Write the ratio in lowest terms: 4415 feet to 22245 feet
since they both end with 5 divide each number by 5
4415 = 883
22245/5 = 4449
there is no number that can go into 883 evenly
so the lowest term
would be 883/4449
The correct ratio in lowest terms is [tex]\(\frac{883}{4449}\)[/tex].
To find the ratio in lowest terms, we first write the ratio of the two given lengths:
[tex]\[ \frac{4415 \text{ feet}}{22245 \text{ feet}} \][/tex]
Next, we divide both the numerator and the denominator by their greatest common divisor (GCD) to simplify the ratio. The GCD of 4415 and 22245 can be found by using the Euclidean algorithm or by inspection.
We can start by dividing both numbers by 5:
[tex]\[ \frac{4415 \div 5}{22245 \div 5} = \frac{883}{4449} \][/tex]
Now, we check if 883 and 4449 have any common divisors other than 1. Since 883 is a prime number and does not divide evenly into 4449, we have found the simplest form of the ratio.
Thus, the ratio of 4415 feet to 22245 feet in lowest terms is [tex]\(\frac{883}{4449}\)[/tex].
A "Local" train leaves a station and runs at an average rate of 35 mph. An hour and a half later an "Express" train leaves the station and travels at an average rate of 56 mph on a parallel track. How many hours after the Express train starts will the it overtake the Local?
Answer:
2.5 hrs.
Hope this helps <3
how to solve 46.2 x 10 with a negative 2 exponent
How to subtract a negative fraction from a positive fraction?
If runners in a long distance race were to run straight from the starting line to the finish line they would run 13 kilometers. However, the road they run makes them travel longer than that. They must run 5 kilometers south and then head west "x" kilometers for the remainder of the race. How far do the runners travel?
5^2 +x^2 = 13^2
25 + x^2 = 169
x^2 = 144
x = sqrt(144) = 12
they run west for 12 KM
12+5 = 17 total km
Help!!!!! Identify KPN
Answer:
it is 70
Step-by-step explanation:
I guessed and got it right, lol
Part 1: what are the conditions for using the standard deviation formula when conducting a significance test? be specific about p versus p-hat. part 2: what are the conditions for approximating with a normal distribution?'
To use the standard deviation formula in a significance test, the sample must be random and the population standard deviation should typically be unknown, while approximation with a normal distribution requires a sufficiently large sample size and the success-failure condition for proportions. Choosing the correct distribution depends on whether the standard deviation is known and the sample size.
Explanation:Conditions for Using the Standard Deviation Formula and Approximating with a Normal Distribution
For conducting a significance test using the standard deviation formula, certain conditions must be met:
The sample must be randomly selected.If surveying a proportion, we use \( \hat{p} \) for samples and \( p \) for populations.If calculating a sample standard deviation, the population standard deviation should be unknown.The sample size should be sufficiently large if the population distribution is not normal (usually n > 30).To approximate the sample distribution with a normal distribution, particularly when conducting hypothesis testing:
The sample size must be large enough (typically n > 30).The sample should be randomly selected and should represent the population.For proportions, the sample should meet the success-failure condition where \( np \geq 10 \) and \( n(1-p) \geq 10 \).The conditions for a hypothesis test often include:
Stating the null and alternative hypotheses.Deciding on a significance level (e.g., \( \alpha = 0.05 \)).Knowing whether population parameters are known, which determines the choice of test statistic.Finding the p-value and comparing it with the significance level to make a decision.Examples of Hypothesis Testing with Different Conditions
If you know the population standard deviation, you might use the z-distribution for hypothesis testing.If the population standard deviation is unknown but the sample size is large, the t-distribution might be the appropriate choice.The F-statistic is used when comparing two variances, such as two standard deviations of test scores.I don't know the answer can someone pls help me
line QP =
11.5*(11.5 +24) = 11.5 * 35.5 = 408.25
SqRT(408.25) = 20.205
round answer to 20 units
Points A and B lie on a circle centered at point O. If OA = 5 and length of ABowncircumference=14, what is the area of sector AOB? Use the value π = 3.14, and choose the closest answer.
This question can simply be answered directly. To solve this, we should recall that the formula of a circle is:
Area of circle = π r^2 where r is the radius of the circle
Now we are given that segment OA is equivalent to 5 units. Segment OA is also the diameter of that circle therefore d = 5.
Now let us convert the formula knowing that radius is one half the diameter:
r = d / 2
Area of circle = π (d / 2)^2
Area of circle = π d^2 / 4
Substituting:
Area of circle = π (5)^2 / 4
Area of circle = 3.14 * 25 / 4
Area of circle = 19.625 = 19.6 square units
Answer:
The answer would be 19.6 for plato Users
Step-by-step explanation:
P(A)=25,P(B|A)=920,P(A∩B)=?
