Nuclear energy, as well as other energy sources, can be dangerous if we do not take the appropriate prevention and protection measures. Nuclear power has one of the lowest levels of fatalities per unit of energy generated, as well as low levels of air pollution-related deaths and allows the reduction of carbon dioxide emissions compared to other energy sources. Since its commercialization, in the 70s, the number of nuclear power accidents is very low compared to the number of accidents of other energy sources, having that coal mining is the most dangerous energy activity in history.

I think that without the correct security considerations, all the energy sources can be dangerous, but if we take security measures as using protection barriers, controlling the reactivity of nuclear power plant, making regularly quality and prevention test control, as well as other measures, we can have the benefits of the nuclear power without worrying too much for danger.      

Therefore, with the appropriate security measures nuclear power, as well as other energy activities, can be used safely.  

I hope it helps you!

Answer: Any of these can be used: sulphur, sulphate, fumarate or nitrate

Explanation:

Final answer:

In anaerobic respiration, various oxidized compounds like nitrate, ferric iron, sulfate, carbonate, and fumarate can act as final electron acceptors.

Explanation:

The compounds that can serve as final electron acceptors in anaerobic respiration include various oxidized inorganic and organic molecules. Notable ones are nitrate, ferric iron, sulfate, and carbonate. Certain organic compounds such as fumarate can also act as electron acceptors.

Anaerobic cellular respiration enables all the organisms to generate energy in environments lacking oxygen. The amount of ATP produced through this process is less than in aerobic respiration since oxygen is the most efficient electron acceptor. The final electron acceptor used influences the total ATP yield.

Answer:

There reacts 7.35 grams of H2O

Explanation:

Step 1: Data given

Mass of aluminium hydroxide = 10.6 grams

Step 2: The balanced equation

Al2S3(s) + 6H2O(l) → 2Al(OH)3(s) + 3H2S(g)

Step 3: Calculate number of moles Al(OH)3

Moles Al(OH)3 = mass Al(OH)3 / molar mass Al(OH)3

Moles Al(OH)3 = 10.6 grams / 78.00 g/mol

Moles Al(OH)3 = 0.136 moles

Step 4: Calculate moles of H2O

For 1 mol of Al2S3 we need 6 moles of H2O to produce 2 moles of Al(OH)3 and 3 moles of H2S

For 0.136 moles of Al(OH)3 we need 3*0.136 = 0.408 moles of H2O

Step 5: Calculate mass of H2O

Mass H2O = moles H2O * molar mass of H2O

Mass H2O = 0.408 * 18.02 = 7.35 grams

There reacts 7.35 grams of H2O

Answer:

e. all of these

Explanation:

Let us check all the given options one by one:

a.The nucleus is positively charged.

Yes it is correct since nucleus contain protons and neutrons and protons are positively charged.

b.The nucleus contains both charged and uncharged particles.

Yes because protons are positively charged and neutrons are neutral in nature.

c.The electrons contribute very little to the total mass of the atom.

Yes we know all the mass of the atom is considered in center and mass of electron is negligible as compared to protons and neutrons.

d.The electrons are located in the atomic space outside the nucleus.

Yes, its a known fact.

e. All of these.

Since , all given options are correct .

Therefore , option e. is right .

Explanation:

Ionic crystals

1. They are formed by electrostatic attraction between the cation and anion.

2. Naturally solid and brittle in nature.

3.Generally good conductors of electricity in moltane state and  have high melting and boiling points.

Example: NH4Cl is an inonic compound with NH4^+ being cation and Cl- being anion.

Molecular Solid

1. These are formed by sharing of electrons pair between the atoms. A shared pair of e- is  called a covalent bond.

2. Usually not a good conductor of electricity even in melted state.

3. They mostly liquids and gases only a few are solids.

examples , CO, CO2 , H2CO3 , etc.

Molecular crystals consist of molecules held by weak intermolecular forces, leading to low melting points and poor conductivity, as seen in dry ice. Ionic crystals are composed of ions arranged in a lattice, held by strong ionic bonds, contributing to high melting points and electrical conductivity when molten, as exemplified by table salt.

