Answer:
Force=35 N
Explanation:
Given data
mass m=10.0 kg
Gravitational field E=3.50 N/kg
To find
Force
Solution
From definition of gravitational field intensity.
[tex]E_{gravitational-field }=\frac{Force}{mass}\\ E=F/m\\F=mE\\F=(10.0 kg)*(3.50 N/kg)\\F=35N[/tex]
The express train can travel 100 miles per hour. This information describes the train's
Answer
acceleration.
direction.
speed.
velocity.
...?
Answer:
Speed
Explanation:
The information "100 miles per hour" describes that the train travels 100 miles of distance in a time period of 1 hour. we know that the speed is defined as the distance traveled by an object in unit interval of time with no information about the direction of motion. hence the information "100 miles per hour" about the express train describes the speed of the train.
What type of pollution did the Clean Water Act succeed in limiting?
sewage is the answer because it's what the water was filled with most
For the cart without a washer,how does the potential energy at the top of the ramp compare to the kinetic energy at the bottom of the ramp?
A protostar forms when a ________ collapses under the force of gravity.
A. white dwarf
B. black dwarf
C. nebula
D. supernova ...?
Answer:
C .Nebula
Explanation:
Protostar is an early stage in the formation of a star. Main sequence star is formed after the protostar heats up to almost 10 million kelvin temperature.
The interstellar medium fills the entire space, which appears to be seemingly empty. It is comprised of gas and dust. Hydrogen is the most abundant element in this medium, which is spread across and fills the space.
Under the influence of gravity, pressure and temperature, these clouds of gas and dust come together forming nebula. Hydrogen and helium in this nebula, under high temperature conditions form protostars.
when light waves passes straight through an object, it is called?
Transmission
Explanation;Light waves are types of waves that are electromagnetic waves, meaning they do not require material medium for transmission. Light is transmitted as a transverse wave such that the vibration of particles is perpendicular to the direction of wave motion.A material medium enables the transmission of a wave by the vibration of particles, atoms or molecules. The vibration of particles in a medium helps in the transmission of a wave such that energy is transferred from one point to another due to the disturbance caused by the wave.a fisherman hooks a trout and reels in his line at speed of 4 inches/second. assume tip of fishing rod is 12 ft above the water directly above the fisherman and the fish is pulled horizontally directly towards the fisherman. Find the horizontal speed of the fish when it is 20 ft from the fisherman. ...?
Answer:
v = 4.66 inch/s
Explanation:
As we know that the height of the rod and the distance from the fisherman is related to each other as
[tex]x^2 + y^2 = L^2[/tex]
now differentiate it with respect to time
[tex]2x\frac{dx}{dt} + 0 = 2L\frac{dL}{dt}[/tex]
here we know that
[tex]\frac{dL}{dt} = 4 inch/s[/tex]
now when
x = 20 ft and y = 12 ft then the length of the line is given as
[tex]L^2 = 12^2 + 20^2[/tex]
[tex]L = 23.3 ft[/tex]
now from above relation
[tex]\frac{dx}{dt} = \frac{L}{x}(\frac{dL}{dt})[/tex]
now we have
[tex]v_x = \frac{23.3}{20} (4 inch/s)[/tex]
[tex]v_x = 4.66 inch/s[/tex]
2 Resistors of resistance, R = (100 +- 3) Ohm, R2 = (200+-4)Ohm are connected in Parallel and Series.
Find the absolute error and % error in the measurement of equivalent resistance are in each combinations I.e Series and Parallel.. ??
The absolute error and % error in the measurement of equivalent resistance are :
Series → 7 Ohm and 2%Parallel → 5 Ohm and 7%Further explanationElectrical circuits can generally be divided into two types , i.e :
1. Series CircuitIn series circuit, the electric current flowing on each resistor is always the same as the total current.
