A glass jug can be used to play different pitched sounds by blowing air over the opening of the jug and vibrating the air molecules inside the jug. The sound fluctuates with the amount of liquid in the jug, similar to the length of a pipe organ. A musician wishes to play a higher-pitched sound with their jug. What should they do?

Force more air over the opening of the jub

Remove more liquid

Add more liquid

Answers

Answer 1
Add more of the liquid because the length is more redemption.
Answer 2
Final answer:

To increase the pitch of the jug sound, remove more liquid; doing so decreases the air column inside the jug which makes the vibration faster, thereby increasing the pitch.

Explanation:

The pitch of the sound produced by a jug when blown across the top is determined by the column of air that can vibrate inside the jug. The longer the air column, the lower the pitch of the sound, analogous to how longer pipes in a pipe organ produce lower notes. Therefore, to play a higher-pitched sound with a jug, the musician should remove more liquid from the jug. By doing so, he decreases the air column which makes the vibration faster, thus producing a higher-pitched sound. It is important to note that forcing more air over the opening of the jug does not change the pitch of the sound but increases the volume while adding more liquid produces a lower-pitched sound.

Learn more about Sound Pitch:

https://brainly.com/question/12413129

#SPJ11


Related Questions

A skier (68kg) starts from rest but then begins to move downhill with a net force of 92 N for 8.2 s. The hell levels out for 3.5 seconds. On this part of the hill, the net force on the skier is 22 N backwards.
(a) calculate the speed of the skier after 8.2 s
(b) Calculate the speed of the skier at the end of the section where the hill levels out
(c) Calculate the total distance travelled by the skier before coming to rest

Answers

(a) 11.1 m/s

The acceleration of the skier is given by:

[tex]a=\frac{F}{m}[/tex]

where F = 92 N is the net force and m = 68 kg. Substituting,

[tex]a=\frac{92 N}{68 kg}=1.35 m/s^2[/tex]

After 8.2 s, the speed of the skier is

[tex]v=at[/tex]

where

a = 1.35 m/s^2 is the acceleration

t = 8.2 s is the time

Substituting,

[tex]v=(1.35 m/s^2)(8.2 s)=11.1 m/s[/tex]

(b) 10.0 m/s

In this section of the hill, the net force is F = -22 N backwards. So, the acceleration of the skier is

[tex]a=\frac{F}{m}=\frac{-22 N}{68 kg}=-0.32 m/s^2[/tex]

When starting this section, the skier is moving at u = 11.1 m/s. So, the final speed will be:

[tex]v=u+at[/tex]

And substituting t=3.5 s, we find

[tex]v=11.1 m/s+(-0.32 m/s^2)(3.5 s)=10.0 m/s[/tex]

(c) 237.9 m

The distance travelled by the skier in the downhill section is

[tex]d=\frac{1}{2}at^2[/tex]

where a = 1.35 m/s^2 and t = 8.2 s. Substituting,

[tex]d=\frac{1}{2}(1.35 m/s^2)(8.2 s)^2=45.4 m[/tex]

The distance travelled by the skier in the levelled out section is given by

[tex]v^2 - u^2 = 2ad[/tex]

where

v = 0 is the final speed

u = 11.1 m/s is the initial speed

a = -0.32 m/s^2 is the acceleration

d is the distance

Solving for d,

[tex]d=\frac{v^2-u^2}{2a}=\frac{0-(11.1 m/s)^2}{2(-0.32 m/s^2)}=192.5 m[/tex]

So, the total distance is

d = 45.4 m + 192.5 m = 237.9 m

which of the following is true of a mechanical wave​

Answers

- They require a physical medium to propagate.

- They can be described in terms of frequency, wavelength, and amplitude.

- They can be refracted, reflected, and diffracted.

- They can transfer energy from one point to another.

You add 500ml of water at 10celsius to a 100ml of water at 70 Celsius. What is the most likely final temperature of the mixture?
A.10c
B.20c
C.80c
D.60c

Answers

I wanna say it’s C.

Answer:

C. 20c

Explanation:

A box of mass 50 kg is pushed hard enough to set it in motion across a flat surface. Then a 99-N pushing force is needed to keep the box moving at a constant velocity. What is the coefficient of kinetic friction between the box and the floor?

0.23

0.20

0.18

0.17

Answers

Answer:

0.20

Explanation:

The box is moving at constant velocity, which means that its acceleration is zero; so, the net force acting on the box is zero as well.