The differences between molecular and ionic crystals are based on their atomic and molecular arrangements, the types of bonds between them, and their physical properties. Molecular crystals are composed of molecules held together by weak intermolecular forces, such as dispersion forces, dipole-dipole forces, and hydrogen bonds. These forces are much weaker than the ionic or covalent bonds found in other types of crystals. As a result, molecular crystals generally have low melting and boiling points and are poor conductors of electricity. An example of a molecular crystal is dry ice (solid carbon dioxide).

In contrast, ionic crystals consist of a lattice of alternating positive and negative ions, held together by strong electrostatic forces known as ionic bonds. These crystals often have high melting and boiling points and typically conduct electricity when melted or dissolved in water. A common example of an ionic crystal is table salt (sodium chloride).

Answer:

14.7 lbs

Explanation:

Air pressure is the weight of the air above us. It is approximately 14.7 pounds or lbs per square inch at sea level. It means that an air column weights 14.7 lbs, 1 square inch in diameter, reaching all the way up to the top of the atmosphere.

Answer:

1.03

I hope it helps you ;)

Answer:

D. Temperature

Explanation:

Viscosity can be defined as the measure of a fluid's resistance to flow by determing the fluid strain rate produced by a given applied shear stress. Viscosity occurs in liquid by the advent of cohesive forces between the molecules of liquid and also in collision between molecules of gas.

In a Viscosity lab, Temperature change affects the test of viscosity. This is because an increase in temperature leads to increase in rates of  molecules  interchanging, thus molecules moves faster with higher temperatures.

The aftermath effect of temperature on viscous liquid is to reduce the cohesive force while simultaneously increasing the rate of molecular interchange.  Also,according to the kinetic theory of gases, viscosity is  proportional to the square root of the absolute temperature.practically, it increases more rapidly.

Answer:

D. Temperature

Explanation:

Viscosity is defined as the resistance of molecular layers to adjacent layers in a fluid. It is also defined as the resistance to overall flow of the fluid.

The viscosity of fluids, depends upon the temperature. It increases with decrease in temperature, due to increase in inter-molecular forces and hence, the resistive force, as well. And for the same reason viscosity decrease with increase in temperature.

Thus, we change Temperature to test viscosity, in viscosity lab.

Answer: Mass of H2 liberated = 0.039g;

Mass of NaH that reacted = 0.468g

Note: This is the complete question (Binary compounds of alkali metals and hydrogen react with water to liberate H2(g). The H2 from the reaction of a sample of NaH with an excess of water fills a volume of 0.510 L above the water. The temperature of the gas is 35 ∘C and the total pressure is 755mmHg . Find the mass of H2 liberated and the mass of NaH that reacted.)

Explanation:

The equation of the reaction is NaH + H2O ---> NaOH + H2O

molar mass of NaH = 24g, molar mass of H2 = 2g

First, The volume, V1, of the gas produced at standard conditions (s.t.p.) is determined using the general gas equation; P1V1/T1 = P2V2/T2

Making V1 subject of the formula; V1 = P2V2T1/P1T2

P1 = 760mHg, P2 = 755mmHg, V1 = ?, V2 = 0.5L, T1 = 0∘C  = 273K, T2 = 35 ∘C = 308K

V1 = 755*0.5*273/(760*308) = 0.44L

1 mole or 22.4L of H2 has a mass of 2g;

mass of 0.44L of H2 = 2*0.44/22.4 = 0.039g

From the equation of the reaction, 2g of H2 is produced by 24g of NaH at s.t. p.

0.039g of H2 will be produced by 0.039*24/2 = 0.468g of NaH

Answer:

The depth of the lake is 67.164 meters.

Explanation:

The combined gas equation is,

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

where,

[tex]P_1[/tex] = initial pressure of gas in bubble= ?