To find the total resistances you can use the following formula:
[tex]\large {\boxed {R_s = R_1 + R_2 + R_3 + ...} }[/tex]
2. Parallel CircuitIn parallel circuits, the electrical voltage at each resistor is always the same as the source voltage.
To find the total resistances you can use the following formula:
[tex]\large {\boxed {\frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} + ...} }[/tex]
Let's tackle the problem now !
Given:
[tex]R_1 = 100 \pm 3 ~ Ohm[/tex]
[tex]R_2 = 200 \pm 4 ~ Ohm[/tex]
Unknown:
Absolute Error = ?
% Error = ?
Solution:
In Series Circuit :[tex]R_s = R_1 + R_2[/tex]
[tex]R_s = ( 100 \pm 3 ) + ( 200 \pm 4 )[/tex]
[tex]\large {\boxed {R_s = 300 \pm 7 ~ Ohm} }[/tex]
Absolute Error = 7 Ohm% Error = (7/300) x 100% ≈ 2%In Parallel Circuit :[tex]\frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2}[/tex]
[tex]\frac{1}{R_p} = \frac{R_2}{R_1 ~ R_2} + \frac{R_1}{R_2 ~ R_1}[/tex]
[tex]\frac{1}{R_p} = \frac{R_1 + R_2}{R_1 ~ R_2}[/tex]
[tex]R_p = \frac{R_1 ~ R_2}{R_1 + R_2}[/tex]
[tex]R_p = \frac{100 \times 200}{100 + 200}[/tex]
[tex]R_p = \frac{20000}{300}[/tex]
[tex]R_p = \frac{200}{3} ~ Ohm[/tex]
[tex]R_p \approx 67 ~ Ohm[/tex]
To find the % Error , we will use this following formula :
[tex]\frac{\Delta R_p}{R_p} = \frac{\Delta R_1}{R_1} + \frac{\Delta R_2}{R_2} + \frac{\Delta (R_1 +R_2)}{R_1 + R_2}[/tex]
[tex]\frac{\Delta R_p}{R_p} = \frac{3}{100} + \frac{4}{200} + \frac{7}{300}[/tex]
[tex]\frac{\Delta R_p}{R_p} = \frac{11}{150}[/tex]
[tex]\frac{\Delta R_p}{R_p} = \frac{11}{150} \times 100{\%}[/tex]
[tex]\frac{\Delta R_p}{R_p} \approx 7{\%}[/tex]
[tex]Absolute ~ Error = \Delta R_p[/tex]
[tex]Absolute ~ Error = \frac{11}{150} \times \frac{200}{3}[/tex]
[tex]Absolute ~ Error = \frac{44}{9}[/tex]
[tex]Absolute ~ Error \approx 5 ~ Ohm[/tex]
[tex]\large {\boxed {R_p = 67 \pm 5 ~ Ohm} }[/tex]
Learn moreThe three resistors : https://brainly.com/question/9503202A series circuit : https://brainly.com/question/1518810Compare and contrast a series and parallel circuit : https://brainly.com/question/539204Answer detailsGrade: High School
Subject: Physics
Chapter: Current of Electricity
Keywords: Series , Parallel , Measurement , Absolute , Error , Combination , Resistor , Resistance , Ohm
A layer of material that helps block the transfer of heat between the air inside and outside a building is called
a. an active solar system.
b. a solar cell.
c. a heat exchanger.
d. insulation.
A metal sphere with a mass of 80.0g rolls along frictionless surface at 20.0m/s and strikes a stationary sphere having a mass of 200.0g. The First sphere stops completely. At what speed does the second sphere move away from the point of impact
...?
