Hacktivism is defined as an action in which a computer or a network is targeted so that it could be misused in order to achieve a goal against any social or political action.
Hacktivists are the persons who perform hacktivism in order to seek attention on a specific thing or issue they want, from all the people.
In the given scenario, the hacking attack is hactivism as it is done to pull the company down.
Hacktivist can be a single person as well as a group of people working together. However they try to work anonymously so that they could not be traced.
I hope it will help you!"Two technicians are discussing FWD driveshaft service. Technician A says that removal of the driveshaft usually requires partial disassembly of the front suspension. Technician B says that the first step in driveshaft removal is to loosen the front hub nut. Which technician is correct?
Answer:
Technician A only noisy in 1st
Explanation:
Final answer:
Technician B's statement about driveshaft removal is typically correct; the first step is to loosen the front hub nut. For a FWD vehicle, the friction at the front wheels that propels the car is in the direction of motion.
Explanation:
When servicing a front-wheel-drive (FWD) vehicle's driveshaft, the approach varies by make and model, but there are commonalities in the process. Technician A's assertion that driveshaft removal often necessitates partial disassembly of the front suspension may hold true since various suspension components can obstruct the removal of the driveshaft. The statement by Technician B that the first step in driveshaft removal is to loosen the front hub nut is typically correct, as the hub nut secures the driveshaft to the wheel hub and must be loosened while the vehicle's weight is still on the wheels to prevent rotation, prior to lifting the vehicle.
The question you've asked about friction on wheels of a front-wheel driven car is different from the discussion of driveshaft service. For a front-wheel-driven car, the friction at the front wheel is what propels the car forward, so the friction is in the direction of motion (option c). Consequently, the friction at the rear wheel tends to be less since it's mostly rolling resistance and does not provide driving force.
A(n) _____ prevents a mobile device from being used until the user enters the correct passcode.
a. personal ID reader (PIDR)
b. lock screen
c. magnetic carriage
d. swipe card
Answer:
b. lock screen
Explanation:
Lock screen is a security feature provided by many mobile operating systems in mobile devices. This feature prevents unauthorized access to the device. This feature does not allow the mobile to be used unless the user performs a specific action rightly in order to get access of the mobile device. This action can be entering the correct password, pin-code, pattern. These days, the lock screen with new enhanced security features enables the users to unlock the mobile device using gestures like face recognition and also provides fingerprint lock feature that locks and unlocks the mobile device with the fingerprint of that device user. Its a good practice to set the lock screen in a way that it locks the device if it remains idle for specific time and the user is required to enter the password etc to unlock it. Lock screen is a beneficial feature when it comes to the security of the device and the data stored in it.What is output by the following C# code segment?int temp;temp = 180;while ( temp != 80 ) {if ( temp > 90 ) {Console.Write( "This porridge is too hot! " );// cool downtemp = temp – ( temp > 150 ? 100 : 20 ); } // end ifelse {if ( temp < 70 ) {Console.Write( "This porridge is too cold! ");// warm uptemp = temp + (temp < 50 ? 30 : 20);} // end if} // end else} // end whileif ( temp == 80 )Console.WriteLine( "This porridge is just right!" );
Answer:
This porridge is too hot! This porridge is just right!
Explanation:
I am going to explain every line of the given C# code to give explanation of the output.
The first statement int temp declares a variable temp.Then the temp variable is assigned a value 180.The block of statement in while loop body will keep executing until the value in temp variable gets equal to 80. The while loop first checks if the value of temp is not equal to 80. As the value of temp=180 which is not equal to 80, this means that the condition of while loop evaluates to true so the block of code in the body of the loop is reached.There is an if condition inside while loop which checks if the value in temp variable is greater than 90. As value of temp=180 which is greater than 90 so the condition is true. As the condition in the if statement evaluates true so the block of code which is the part of this if statement will be executed:{Console.Write( "This porridge is too hot! " );
temp = temp – ( temp > 150 ? 100 : 20 ); }
The first statement is executed which displays this message: This porridge is too hot! Next temp = temp – ( temp > 150 ? 100 : 20 ); statement will change the value of temp. It has the conditional operator which works as follows:Here, temp>150 is the condition to be evaluated.
If this condition is True then 100 will be returned else 20 will be returned. The value returned is then subtracted from the value of temp and the subtraction result will become the new value of temp. As the value of temp which is 180 is greater than 150 so 100 is returned and is subtracted from the value of temp (180).temp= 180-100
temp=80
So the new value of temp is 80.The else part will not be executed because the condition in if statement was true and also we can see that temp is not less than 70. It means that the porridge is too cold part will not be executed.The while loop while(temp!=80) will again be checked. As the new value of temp is now 80, so the condition gets false which breaks the while loop and program control will leave the body of while loop. After the control comes out of the while loop, there is another if statement. This statement checks if the value of temp variable is equal to 80. It is true as the new value of temp is now 80 after that execution of while loop block of code. As the if condition evaluates to true the statementConsole.WriteLine( "This porridge is just right!" );
will be executed which displays the message:
This porridge is just right.