[tex]P_2[/tex] = final pressure of gas = 0.980 atm

[tex]V_1[/tex] = initial volume of gas = [tex]V[/tex]

[tex]V_2[/tex] = final volume of gas = 8.00 × V

[tex]T_1[/tex] = initial temperature of gas = [tex]4.55^oC=273.15+4.55=277.7 K[/tex]

[tex]T_2[/tex] = final temperature of gas = [tex]18.05^oC=273.15+18.05=291.2 K[/tex]

Now put all the given values in the above equation, we get:

[tex]\frac{P_1\times V}{277.7 K}=\frac{0.980 atm\times 8.00\times V}{291.2 K}[/tex]

[tex]P_1=7.476 atm[/tex]

pressure of the gas in bubble initially is equal to the sum of final pressure and pressure exerted by water at depth h.

[tex]P_1=P_2+h\rho\times g[/tex]

Where :

[tex]\rho =[/tex] density of water = [tex]1.00 g /cm^3=1000 g/m^3[/tex]

g = acceleration due gravity = [tex]9.8 m/s^2[/tex]

[tex]7.476 atm=0.980 atm +h\rho\times g[/tex]

[tex]6.496 atm=h\rho\times g[/tex]

[tex]6.496 \times 101325 Pa=h\1000 g/m^3\times 9.8 m/s^2[/tex]

h = 67.164 m

The depth of the lake is 67.164 meters.

Explanation:

An Element is one and a compound is more than 2elements

Answer:

The difference between an element and a compound is that an element is a substance made of same type of atoms, whereas a compound is made of different elements in definite proportions. Examples of elements include iron, copper, hydrogen and oxygen. Examples of compounds include water (H2O) and salt (Sodium Chloride - NaCl)

Explanation:

Further Differences:

Defintion:

Compound - A compound contains atoms of different elements chemically combined together in a fixed ratio.

Element - An element is a pure chemical substance made of same type of atom.

Representation:

Compound - A compound is represented using its chemical formula that represents the symbols of its constituent elements and the number of atoms of each element in one molecule of the compound.

Element - An element is represented using symbols.

Composition:

Compound - Compounds contain different elements in a fixed ratio arranged in a defined manner through chemical bonds. They contain only one type of molecule. Elements that compose the compound are chemically combined.

Element - Elements contain only one type of atom. Each atom has the same atomic number i.e., the same number of protons in their nucleus.

Answer:

Depends on the conditions of reaction.

Explanation:

Any element or compound that enters into a chemical reaction can undergoes any process depending of the conditions of reaction, for example, temperature, pressure, medium, among others.

A chemical reaction is a process in which any substance, element or process undergoes chemical and physical changes.

In chemical reaction we have reactants, that is the innitial or starting elements or compounds; products which are the result of the reaction between the reactants and we might see physical changes.

For example, if we do a reaction betwenn Iron and oxygen:

4Fe + 3O2 --------> 2Fe2O3

Iron and oxygen reacts and creates a new product. This is the iron oxyde, which is a physical change too, and you can see that for a color change.

Depending on conditions, we can have several types of chemical reaction, such as synthesis, decomposition, single displacement, double displacement, equilibrium reactions, acid - base reactions among others.

In a chemical reaction, a reactant undergoes a process where it is converted into a product. The sequence of these steps is called the reaction mechanism. The reaction's rate is determined by the rate of the slowest step in the mechanism.

An element or compound that enters into a chemical reaction undergoes a process wherein it is converted into a different substance. This element or compound is called the reactant, and the new substance formed is called the product.

Chemical reactions occur when two or more atoms bond together to form molecules or when bonded atoms are broken apart. The sequence of individual steps by which reactants are converted into products during the course of a reaction is called the reaction mechanism.

The overall rate of a reaction is determined by the rate of the slowest step in its mechanism, called the rate-determining step. Chemical reactions can release or absorb heat, called exothermic and endothermic processes respectively.

https://brainly.com/question/34137415

#SPJ11

Answer:

The mass percent of aluminum sulfate in the sample is 16.18%.