Answer:
8.0 m/s
Explanation:
By the law of conservation of momentum, the total momentum before the collision must be equal to the total momentum after the collision:
[tex]p_i=p_f[/tex]
The total momentum before the collision is given only by the momentum of the first sphere, since the second sphere is stationary (so its speed is zero and its momentum is zero as well):
[tex]p_i = m_1 u_1 =(80.0 g)(20.0 m/s)=1600 g m/s[/tex]
The total momentum after the collision is given only by the momentum of the second sphere, since the first sphere completely stops, so:
[tex]p_f = m_2 v_2[/tex]
Using conservation of momentum, we find
[tex]p_i=m_2 v_2\\1600 g m/s = (200.0 g) v_2 \\v_2 = \frac{1600 g m/s}{200.0 g}=8.0 m/s[/tex]
The second sphere moves away with a speed of 8 m/s after the collision, derived using the principle of conservation of momentum
To determine the speed of the second sphere after the collision, we need to use the principle of conservation of momentum. According to this principle, the total momentum before the collision is equal to the total momentum after the collision.
Given:
Mass of the first sphere (m1) = 80.0 g = 0.080 kgVelocity of the first sphere before collision (v1) = 20.0 m/sMass of the second sphere (m2) = 200.0 g = 0.200 kgVelocity of the second sphere before collision (v2) = 0 m/sAfter the collision, the first sphere stops completely. Therefore, its final velocity (v'1) is 0 m/s.
The total momentum before the collision:
pinitial = m1 * v1 + m2 * v2 pinitial = 0.080 kg * 20.0 m/s + 0.200 kg * 0 m/s pinitial = 1.6 kg·m/sAfter the collision, let the velocity of the second sphere be v'2.
The total momentum after the collision:
pfinal = m1 * v'1 + m2 * v'2 pfinal = 0.080 kg * 0 m/s + 0.200 kg * v'2 pfinal = 0.200 kg * v'2Since momentum is conserved, pinitial = pfinal:
1.6 kg·m/s = 0.200 kg * v'2Solving for v'2:v'2 = 1.6 kg·m/s / 0.200 kg = 8 m/sThus, after the collision, the second sphere moves away with a speed of 8 m/s.
How is the exposure rate generally expressed?
a. in roentgens per hour
b. in gray
c. in radiation absorbed dose
d. in microcurie
Answer:
a. in roentgens per hour
Explanation:
Exposure rate is the ratio of radiation exposure per unit of time. It is often used to measure radiation fields in the environment of a radioactive facility for exposure prevention and control. Exposure rate is generally expressed as per hour roentgens (R / h) used for X-ray or Gamma in air.
The röntgen or roentgen (R) is a unit of exposure to ionizing radiation. The name was given as a tribute to the German physicist Wilhelm Conrad Röntgen (or Roentgen) (1845-1923) who discovered X-rays.
Consider the following geometric solids.
A sphere with a ratio of surface area to volume equal to 0.08 m-1.
A right circular cylinder with a ratio of surface area to volume equal to 2.1 m-1.
What results would you expect if these two models were compared in a diffusion test?
A. The rate of diffusion would be the same for the two models.
B. The rate of diffusion would be faster for the right cylinder.
C. The rate of diffusion would be slower for the right cylinder.
D. The rate of diffusion would be faster for the sphere.
Before answering this question, first we have to understand the effect of ratio of surface area to volume on the rate of diffusion.
The rate of diffusion for a body having larger surface area as compared to the ratio of surface area to volume will be more than a body having less surface area. Mathematically it can written as-
V∝ R [ where v is the rate of diffusion and r is the ratio of surface area to volume]
As per the question,the ratio of surface area to volume for a sphere is given [tex]0.08m^{-1}[/tex]
The surface area to volume ratio for right circular cylinder is given [tex]2.1m^{-1}[/tex]
Hence, it is obvious that the ratio is more for right circular cylinder.As the rate diffusion is directly proportional to the surface area to volume ratio,hence rate of diffusion will be more for right circular cylinder.
Hence the correct option is B. The rate of diffusion would be faster for the right cylinder.
I solid iron ball of mass 770kg is used on a building site. The ball is suspended by a rope from a crane. The distance from the point of suspension to the centre of the mass of the ball is 12 m.The ball is pulled back from the vertical and then realeased, it falls through a vertical height of 1.6m and strikes the wall: What is the speed of the ball just before impact? ...?