Hence the output of the given code is:This porridge is too hot! This porridge is just right!
What is wrong with the following code fragment? int *p1, *p2; p1 = new int; p2 = new int; *p1 = 11; *p2 = 0; p2 = p1; cout << *p1 <<" " << *p2 << endl; delete p1; delete p2;
Answer:
Hi Hannahdavy! This is a good question. The problem lies in this part of the program:
p2 = p1;
Explanation:
In C/C++, memory is manually managed. When the variable p1 is assigned to variable p2, the memory allocated for p1 is left unmanaged, causing memory issues. Therefore the program will throw a “double free or corruption (fasttop)” error. What is needed to resolve the issue is to either (a) assign a null value to p1 after p1 has been assigned to p2, or (b) remove the p2 assignment of p1, depending of what the function is actually trying to do in the program.
Which is an example of line-of-sight Internet service?
Cable
DSL
Fiber
WiMax
The answer is WiMAX.
Wimax is a wireless, data communication technology. It means, Worldwide Interoperability for Microwave Access. It is considered as line of sight service provider because it can transmit data between distant devices and using stronger connections. Since it supports stronger signal, it is considered as line of sight provider. It can transfer up to 66GHz amount of frequency or signal rate.
The correct example of line-of-sight Internet service is WiMax. Line-of-sight means the transmitting and receiving points must directly see each other without obstructions.
The correct Option is WiMax. Line-of-sight Internet service refers to a type of connection where the transmitting and receiving antennas must be directly visible to each other with no obstruction in between.
WiMax (Worldwide Interoperability for Microwave Access) is a wireless communication standard designed to provide high-speed Internet access over long distances and typically relies on line-of-sight transmission for optimal performance, especially in rural areas where traditional broadband options like DSL, cable, or fiber-optic may not be available.
What were second generation languages that required detailed knowledge of the computer's hardware and a lot of spare time to write called?
Answer:
Assembly language is also known as second generation language. We can also say it low level language. To implement assembly language on hardware it require a lot of knowledge of computer hardware.
Mostly assembly language is used in Kernel and hardware drives like RAM or ROM these hardware parts belong to second generation. So, assembly language require a lot of knowledge of hardware as well spare time also to write it to get desired output from the hardware.
Assembly language is also used in video editing and video games and require a lot of time.
I hope it will help you!
What must you specify the first time you save a new document? * 10 points a) file name b) file type c) file location d) all of the above must be specified
Answer:
a) file name
Explanation:
If you are saving ur document for the first time, a suggested highlighted file name will display for you to make change for proper safe then you can now change the file location that's if u wish
A switch that is configured to use the Spanning Tree Protocol will place a port in ____________ mode if sending traffic to it may cause a switching loop.
Answer:
Blocking Mode
Explanation:
Spanning Tree Protocol is used to allow path redundancy in the network without creating cycles/circles also called loops.
When two parts of the switched network are connected via two or more Layer 2 switches this result in a loop.
This affects the performance of the network as the result of broadcast packets flooding.
STP puts one port of the switch to forwarding mode and the rest of the ports within the same part of the network to the blocking mode to avoid broadcast packet flooding. STP puts all the ports that are allowing redundant paths to blocking mode and the one port that is left after this is placed in forward mode.
Spanning Tree Algorithm is used by STP to determine the optimal path of switch to the network.
Bridge Protocol Data Units are used to share the information about the optimal path determined by the spanning tree algorithm with other switches.
This information helps STP to eliminate the redundant paths.
So this is how STP allows only one active path to the destination while blocking all other paths to avoid switching loop.
the component in the five component model of information system is considered a bridge that connects the cluster side and the human side.
Answer:
DATA
Explanation: Data can be described as a processed information,it is the bridge that connect the cluster(groups of information or collections of information) side and the human side. though data information can be sent across channels, it gives a meaning to what other models of information system represent. computers are good media in processing information and bringing meanings to the information set into it,computers make the information meaningful for use by the human side.
You recently set up a DHCP server and need to configure your computer to start using it. Click the IPv4 properties option that you would select to use the DHCP server to recieve IP configuration information.
Answer:
Dynamic IP address configuration.
Explanation:
In information technology, there are two ways of configuring IP address on a computer system, namely static and dynamic configuration.