Explanation:

Mass of the sample = 1.45 g

[tex]Al_2SO_3+6NaOH\rightarrow 2Al(OH)_3+3Na_2SO_4[/tex]

Mass of the precipitate = 0.107 g

Moles of aluminum hydroxide = [tex]\frac{0.107 g}{78 g/mol}=0.001372 mol[/tex]

According to reaction, 2 moles of aluminum hydroxide is obtained from 1 mole of aluminum sulfate .

Then 0.001372 moles of aluminum hydroxide will be obtained from:

[tex]\frac{1}{2}\times 0.001372 mol=0.000686 mol[/tex]

Mass of 0.000686 moles of aluminum sulfate :

= 0.000686 mol × 342 g/mol = 0.2346 g

The mass percent of aluminum sulfate in the sample:

[tex]=\frac{ 0.2346 g}{1.45g}\times 100=16.18\%[/tex]

The mass percent of Al2(SO4)3 in the sample is approximately 16.14%. This was determined by calculating the number of moles of Al(OH)3 in the precipitate, inferring the number of moles of Al2(SO4)3 in the original sample, and then calculating the mass percent using these values.

To calculate the mass percent of Al2(SO4)3 in the sample, the first step is to calculate the molar mass of Al(OH)3 and Al2(SO4)3. The molar mass of Al(OH)3 is approximately 78 g/mol and that of Al2(SO4)3 is about 342 g/mol. Now, let's calculate the number of moles of Al(OH)3 in the precipitate using the formula: moles = mass of substance/molar mass. this results in 0.107 g/78 g/mol = 0.00137 mol.

In the chemical reaction of Al2(SO4)3 with NaOH, each mole of Al2(SO4)3 produces 2 moles of Al(OH)3. Thus, the number of moles of Al2(SO4)3 in the original sample is 0.00137 mol/2 = 0.000685 mol. Now, convert this mole value into mass using the equation: mass of substance = moles * molar mass. this results in 0.000685 mol * 342 g/mol = 0.234 g.

Finally, calculate the mass percent of Al2(SO4)3 in the original sample using the formula: mass percent = (mass of component / total mass)*100%. This results in: (0.234 g / 1.45 g) * 100% = 16.14%. Therefore, the mass percent of Al2(SO4)3 in the sample is approximately 16.14%.

https://brainly.com/question/34428429

#SPJ3

Answer:

Ar atoms in argon gas

Explanation:

Final answer:

Electrostatic forces, including ionic bonds and the strong nuclear force, hold oppositely charged ions, DNA structures, and atomic nuclei together. These forces are central to the integrity and structure of many physical and biological entities.

Explanation:

The electrostatic force is responsible for holding together various types of structures and compounds in physics and chemistry. For example, an ionic bond is an electrostatic attraction that holds ions together in an ionic compound, such as the ion pairs found in salts like sodium chloride (NaCl). The strength of this bond is contingent on the magnitude of the charges and the distance between the ions. For instance, a cation with a 2+ charge will form a stronger ionic bond compared to a cation with a 1+ charge because the electrostatic force increases with larger charges.

Moreover, classical electrostatics plays a crucial role in molecular biology, particularly in the structure of large charged molecules like proteins and DNA. In the case of DNA, which is highly charged, the electrostatic force not only holds the molecule together but also imparts structural integrity and strength to the double helix.

Lastly, within the atomic nucleus, while electrostatic forces cause repulsion between positively charged protons, the strong nuclear force overpowers this repulsion and holds the protons and neutrons together, preventing the nucleus from disintegrating under electrostatic repulsion.