The speed of the ball just before impact is calculated using the conservation of energy principle, translating the potential energy into kinetic energy and solving for velocity to obtain 5.60 m/s.
The speed of the ball just before impact on the building site, we can make use of the principle of conservation of energy. Initially, when the ball is held at a height, it possesses potential energy. When released, this potential energy is converted into kinetic energy just before impact. Given the height it falls through, we can calculate its final speed using the equation for potential energy (PE) and kinetic energy (KE):
PE = KE at the point of release and just before impact,
mgh = ½ mv²,
where m is the mass of the ball, g is the acceleration due to gravity (approximately 9.81 m/s²), h is the height, and v is the final speed. After rearranging and solving for v, we get v = √(2gh).
Inserting the values: v = √(2 * 9.81 m/s² * 1.6 m) = √(31.392) = 5.60 m/s. Therefore, the speed of the ball just before impact is approximately 5.60 meters per second.
if the velocity of a car is halved, the centripetal force required to keep it in path of constant radius is (multiplied,divided) by what ...?
Answer:
If the velocity of a car is halved, the centripetal force required to keep it in path of constant radius becomes one fourth of the initial force.
Explanation:
The centripetal force is required to move an object in circular path. Mathematically, the formula of the centripetal force is given by :
[tex]F=\dfrac{mv^2}{r}[/tex]
Here,
m is the mass of the object
v is the velocity of object
r is the radius of the circular path
If the velocity of the car is halved, v'=v/2
New centripetal force is given by :
[tex]F'=\dfrac{mv'^2}{r}[/tex]
[tex]F'=\dfrac{1}{4}\times \dfrac{mv^2}{r}\\\\F'=\dfrac{1}{4}\times F[/tex]
New centripetal force becomes one fourth of the initial force, when the velocity of a car is halved.
Final answer:
When the velocity of a car is halved, the centripetal force required to keep it in a path of constant radius is divided by four.
Explanation:
When the velocity of a car is halved, the centripetal force required to keep it in a path of constant radius is divided by four. This is because the centripetal force is directly proportional to the square of the velocity and inversely proportional to the radius of the circular path.
For example, let's say the original velocity of the car is v and the centripetal force required is F. When the velocity is halved to v/2, the centripetal force becomes (v/2)² = F/4.
Therefore, the centripetal force required to keep a car in a path of constant radius is divided by four when the velocity is halved.
which radiation has a higher frequency than visible light
Answer:
Ultraviolet radiation
Explanation:
Apex
Which of these is the best method to estimate the speed at which a star is moving away from Earth?
measure the star's red shift
calculate the pitch due to changes in frequency of light
calculate the parallax due to changes in Earth's position
measure the star's blue shift ...?
Answer A. Red shift. verified 12/21/18 per test results.
If gas in a sealed container has a pressure of 50 kPa at 300 K, what will the pressure be if the temperature rises to 360 K?
If the gas in a sealed container has a pressure of 50 kPa at 300 K, so the pressure if the temperature rises will be 60 kPa.
What is pressure?The physical force applied to an object is referred to as pressure. A perpendicular force is applied to the surfaces of the objects per unit area. The basic formula for pressure is F/A. (Force per unit area). Pressure is measured in Pascals (Pa).
There are several types pressure of them are Atmospheric Pressure, Gauge pressure, Differential Pressure, and Absolute pressure.
According to the question,
PV=nRT
P/T=nR/V
P/T= constant
Therefore,
(P/T)1=(P/T)2
50/100=P2/360
P2=50×(360/300)
P2= 60 kPa.
Hence, the pressure P2 is 60 kPa.
To get more information about pressure :
https://brainly.com/question/12977546
#SPJ2
How many complete revolutions are needed to draw the angle 725°?
a. 3
b. 1
c. 2
d. 4
Answer:
[tex]725\ degree=2\ revolution[/tex]
Explanation:
We know that 1 complete revolution is equal to 360 degrees. We need to find the number of complete revolution needed to draw the angle of 725 degrees.