In the computer system, the IP address is configured by selecting the static radio button and typing in the IP address, subnet mask and default IP address. The dynamic IP address configuration requires a selected radio button indicating DHCP configuration and a DHCP server.
The DHCP server holds a range of IP addresses that is used assign IP addresses automatically to a client system.
All of the following are advantages of database-stored information, except ______________. Multiple Choice
1. increased performance
2. increased information
3. redundancy increased
4. flexibility increased
5. information integrity
Answer:
3. Redundancy increase
Explanation:
Database eradicate redundancy of data
The ________ component of the five-component framework of an information system includes individuals who maintain the data and support the networks of computers.
Answer:
The people is the correct answer for the above question.
Explanation:
Any Information system is made up of software, people, hardware, data and processor which is called the framework of the five components. The software is the application which gives instruction and the hardware is used to execute the software. the data is an input for the system and the processor is used to instruct the system to perform the calculation. The people are used to manage all the system. without its help, nothing can be done in the information system. So The people are the most important part of the information system which debugs the problem, maintains the data and maintains the infrastructure.The above question-statement wants to ask about the term which is the part of the five-component framework and it used to maintain the data. The all work described by the question is done by the people. Hence people are the correct answer to the above question.Final answer:
The 'people' component in the five-component framework of information systems refers to data stewards, professional data managers, and IT staff who ensure the smooth operation and integrity of data and network support. They collaborate with developers and play a crucial role in transforming data into valuable information through the use of information systems.
Explanation:
The people component of the five-component framework of an information system includes individuals who maintain the data and support the networks of computers. These individuals are often referred to as data stewards, professional data managers, and IT support staff.
They play a crucial role in ensuring that information systems function correctly by managing data storage, overseeing network security, helping in data integration, and providing support for both the hardware and software components of these systems.
Data stewards and professional data managers are essential in advising, assisting, and supporting all aspects of information management within organizations. They ensure data integrity and accessibility, which is a critical part of transforming data into valuable information.
This transformation is facilitated by information systems like database management systems, which people use to answer questions and make decisions based on analyzed data.
These IT professionals also work alongside hardware and software developers, who create the tools necessary for data management and information creation.
Together they ensure that commercial companies and academic institutions have complex and secure data storage systems that are both reliable and capable of handling the volume of data generated by today's technology-driven environment.
Help fast pls will mark brainliest - What model is best to use for large complex accounting software that can be broken down into many modules?
Waterfall Model
Spiral Model
V Model
RAD Model
A group of interrelated resources acting together according to a plan to accomplish the goals of the records and information management program is called__________.
Answer: Record system
Explanation:
The record system is one of the type of information storage system that stored all the records or data in the form of management system.
We can also retrieve the our data or information by saving it in the system so that we can use that specific data for future use.It also helps in ensuring the data integrity and providing an efficient security to our data or information in the system.According to the given question, record system is one of the information management system that helps in accomplished the goals in the form of record.
Therefore, Record system is the correct answer.
Which Internet of Things (IoT) challenge involves the difficulty of developing and implementing protocols that allow devices to communicate in a standard fashion?
a. Security
b. Compliance
c. Interoperability
d. Privacy
Answer:
Option C i.e., Interoperability is the correct option
Explanation:
Interoperability performs for computers or its components for the purpose to communicate and it is important to improve the development of the Internet of Things. It performs the communication as well as share their services between computer or its components.
It also contains challenges occurred at the time of developing and implementing the protocols by which they communicate.
Given a double variable named x that has been declared and given a value, let's use a binary search technique to assign an estimate of its square root to another double variable, root that has also been declared. Let's assume that x's value is greater than 1.0 -- that will simplify things a bit. Here's the general idea:
Since x>1, we know its square root must be between 1 and x itself. So declare two other variables of type double (a and b say) and initialize them to 1 and x respectively. So we know the square root must be between a and b. Our strategy is to change a and b and make them closer and closer to each other but alway make sure that the root we're looking for is between them. (Such a condition that must always hold is called an invariant.)
To do this we will have a loop that at each step finds the midpoint of a and b. It then squares this midpoint value and if the square of the midpoint is less than x we know that the root of x must be bigger than this midpoint: so we assign the midpoint to a (making a bigger and shrinking our a and b interval by half!)-- and we still can be sure that the root is between a and b. Of course if the midpoint's square is greater than x we do the opposite: we assign b the value of midpoint.
But when to stop the loop? In this exercise, just stop when the interval between a and b is less than 0.00001 and assign root the midpoint of a and b then.