Answer: The percent yield of the reaction is 18.7 %

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Given mass of hydrazine = 3.95 g

Molar mass of hydrazine = 32 g/mol

Putting values in above equation, we get:

[tex]\text{Moles of hydrazine}=\frac{3.95g}{32g/mol}=0.123mol[/tex]

The given chemical equation follows:

[tex]N_2H_4(aq.)+O_2(g)\rightarrow N_2(g)+2H_2O(l)[/tex]

By Stoichiometry of the reaction:

1 mole of hydrazine produces 1 mole of nitrogen gas

So, 0.123 moles of hydrazine will produce = [tex]\frac{1}{1}\times 0.123=0.123mol[/tex] of nitrogen gas

To calculate the moles of nitrogen gas gas, we use the equation given by ideal gas, which follows:

[tex]PV=nRT[/tex]

where,

P = pressure of the nitrogen gas = 1.00 atm

V = Volume of the nitrogen gas = 0.550 L

T = Temperature of the nitrogen gas = 295 K

R = Gas constant = [tex]0.0821\text{ L. atm }mol^{-1}K^{-1}[/tex]

n = number of moles of the nitrogen gas = ?

Putting values in above equation, we get:

[tex]1.00atm\times 0.555L=n_{N_2}\times 0.0821\text{ L atm }mol^{-1}K^{-1}\times 295K\\\\n_{N_2}=\frac{1.00\times 0.555}{0.0821\times 295}=0.023mol[/tex]

To calculate the percentage yield of nitrogen gas, we use the equation:

[tex]\%\text{ yield}=\frac{\text{Experimental yield}}{\text{Theoretical yield}}\times 100[/tex]

Experimental yield of nitrogen gas = 0.023 moles

Theoretical yield of nitrogen gas = 0.123 moles

Putting values in above equation, we get:

[tex]\%\text{ yield of nitrogen gas}=\frac{0.023}{0.123}\times 100\\\\\% \text{yield of nitrogen gas}=18.7\%[/tex]

Hence, the percent yield of the reaction is 18.7 %

Answer:

The percent yield of the reaction is 18.45 %

Explanation:

The reaction is:

N₂H₄(aq) + O₂(g) →  N₂(g) + 2H₂O(l)

Ratio between hydrazine and N₂ is 1:1, so 1 mol of hydrazine produces 1 mol of N₂

The molar mass of hydrazine is 32  g/m

The moles we used are : mass / molar mass hydrazine

3.95 g / 32 g/m = 0.123 moles

So, in the 100 % yield reaction, we will produce 0.123 of gas.

Let's apply the Ideal Gases law to find out, the moles of gas that have been produced.

0.550L . 1 atm = n . 0.082 . 295K

(0.550L .1atm) / 0.082 . 295K = n

0.0227 mol = n

So, to find out the percent yield of the reaction we finally make a rule of three

0.123 moles ___ 100 %

0.0227 moles ____ 18.45 %

Answer:

336.0 g

Explanation:

The definition of concentration by percentage in mass per volume can be expressed as:

% m/v = mass Sucrose (in g) / Volume of Solution (in mL) * 100

The problem gives us the concentration and the volume, so we solve for grams of sucrose:

2.4 L ⇒ 2.4 * 1000 = 2400 mL

14 % = mass Sucrose / 2400 mL * 100

mass Sucrose = 336.0 g

Answer:

Correct answer - B

Explanation:

Radioactive decay is the process of in which an unstable atomic nucleus loses energy by emitting ionize particles and radiation transforming the parent nuclide atom into a different atom called daughter nuclide.

Nuclear equation that show the atomic number and mass number of every particle which are involved in the radioactive decay.

The given  nuclear reaction is as follows.

[tex]^{11}_{6}C\rightarrow ^{11}_{5}B+^{0}_{1}e[/tex]

Therefore,Correct answer - B

Answer:

The correct option is d, bactericidal

Explanation:

Antimicrobial agent that kill bacteria are called bactericidal and hence, prevents the growth of bacteria.

Antimicrobial agent that slows the growth of the bacteria called bacteriostatic.

Bactericidal and bacteriostatic are types of antibiotics.

Bactericidal antibiotics act by inhibiting cell wall synthesis. Penicillin, cephalosporins, vanomycin, etc are some of bactericidal antibiotics.

Answer:

B. Two chlorine atoms

Explanation:

This electronic configuration shows that the given atom is magnesium.