Since, 1 revolution = 360 degrees
or
[tex]1\ revolution=2\pi \ radian[/tex]
[tex]1\ degree=\dfrac{1}{360}\ revolution[/tex]
[tex]725\ degree=\dfrac{725}{360}\ revolution[/tex]
[tex]725\ degree=2.01\ revolution[/tex]
or
[tex]725\ degree=2\ revolution[/tex]
So, to draw an angle of 725 degrees, there are 2 revolutions. Hence, this is the required solution.
A 3.5-inch (diameter) floppy disk in a computer rotates with a period of 2.0*10^-1s. If the angular speed is 31.4 rad/s. Whats is the liner speed? ...?
Final answer:
The linear speed of a point on a 3.5-inch floppy disk rotating at 31.4 rad/s is calculated using the formula v = r⋅ω, resulting in a linear speed of 1.396 m/s.
Explanation:
The question is about determining the linear speed of a point on a 3.5-inch floppy disk that rotates with an angular speed. The linear speed v can be calculated using the formula v = r⋅ω, where r is the radius of the disk and ω is the angular speed. Given the diameter of the disk is 3.5 inches, we must first convert it to the radius in meters which is 0.04445 meters (since 1 inch = 0.0254 meters). Therefore, the linear speed is v = 0.04445 m × 31.4 rad/s = 1.396 m/s.
if samples of silver and lead each had volumes to 1 cm^3 which sample would have the greater mass and what would the difference in the mass be
13. Abrasion erodes the desert surface by *
a. Creating blowouts
b. Cutting and polishing exposed rock surfaces
c. Depositing loess across the landscape
d. Creating a stony surface layer
A 200. N wagon is to be pulled up a 30 degree incline at constant speed. How large a force parallel to the incline force is needed? Assume no friction. ...?
Answer:
F = 100 N
Explanation:
Since the wagon is pulled along the inclined plane upwards so here the component of the weight of the wagon will act down the plane.
There is no friction force on the wagon so here in order to move the wagon upwards along the plane we require a force along the plane upwards which must be of same magnitude as that the magnitude of weight along the plane downwards.
now the component of weight along the inclined is given as
[tex]F = Wsin\theta[/tex]
[tex]F = 200 sin30[/tex]
[tex]F = 200(0.5) [/tex]
[tex]F = 100 N[/tex]
To pull a 200 N wagon up a 30-degree incline at constant speed, a parallel force of 100 N is needed. This calculation assumes no friction. It is derived using the component of the gravitational force parallel to the incline.
To determine the force needed to pull a 200 N wagon up a 30-degree incline at a constant speed, we need to analyze the components of the gravitational force acting on the wagon.
The gravitational force acting down the incline is given by: F_parallel = F_gravity * sin(theta)Given that the gravitational force (weight) is 200 N and the incline angle (theta) is 30°, we use the sine function:F_parallel = 200 N * sin(30°)Since sin(30°) = 0.5F_parallel = 200 N * 0.5 = 100 NTherefore, a force of 100 N parallel to the incline is needed to pull the wagon up at a constant speed, assuming no friction.
If the speed of a ball increased from 1m/s to 4m/s, by how much would kinetic energy increase
Select the sentence that best describes why copper and some other metals are good conductors.
A) Copper atoms have loosely held electrons; this means they can freely move in and out of the nucleus of the atom.
B) Copper atoms have a loosely held free electron in their outer shell that is able to move freely to other atoms.
C) Copper and some other metals have highly active inner shells. This means that electrons can be freely exchanged between shells.
D)Copper has a small number of electrons; this means it can easily shed these electrons and take electrons from other atoms.
Answer:
B) Copper atoms have loosely held free electrons in their outer shell that is able to move freely in other atoms.