We use the product rule in probability to find P(A∩B) = P(B|A) * P(A). Substituting given values, P(A∩B) = (9/20) * 25, which equals 11.25.
Explanation:The subject area of this question is probability, a topic within mathematics. Here, we are asked to find the intersection of Events A and B given the probabilities of A and the conditional probability of B given A. The rule of product in probability states that P(A∩B) = P(B|A) * P(A).
Let's calculate: P(B|A) is given as 9/20 while P(A) is 25. Thus,
P(A∩B) = P(B|A) * P(A) = (9/20) * 25 = 11.25
Learn more about Probability here:https://brainly.com/question/32117953
#SPJ12
determine the value of x in the diagram where lines a and b are parallel
25°
15°
75°
55°
Please help !
(cos Θ − cos Θ)^2 + (cos Θ + cos Θ)^2
Answer: The required simplified form is [tex]4\cos^2\theta.[/tex]
Step-by-step explanation: We are given to simplify the following trigonometric expression :
[tex]T=(\cos \theta-\cos\theta)^2+(\cos \theta+\cos \theta)^2.[/tex]
To simplify, first we need to evaluate the terms within the brackets.
The simplification is as follows :
[tex]T\\\\=(\cos \theta-\cos\theta)^2+(\cos \theta+\cos \theta)^2\\\\=0^2+(2\cos\theta)^2\\\\=0+4\cos^2\theta\\\\=4\cos^2\theta.[/tex]
Thus, the required simplified form is [tex]4\cos^2\theta.[/tex]
Factor each expression 1)4a^2-16ab^3+8ab^2c 2) n^2+8n+15 3) g^2-9g+20 4) z^2-7z-30 5) 4y^3-36y
Tobius is going to climb a ladder to reach and fix a piece of siding located 30 feet above the ground on the building. If he places the ladder at a 60° angle with the ground, about how long is the ladder?
The height of the ladder will be;
⇒ 20√3 feet
What is mean by Triangle?A triangle is a three sided polygon, which has three vertices and three angles which has the sum 180 degrees.
Given that;
Tobius is going to climb a ladder to reach and fix a piece of siding located 30 feet above the ground on the building.
And, He places the ladder at a 60° angle with the ground.
Now,
Let the height of the ladder = h
So, We can formulate;
⇒ sin 60° = 30/h
⇒ √3/2 = 30/h
⇒ h = 30 × 2/√3
⇒ h = 20√3
Thus, The height of the ladder = 20√3 feet
Learn more about the triangle visit:
https://brainly.com/question/17335144
#SPJ3
What is the following product?
Aiko stands 5 m from a tree. At that distance, the angle of elevation from the ground to the top of the tree is 80°. Approximately how tall is the tree?
if <6 = <10 and <5 = <7, which describes all the lines that must be parallel?
The lengths of three sides of a quadrilateral are shown below: Side 1: 1y2 + 3y − 6 Side 2: 4y − 7 + 2y2 Side 3: 3y2 − 8 + 5y The perimeter of the quadrilateral is 8y3 − 2y2 + 4y − 26. Part A: What is the total length of sides 1, 2, and 3 of the quadrilateral? (4 points) Part B: What is the length of the fourth side of the quadrilateral? (4 points) Part C: Do the answers for Part A and Part B show that the polynomials are closed under addition and subtraction? Justify your answer.
Answer:
Part A: 12y^2+9y-21
Part B: 4y^2+6y^2+7y-5
Part C: A set of numbers is closed, or has closure, under a given operation if the result of the operation on any two numbers in the set is also in the set. For example, the set of real numbers is closed under addition, because adding any two real numbers results in another real number. Likewise, the real numbers are closed under subtraction, multiplication and division (by a nonzero real number), because performing these operations on two real numbers always yields another real number. Polynomials are closed under the same operations as integers.
Step-by-step explanation:
Hope this helps!!
Someone please help me out!
try it with a couple different numbers
try 4: 1^2 +2^2 +3^2 +4^2 = 1 +4 +9 +16 =30
formula: 4(4+1)(2*4+1)/6 = 4*5*9 = 180/6=30
this one works
now try 5
1^2 + 2^2+3^2+4^2+5^2 = 55
formula: 5(5+1)(2*5+1)/6 = 5*6*11 = 330/6=55
I tried a larger number ( 14) as well and it worked
so you can say that this is true
Factor the following.