Electronic configuration of magnesium:

Mg¹² = 1s² 2s² 2p⁶ 3s²

There are two valance electrons of magnesium that's why it would react with two atoms of chlorine. Chlorine is present in seventeen group. It has seven valance electrons. It required just one electron to get complete octet. While magnesium needed to lose two electrons to get complete octet. That's why two chlorine atoms bonded with one magnesium atom. Thus both would get complete octet.

Mg + Cl₂  →   MgCl₂

Carbohydrate loading, otherwise known as carb loading is the process of adjusting one's nutrition to maximize the amount of carbohydrate (in form of glycogen) stored in the body. It is a strategy that is usually utilized by athletes to increase endurance during competition and by healthcare professionals when prepping patients for some specific surgeries.

A typical carb loading regime requires increased intake of high-carb diets and temporary reduction in physical activities although this might not be the case at the initial stage depending on the type of carb loading. The different types that exist include;

The ultimate aim of carb-loading regime is to make more fuel (in the form of glycogen) available during exercises or athletic events.

The correct option is to maximize glycogen storage in the body.

Carbohydrate loading is a strategy used to maximize glycogen storage in muscles and liver, primarily used by endurance athletes to enhance performance. It doesn't oxidize lactic acid, reduce lactate accumulation, or maximize creatine phosphate storage.

Carbohydrate loading is a strategy used by endurance athletes, such as marathon runners, to maximize the storage of glycogen in the muscles and liver. Glycogen is the main way the body stores glucose for later use. Its primary role is to provide energy for muscles during physical activity. Carbohydrate loading occurs when athletes increase the amount of carbohydrates in their diet and decrease exercise in the days leading up to an event. This process helps to maximize the body's energy reserves during endurance events to improve performance.

It's important to note that it doesn't oxidize lactic acid, reduce lactate accumulation or maximize creatine phosphate storage. These are related to different processes in the body. Oxidizing lactic acid and reducing lactate accumulation are associated with lactate threshold and aerobic/anaerobic metabolism, while maximizing creatine phosphate storage relates to the body's short-term anaerobic energy system.

https://brainly.com/question/33556453

#SPJ6

Answer:The last time levels of atmospheric carbon dioxide were this high came during the Pliocene Epoch, which extended from about 5.3 million to 2.6 million years ago

The amount of nutrients present in the tropic level is called the living state.

The accurate answer is very complicated as the amount of carbon dioxide is changes gradually every day. Therefore the exact date to the same ratio of carbon dioxide is difficult to tell.

In my opinion, the amount of carbon dioxide is high as it if for today is 20 years ago when ozone later starts depleting.

Hence, the correct answer is 20 years ago.

For more information, refer to the link:-

https://brainly.com/question/19524691

Answer: option C) Na, Mg, K

Explanation:

Similar chemical properties are expressed by elements found in the same or close groups. There are Seven (7) groups in the Periodic table.

Of all the options, ONLY sodium Na, Magnesium Mg, and Potassium K, are located in closely together with SODIUM and MAGNESIUM being in the Same period, while SODIUM and POTASSIUM are placed in the same Group 1.

Therefore, Na, My, and K are most similar in chemical properties

Answer:

O,S,Se

Explanation:

Answer:

The order of this half-life reaction is zero. This is a zero order reaction.

Explanation:

Step 1: Data given

At the pressure P0,1 of 55.5 kPa, the half-life is 340 s

At the pressure P0,2 of 28.9 kPa, the half-life is 178 s

Step 2: Calculate the order

(n-1) = ((log (t1/2P0,1 / t1/2P0,2)) / (log (P0,2 /P0,1)))

⇒ with t1/2P0,1 = the half-life at a pressure of 55.5 kPa = 340 s

⇒ with t1/2P0,2 = the half-life at a pressure of 28.9 kPa = 178 s

⇒ with P0,1 = the pressure of 55.5 kPa

⇒ with P0,2 = the pressure of 28.9 kPa

(n-1) = (log (340/178)) /  log( 28.9/55.5)

(n-1) = log (1.91) / log(0.52)

(n-1) = 0.281 / -0.284

n-1 = -1

n = 0

The order of this half-life reaction is zero. This is a zero order reaction.