Explanation:
A material which has loosely held free electrons in its outermost shell is always a good conductor. These loosely held free electrons move from atoms to atoms and cause conductivity. It is known that copper and other metals are good conductors. Therefore, option (B) supports the argument and is a right answer.
Object A attracts object B with a gravitational force of 10 newtons from a given distance. If the distance between the two objects is doubled, what is the changed force of attraction between them?
A. 2.5 newtons
B. 5 newtons
C. 20 newtons
D. 100 newtons
By definition, the gravitational force is given by:
[tex] F = G(\frac{m1m2}{r^2}) [/tex]
Where,
G: gravitational constant
m1: mass of object 1
m2: mass of object 2
r: distance between objects:
We know that the force is equal to 10N:
[tex] G(\frac{m1m2}{r^2}) = 10 [/tex]
If the distance is double we have:
[tex] F = G(\frac{m1m2}{(2r)^2}) = G(\frac{m1m2}{4r^2}) = \frac{1}{4}G(\frac{m1m2}{r^2}) [/tex]
[tex] \frac{1}{4}(10) = 2.5 [/tex]
Therefore, the new force is:
2.5 newtons
Answer:
the changed force of attraction between them is:
A. 2.5 newtons
what phenomenon naturally warms earth's lower atmosphere and surface
Every year, new records in track and field events are recorded. Let's take a historic look back at some exciting races.
In 1989, Carl Lewis established a world record when he ran the 100. meter dash in 9.92 seconds. What was his average speed (in m/s) for the race? Remember to include your data, equation, and work when solving this problem.
Answer: His average speed (in m/s) for the race was 10.08 m/s
Explanation:
Given data
Total distance traveled , D= 100 meter
Total time taken , T= 9.92 seconds
>The average speed([tex]V_{avg}[/tex] ) of an object is the total distance traveled by the object divided by the total time taken to cover that distance .i.e.,
[tex]V_{avg}=\frac{D}{T}=\frac{100}{9.92}\, \frac{m}{s}=10.08\: \frac{m}{s}[/tex]
Thus his average speed (in m/s) for the race was 10.08 m/s
The Chinese Exclusion Act of 1882
1barred employers in U.S. cities from hiring Chinese workers.
2prohibited Chinese laborers from entering the country.
3stripped Chinese Americans of their U.S. citizenship.
4forced Chinese children to attend segregated schools. ...?
Answer: The answer is 2. Prohibited the Chinese laborers from entering the country.
Explanation: The Chinese Exclusion Act of 1882 was a federal law in the United States signed by President Chester. It effectively halted Chinese immigration. I hope your answer is very helpful, please mark me as Brainliest and have a wonderful day! :D
A parachutist with a camera descends in free fall at a speed of 10m/s. The parachutist releases the camera at an altitude of 50m. A) How long does it take the camera to reach the ground? B) What is the velocity of the camera before it hits the ground?
The camera takes approximately 2.02 seconds to reach the ground after being released by the parachutist, and just before hitting the ground, the velocity of the camera is approximately 29.8 m/s.
Explanation:To solve for the time it takes for the camera to reach the ground (A) and the velocity of the camera before it hits the ground (B), we can use the equations of motion under the influence of gravity. Assuming the acceleration due to gravity (g) is 9.8 m/s², and the initial velocity of the camera (u) is 10 m/s (since it's released in free fall by the parachutist moving downward at this speed).
Part A: Time to Reach the Ground
We use the equation: s = ut + 0.5gt², where s is the distance (50m), u is the initial velocity, and t is the time in seconds. Plugging in the values, we get:
50 = 10t + 0.5*9.8*t²
Solving this quadratic equation for t, we find that the time taken for the camera to reach the ground is approximately 2.02 seconds.
Part B: Velocity Before Hitting the Ground
The final velocity (v) can be found using the equation: v = u + gt. Substituting u = 10 m/s, g = 9.8 m/s², and t = 2.02s:
v = 10 + 9.8*2.02 ≈ 29.8 m/s
Therefore, the velocity of the camera just before it hits the ground is approximately 29.8 m/s.