We call this a binary search also because at each stage we cut the interval under consideration in half. Efficient as this method is, old Isaac Newton discovered an algorithm that is even more efficient and that's what the library function sqrt uses.
I have this:
double a=1, b=x;
double mid;
while(a-b>0.00001){
mid=(a+b)/2;
mid=mid*mid;
if (mid
a=mid;
else if(mid>x)
b=mid;
else
root=mid;
}
Answer:now
Explanation:
That’s tough
Which translator program reads small portions of a program at a time, translating them into machine instructions which are then executed immediately?
Answer:
Interpreter is the correct answer for the above question.
Explanation:
The interpreter is a software program which is an example of a translator and it does not take whole code at a time for conversion. It converts the code on a line by line sequence. It takes some small code and then converts it into machine code.While the other translator takes the whole code at a time and converts it into machine code. The above question wants to ask about that technology which is used to convert some small code not the whole code at a time then the answer is an interpreter which is defined as above.Print a message telling a user to press the letterToQuit key numPresses times to quit. End with newline. Ex: If letterToQuit = 'q' and numPresses = 2, print:Press the q key 2 times to quit.Sample program:#include int main(void) { char letterToQuit = '?'; int numPresses = 0; return 0;}
Final answer:
To tell a user to press a certain key a number of times to quit in C, you can use the printf function to format and print the instructions, simply adjusting the variables for the key and number of presses.
Explanation:
The student is asking for assistance in writing a C programming code that prompts a user to press a specific key a certain number of times to perform an action, such as quitting a program. In this scenario, the student needs to complete the program by adding a statement to do this. Here's how you can write the code inside the main function:
#include <stdio.h>
int main(void) {
char letterToQuit = 'q';
int numPresses = 2;
printf("Press the %c key %d times to quit.\n", letterToQuit, numPresses);
return 0;
}
This code snippet sets the letterToQuit to 'q' and numPresses to 2, then it prints the message to the user. Adjust the variables letterToQuit and numPresses as necessary for different requirements.
What sort of software programs are used to determine area of origin
Answer:
HemoSpat bloodstain pattern analysis software is used to calculate the area of origin for influence design at crime scenes. When Performing this directional analysis of impact patterning, the bloodstain pattern analyst can be provided with crucial information about the posture and location of an individual at a bloodletting scene.
vLemsey Corp. specializes in creating computer software. It has been working on an antivirus software that doesn't need regular updates and has the most comprehensive virus database in the market. This software is being tested for design, function, and reliability. In the context of the experiential approach to innovation, the antivirus is a __________.
Answer:
The correct answer to the following question will be "Product prototype".
Explanation:
A prototype is indeed an early model, design, or release of a material constructed for testing a concept or process. It's a concept used in a wide variety of ways, including semi conduct, architecture, appliances, and programming software.
The software is tested for its architecture, functionality, and performance.
Therefore, it's the right answer.
IoT is the interconnection of what?
Hardware
Networks
Everyday devices
Cables
Answer:
Everyday Devices
Explanation:
As we know that Internet of Things (IOT) include connected security systems, thermostats, cars, electronic appliances, lights in household and commercial environments, alarm clocks, speaker systems and vending machines.
Which of the following best describes when a packet is addressed so that more than one destination can receive it and the first octet is in the range 224 to 239?
Answer:
Multicasting
Explanation:
Multicasting refers to a communication technique used in a network environment where data is transmitted to destinations interested to receive the data from the server, where every client can choose whether or not to receive the data. multicasting can be done from one source to many destinations, or many sources to many destinations.
Which of the following is true about ISO___________.
a. It makes technical recommendations about data communications interfaces
b. Its name stands for International
c. Organization for Standardization It is based in Geneva, Switzerland It is one of the most important standards-making bodies
d. All of the above
Answer:
The answer is "Option d".
Explanation:
In the given question in option b and option c, there is some typing mistake, but all the options are correct.
ISO is an organization, that is based on Geneva, which is a member of Switzerland. It provides one of the major guidelines for developing entities, that provides technical suggestions on frameworks for data communication.
It is used to optimize products with businesses across ranges. The primary aim was to facilitate trade, but in several ways, it focus on enhancing procedures, safety, and quality.information related to any DoD program or activity employing enhanced security measures exceeding those normally required for information at the same classification level
Answer:
Special Access Program
Explanation:
Based on the information provided within the question it can be said that the term that is being described is called a Special Access Program. This (like mentioned in the question) refers to security protocols that provide the user with highly classified information safeguards as well as access restrictions way more advanced than those used for regular information. Mainly used by very private corporations and the U.S. Federal Government.
True or False. When used with the cout object, the endl stream manipulator advances the cursor to the next line on the computer screen.