Answer:

(3) 0.70 g

Explanation:

Half life of iron-53 = 8.5167 minutes

[tex]t_{1/2}=\frac {ln\ 2}{k}[/tex]

Where, k is rate constant

So,  

[tex]k=\frac {ln\ 2}{t_{1/2}}[/tex]

[tex]k=\frac{ln\ 2}{8.5167}\ min^{-1}[/tex]

The rate constant, k = 0.08138 min⁻¹

Time = 25.53 minutes

Using integrated rate law for first order kinetics as:

[tex][A_t]=[A_0]e^{-kt}[/tex]

Where,  

[tex][A_t][/tex] is the concentration at time t

[tex][A_0][/tex] is the initial concentration  = 5.60 g

So,  

[tex]\frac{[A_t]}{5.60}=e^{-0.08138\times 25.53}[/tex]

[tex][A_t]=\frac{5.6}{e^{2.0776314}}[/tex]

[tex][A_t]=0.70\ g[/tex]

Answer- (3) 0.70 g

Answer:

After 25.53 minutes there will remain 0.70 grams of the iron-53 sample. Option 3 is correct.

Explanation:

Step 1: Data given

Original mass of the original iron sample = 5.60 grams

Half life of iron-53 = 8.5167 minutes

Step 2: Calculate the rate constant

k = (ln 2)/(t1/2)

⇒ with k = the rate constant

⇒ with t1/2 = the half-life time = 8.5167 minutes

k = 0.08139 / min

Step 3: Calculate the mass after 25.53 minutes

At = A0*e^(-kt)

⇒ with At = the amount of iron sample after 25.53 minutes

⇒ A0 = the initial amount of iron sample =5.50 grams

⇒ with k =  0.08139 / min

⇒ with t = the time = 25.53 minutes

At = 5.50*e^(-0.08139*25.53)

At = 0.70 grams

After 25.53 minutes there will remain 0.70 grams of the iron-53 sample

Answer:

- Bucket liner: a second layer of protection in the hazardous waste containers; they should be sealed with a knot.

- Hazardous bucket label: identifies facility and waste information and must be placed on used hazardous waste containers.

- Zip-tie tags: these are used to close and label bucket liners.

- Chemical bags: plastic bags used to store hazardous waste. They have a zip-type closure and should only store one hazardous waste item.

- Hazardous waste management chart: a job aid which displays how to determine a spill category and how to store hazardous waste until it is picked up.

Explanation:

Hello,

Hazardous waste is a type of waste that could be harmful for the health or the environment . Such waste could exhibit the following threats: ignitability , reactivity , corrosivity  and toxicity

Hazardous wastes may be found in gaseous, liquid or solid forms. They can not be disposed of by typical methods like other by-products of our daily life. Based on the physical state of the waste, treatment and solidification processes might be required.

For the given options on the attached picture, each items match as follows:

- Bucket liner: a second layer of protection in the hazardous waste containers; they should be sealed with a knot.

- Hazardous bucket label: identifies facility and waste information and must be placed on used hazardous waste containers.

- Zip-tie tags: these are used to close and label bucket liners.

- Chemical bags: plastic bags used to store hazardous waste. They have a zip-type closure and should only store one hazardous waste item.

- Hazardous waste management chart: a job aid which displays how to determine a spill category and how to store hazardous waste until it is picked up.

Best regards.

Answer:

NaNO₃ > C₆H₁₂O₆ > C₁₂H₂₂O₁₁

Explanation:

Boiling-point elevation is defined as the phenomenon where boiling point of a liquid will be higher when another compound is added, meaning that a solution has a higher boiling point than a pure solvent. The formula is:

ΔT = k×m×i

Where k is ebulloscopic constant of the solvent, m is molality of solution in moles of solute per kg of solution and i is Van't Hoff factor (1 in glucose and sucrose and 2 in sodium nitrate).