A roast turkey is taken from an oven when its temperature has reached 185°F and is placed on a table in a room where the temperature is 75°F. The graph shows how the temperature of the turkey decreases and eventually approaches room temperature. By measuring the slope of the tangent, estimate the rate of change of the temperature after an hour.
Final answer:
The student's question requires estimating the rate of change of the turkey's temperature after cooling for an hour, which is determined by the slope of the tangent on the temperature graph. This mathematical concept also has a real-life application in ensuring that turkey is cooked to a safe internal temperature of 165°F using a food thermometer.
Explanation:
The student's question involves calculating the rate of change of the turkey's temperature after allowing it to cool for an hour. To accomplish this, one would measure the slope of a tangent line drawn on the graph at the point corresponding to one hour post removal from the oven. The slope of the tangent represents the rate at which the turkey's temperature is changing at that specific time—essentially, how quickly it is approaching room temperature.
While this problem is primarily mathematical, it involves knowledge about cooking temperatures as context. This includes knowing the safe internal temperatures for various meats—a roast turkey should reach a safe minimum internal temperature of 165°F to ensure it is safe to consume. The mathematics involved in graphing and calculating slopes can help in ensuring that these safety standards are followed by providing precise information about how quickly the food is cooling and when it has reached a safe temperature.
When using a food thermometer to check for these safe temperatures, the concepts of rates of change are at work as the thermometer relays how quickly the internal temperature is reaching the desired heat level. This practical application shows the importance of mathematical concepts in everyday life.
The estimated rate of change of the temperature of the turkey after an hour is about -10°F per minute, indicating it is cooling down.
Understanding the Concept of Rate of Change:
The rate of change of temperature is represented by the slope of the tangent line on the graph at a specific time. In this case, after one hour, we can look at the graph to find the corresponding temperature and its change over a small time interval.
Finding the Slope at t = 1 hour:
The slope of the tangent line at a point on a graph is calculated using the formula:
[tex]\text{slope} = \frac{\Delta y}{\Delta x}[/tex]
where [tex]\Delta y[/tex] is the change in temperature and [tex]\Delta x[/tex] is the change in time.
Locate the point on the graph that corresponds to 1 hour after placing the turkey on the table. Let's say the temperature at that point is roughly 150°F (you would need to confirm this from the actual graph).
Let's assume that right before the 1-hour mark (at approximately 59 minutes), the temperature was about 160°F.
Calculate the Change:
Change in temperature:
[tex]\Delta y = y_1 - y_0 = 150 - 160 = -10 \text{ F}[/tex]
Change in time:
[tex]\Delta x = 60 - 59 = 1 \text{ minute}[/tex]
Calculate the Slope:
Now apply the values into the slope formula:
[tex]\text{slope} = \frac{\Delta y}{\Delta x} = \frac{-10 \, \text{F}}{1 \, \text{min}} = -10 \, \text{F/min}[/tex]
Which is not a physical property?
A. Hardness
B. Boiling Point
C. Ability to conduct electricity
D. Ability to combine with oxygen
The correct answer to the question is D). Ability to combine with oxygen.
EXPLANATION:
Before going to answer this question, first we have to understand physical and chemical change.
The change or reaction is said to be physical if there will be no change in the chemical configuration of the substance. The property corresponding to this change is called physical property which won't change the configuration of the substance. It is measurable and simply denotes the physical states of a system.
A chemical change is a change in which a new substance is formed due to the chemical reaction. Here, both the reactants and products have different chemical configuration. The property corresponding to it is called chemical property.
As per our questions, hardness, boiling and ability to conduct electricity are the physical properties of a substance.
The ability to combine with oxygen is not a physical property. It is so because it will result into the formation of a new compound.
Hence, the correct answer to the question is the ability to combine with oxygen.