20 POINTS PLUS BRAINLIEST!!!
Which function is represented in the table of values?
x 0 -1 -2 -3
y 2 4 8 16
A.
y=2^x
B.
y=2(1/2)
C.
y=-2^x
D.
y=(1/2)^x
The scale of a map is 1 1/4 inches = 100 miles. On that map, 2 cities are 4 1/8 inches short. What is the actual distance between the cities?
need to divide 4 1/8 by 1 1/4
4 1/8 = 33/8
1 1/4 = 5/4
33/8 / 5/4 = 33/8 * 4/5 = 132/40 reduces to 33/10 = 3 3/10
100* 3 3/10 = 330 miles
Final answer:
Using the map scale of 1 1/4 inches equals 100 miles, and the measured map distance of 4 1/8 inches, the actual distance between the two cities is calculated to be 330 miles.
Explanation:
To find the actual distance between two cities on a map, we can set up a proportion based on the scale of the map. In this case, the scale is 1 1/4 inches = 100 miles. The measured distance on the map between the two cities is 4 1/8 inches.
We'll convert these measurements to an easier-to-calculate form by changing the mixed numbers to improper fractions.
First, we convert 1 1/4 inches to an improper fraction: 1 1/4 = 5/4 inches. Likewise, we convert 4 1/8 inches to an improper fraction: 4 1/8 = 33/8 inches. Now we set up the proportion using the scale.
(5/4 inches) / (100 miles) = (33/8 inches) / (x miles)
To solve for x, cross-multiply and divide:
(5/4) * x = (33/8) * 100
x = (33/8 * 100) / (5/4)
x = (33 * 100 * 4) / (8 * 5)
x = (33 * 4) / (2)
x = 66 miles
Therefore, the actual distance between the two cities is 330 miles.
Find two consecutive positive integers such that thw sqaure of the first decreased by 25 equa;s three times the second
The question is "Find the number of elements in the following sets"
I sort of get it but it docks me points every time I get it wrong so I don't want to risk it
If 3a2 – 5ab – 2b2 is factored, one of the factors might be:
A scatter plot is made with the data shown.
Time (hr)
1
2
3
4
5
6
7
8
9
Distance from Destination (mi)
320
280
240
200
160
120
80
40
0
What type of association will the scatter plot for this data represent between the time, in hours, and the distance from the destination, in miles?
No association
Negative linear association
Positive nonlinear association
Positive linear association
This is a negative linear association because when ever the x (top line) is increasing and the y (bottom line) is decreasing, that shows that you are going farther to the end of the x axis and lower down the y axis.
Negative linear association is the type of association will the scatter plot for this data represent between the time, in hours, and the distance from the destination, in miles
What is Graph?Graph is a mathematical representation of a network and it describes the relationship between lines and points.
The scatter plot for this data will represent a negative linear association between the time, in hours, and the distance from the destination, in miles.
As the time in hours increases, the distance from the destination in miles decreases, and this relationship is a straight line that slopes downwards from left to right which indicates a negative linear association.
Therefore, Negative linear association is the type of association will the scatter plot for this data represent between the time, in hours, and the distance from the destination, in miles.
To learn more on Graph click:
https://brainly.com/question/17267403
#SPJ3
PLZ HEEEEEEEELPPPPPPPP!!!!!!!!!
Celia is staring at the clock waiting for school to end so that she can go to track practice. She notices that the 4-inch-long minute hand is rotating around the clock and marking off time like degrees on a unit circle. Part 1: How many radians does the minute hand move from 1:25 to 1:50? (Hint: Find the number of degrees per minute first.) Part 2: How far does the tip of the minute hand travel during that time?
there are 60 minutes marks on a clock
360/60 = 6
6 degree between every minute
From 1:25 to 1:50 there are 25 minutes
25 x 6 = for a total of 150 degrees
150*pi/180 = 5pi/6 radians. ( 2.61799 radians)
Total distance the tip of minute hand has traveled in this time = 2pi*(4 in) * (5pi/6)/(2pi) = 10pi/3 inches (10.47 inches)
If the perimeter of the adult pinball machine is 172 inches, what is the length, in inches of ? Type the numeric answer only in the box below.
help. Find mBAC in circle O. (The figure is not drawn to scale.)
A. 170
B. 95
C. 47.5
D. 42.5
Answer: The answer is (C) 47.5.
Step-by-step explanation: In the given figure, O is the centre of a circle, where AC is the diameter and OB is the radius. We are to find the measure of ∠BAC.
We have
[tex]m\angle AOB+m\angle BOC=180^\circ\\\\\Rightarrow m\angle BOC=180^\circ-85^\circ\\\\\Rightarrow m\angle BOC =95^\circ.[/tex]
∠BOC and ∠BAC are angles at the centre and at the circumference subtended by the arc BC, so
[tex]m\angle BAC=\dfrac{1}{2}\times m\angle BOC=\dfrac{1}{2}\times 95^\circ=47.5^\circ.[/tex]
Thus, (C) is the correct option.