Molality is proportional to moles of solute. As the solutions have the same concentration in mass, the lowest molar mass of solute, the highest boiling point elevation.

Molar mass of glucose is 180,2 g/mol; sucrose 342,3 g/mol and sodium nitrate 85 g/mol.

As sodium nitrate has the lowest molar mass and a Van't Hoff factor of 2, its solution will have the highest boiling point, then will be glucose (In order to its molar mass), and the lowest boiling point will be sucrose. Thus, in order of decreasing boiling point:

NaNO₃ > C₆H₁₂O₆ > C₁₂H₂₂O₁₁

I hope it helps!

The aqueous solutions arranged in order of decreasing boiling point are: sodium nitrate (NaNO3), sucrose (C12H22O11), glucose (C6H12O6).

 The boiling point of a solution is affected by the presence of solute particles, which leads to boiling point elevation. This phenomenon is known as colligative property, which depends on the number of particles in the solution rather than the nature of the particles. The more particles dissolved in a solvent, the greater the boiling point elevation.

 For ionic compounds like sodium nitrate (NaNO3), when dissolved in water, they dissociate into their constituent ions. Sodium nitrate dissociates into two ions, Na^+ and NO3^-. Therefore, for a 10% by mass solution of sodium nitrate, there will be more particles in the solution compared to non-electrolytes like glucose and sucrose, which do not dissociate into ions in solution.

 Glucose (C6H12O6) and sucrose (C12H22O11) are both non-electrolytes and will not dissociate into ions when dissolved in water. However, sucrose has a larger molar mass compared to glucose. Since the solutions are 10% by mass, this means that there will be fewer sucrose molecules per unit mass compared to glucose molecules. Consequently, the solution with sucrose will have fewer particles than the solution with glucose.

 Therefore, the solution with sodium nitrate will have the highest boiling point due to the greatest number of particles, followed by the sucrose solution, and finally, the glucose solution will have the lowest boiling point due to the least number of particles.

 In summary, the order of decreasing boiling point is:

 1. Sodium nitrate (NaNO3) solution

 2. Sucrose (C12H22O11) solution

 3. Glucose (C6H12O6) solution"

Answer:

1067 g

Explanation:

The equilibrium occurs when the velocity of the formation of the products is equal to the velocity of the formation of the reactants in a reversible reaction. The equilibrium constant, Kc, is calculated for a generic reaction:

aA + bB ⇄ cC + dD

[tex]Kc = \frac{[C]^c*[D]^d}{[A]^a*[B]*b}[/tex]

Those concentrations are a simplification of the activity of the compounds. Solids and water have activity equal to 1, so they're not placed in the equation. For the reaction given, let's do an equilibrium chart, knowing that the concentration is the number of moles divided by the volume:

[S₂]initial = 15.5/8.30 = 1.8675 M

S₂(g) + C(s) ⇄ CS₂(g)

1.8675                0            Initial

-x                       +x           Reacts (stechiometry is 1:1)

1.8675 - x            x           Equilibrium

Thus

Kc = x/(1.8675-x)

9.40 = x/(1.8675-x)

x = 17.5545 - 9.40x

10.40x = 17.5545

x = 1.6879 M

Then, the number of moles of CS₂ formed is the concentration multiplied by the volume:

n = 1.6879*8.30

n = 14.01 mol

The molar mass of it is 76.14 g/mol, and the mass is the molar mass multiplied by the number of moles:

m = 76.14*14.01

m = 1067 g

Answer:

8 electrons, 8 neutrons and 8 protons

Explanation:

In chemistry, atomic number can be described as the number of protons in an atom. This number is unique to every element present in the periodic table. The atomic number of the element, Oxygen (O), is 8.

An atom of oxygen will have 8 protons in the nucleus, 8 neutrons present in the nucleus as well as 8 electrons which will orbit around the nucleus. The first shell will have 2 electrons whereas the second shell will have 6 electrons.