Answer:
The answer is TRUE
Explanation:
When we use Cout object the endl move the cursor to the next line to the computer screen.The endl is a predefined object.It is used to insert a line.
Manipulators are the objects that inserted into a stream and effect the format of objects.Manipulators are used to control the state of stream.
When using the count object the endless stream manipulator advances the cursor to the next line on the computer is True.
What is a stream manipulator. ?The function of the manipulators is used for the conjunction of design with insertion and extraction of the stream object. That has been used for changing the formatting parameters on the changing stream and helps to insert or extract the special character.
Find out more information about the True or False.
brainly.com/question/6279182.
A program is used to convert from minutes to seconds. Write the directive for defining the conversion factor called MINUTE_TO_SECOND_FACTOR as a constant that cannot be changed and define it as a string 60.
Answer:
I am writing a simple program in C++ However, let me know if you need this program to be implemented in some other programming language .
Program#include <iostream>
using namespace std;
#define MINUTE_TO_SECOND_FACTOR 60
int main()
{ int minutes;
cout<<"enter the time in minutes: ";
cin>>minutes;
int output;
output = minutes * MINUTE_TO_SECOND_FACTOR;
cout<<minutes<<" minutes = "<<output<<" seconds.";
Output:enter the time in minutes: 45
45 minutes = 2700 seconds
Explanation:I will explain every line of the code .
The first statement contains a pre-processor directive which is a library that contains input and output functions for a program.The next line namespace is used so that the computer can identify cout, cin and endl used in the program.This is a define directive #define MINUTE_TO_SECOND_FACTOR 60Here define directive is used for declaring a macro which is MINUTE_TO_SECOND_FACTOR. Here this macro is given a value 60. Now wherever in the program this macro is used, it will be replaced by 60. This macro MINUTE_TO_SECOND_FACTOR can be used as a constant and cannot be changed.Next line enters the body of the main function.variable minutes is declared which is used to store the value in minutes. variable is declared which will store the result of the conversion from minutes to seconds.output = minutes * MINUTE_TO_SECOND_FACTOR; statement works as follows:In this statement written above the value of minutes is multiplied by 60 ( value of the macro MINUTE_TO_SECOND_FACTOR) and the result of this multiplication is stored in the output variable.
As we know that 1 minute =60 secondsLet suppose the input number is 45 minutesThen output= 45 * 60
output= 2700 seconds.
Last statement displays the converted value of minutes into seconds which is stored in output variable.Which of the following kinds of computing refers to an environment of servers that house and provide access to resources users access through the Internet?
Answer:
Cloud is the correct answer for the above question.
Explanation:
Missing Information:
The option is missing in the question and the question suggests to choice. The option can be liberated, cloud, disperse, digital for this question in which cloud is the correct answer.
Detailed Explanation:
The cloud is used to store a large amount of data or information for varies users and anyone can store or modify or delete the information from anywhere.This service takes money from the user and gives service to modify, edit or add the data from anywhere using the internet. When a user wants to take the service of the cloud then he needs to contact the cloud service provider, then pays money to them and then he can enjoy the service.The above question wants to ask about the term which is a vast environment of databases that provide access to the users to store and mane the data and that is the cloud which is the correct answer for the above question.A technician is buying a PC that will host three VMs running at the same time with the current configuration. The technician believes there might be a need to run several additional VMs in the near future. Which of the following resources would be the MOST important to upgrade to allow for the additional VMs?A. CPUB. SSDC. NICD. RAM
Answer:
B. SSD
Explanation:
VMs or virtual machines are virtually created environment for multiple operating system on a host operating system. The host operating system has an extension called Hyper-V. The hyper-V manager helps to manage the virtual machine's activities.
The VMs can hold applications in their respective containers, which requires a partition of the storage. So when more VMs are configured, more storage memory is required to store their individual data. The VMs in a computer system can share a network interface card.
Interaction design is a process for designing interactive _______ to support the way people communicate and interact in their everyday and working lives.
Select one:
a. softwares
b. systems
c. products
d. machines
Answer:
Product
Explanation:
Interaction design is a practices of designing interactive digital products and services in such a way it perfectly or closely mimic the way humans communicate and interact in real life scenario. or it can be rephrased as creating a user experiences that augment the way people work, communicate and interact.
interaction design sometimes goes beyond just creating digital products it also useful when creating physical ones.
How is the archaeological record used to date artifacts
Answer:
Explanation:
Small tubes containing CO2 derived from artifacts are placed in an accelerator mass spectrometer (AMS). The AMS will measure the relative proportions of carbon isotopes to determine the objects age. A researcher removes a core sample from a bristlecone pine tree.