There are two forces acting in the horizontal direction:

- The pushing force: F = 99 N, forward

- The frictional force: [tex]F_f=\mu mg[/tex], backward, with

[tex]\mu[/tex] coefficient of kinetic friction

m = 50 kg mass of the box

g = 9.8 m/s^2 gravitational acceleration

The net force must be zero, so we have

[tex]F-F_f = 0[/tex]

which we can solve to find the coefficient of kinetic friction:

[tex]F-\mu mg=0\\\mu = \frac{F}{mg}=\frac{99 N}{(50 kg)(9.8 m/s^2)}=0.20[/tex]

Use the drop-down menus to identify the parts of DNA. Label A: Label B:

Answers

Label A:

Nitrogen bases

Label B:

Sugar-phosphate backbone

Answer:

Nitrogen bases

Sugar-phosphate backbone

Explanation:

Please need help on this

Answers

C would be the answer

the process of restoring land that has been mined so I guess the answer would be C.

A particle of mass 13 g and charge 45 μC is released from rest when it is 77 cm from a second particle of charge −11 μC. Determine the magnitude of the initial ac- celeration of the 13 g particle.

Answers

Answer:

[tex]577.7 m/s^2[/tex]

Explanation:

First of all, we need to calculate the electric force exerted on the particle. This is given by:

[tex]F=k\frac{q_1 q_2}{r^2}[/tex]

where:

k is the Coulomb's constant

[tex]q_1 = 45 \mu C=45 \cdot 10^{-6}C[/tex] is the charge of the particle

[tex]q_2 = -11 \mu C = -11 \cdot 10^{-6}C[/tex] is the charge of the second particle

[tex]r=77 cm=0.77 m[/tex] is the initial separation between the particles

Substituting,

[tex]F=(9\cdot 9 Nm^2C^{-2})\frac{(45\cdot 10^{-6}C)(-11 \cdot 10^{-6}C)}{(0.77 m)^2}=-7.51 N[/tex]

where the negative sign tells us that it is an attractive force. We can ignore it since we are only interested in the magnitude of the acceleration, which is given by

[tex]a=\frac{F}{m}[/tex]

where

m = 13 g = 0.013 kg is the mass of the particle

Substituting, we find

[tex]a=\frac{7.51 N}{0.013 kg}=577.7 m/s^2[/tex]

What causes the phases of our moon

Answers

sunlight, and the position of the earth

A substance has a half-life of 10,000 years and an initial mass of 1,000 grams. How many years will pass before only 250 grams of the substance's parent material is left?

A. 20,000
B.25,000
C. 30,000
D.40,000

Answers

♫ - - - - - - - - - - - - - - - ~Hello There!~ - - - - - - - - - - - - - - - ♫

After 10,000 years the mass will be:

1,000 / 2 = 500

After 20,000 years the mass will be:

500/2 = 250

As you can see, the correct answer would be A. 20,000 years

Hope This Helps You!

Good Luck (:

Have A Great Day ^-^

↬ ʜᴀɴɴᴀʜ

Answer:

A). [tex]t = 20,000 years[/tex]

Explanation:

Half life is the total time after which the substance will decay and remains only half of the initial amount

So here we will say that

initial amount is 1000 gram

Now after one half life only half of the amount will remain

so it is

[tex]m_1 = 1000/2 = 500 gram[/tex]

now again after another half life it will remain half of the initial amount

so it is

[tex]m_2 = 500/2 = 250 gram[/tex]

so it took two half lives

[tex]t = 10,000 + 10,000[/tex]

[tex]t = 20,000 years[/tex]

Lindsay has placed on object to the left of the lens, indicated by the bold line to project its image onto a screen. What actions would provide a clear image that is larger?

A)Move the object and image to the left.B)Move the object and image to the right.C)Move the object to the left and the screen to the right.D)Move the object to the right and the screen to the left.

Answers

b.Move the object and image to the right.

To obtain a clear image that is larger, Lindsay should move the object to the left and the screen to the right. Option C is correct.

What is the lens?

A lens is a clear object made of glass or plastic that can bend (refract) and focus light.

When an object is placed to the left of a converging lens, a real and inverted image is produced on the other side of the lens. The size and position of the image are determined by the distance between the object and the lens, as well as the distance between the lens and the image.

To obtain a larger image, move the object closer to the lens or move the screen further away from the lens.. Moving the object and image to the right would make the image smaller, and moving the object and image to the left would not necessarily make the image larger or clearer.

Therefore, option C) Move the object to the left and the screen to the right is the correct answer to obtain a clear image that is larger.

Learn more about the lens here:

https://brainly.com/question/766997

#SPJ6

How is data not actually obtained from the experiment represented in a line graph?


with a double line
with only dots
with a colored line
with a broken line

20 POINTS!

Answers

With a broken line????????

Answer:

broken line

Explanation:

A person weighs 650 N. What is the mass of the person?

Answers

1 KG=9.8 newtons.

Thus ,

[tex]650N*\frac{1 KG}{9.8N}=around 66.3[/tex]

A person weighs 650 N and weight is the product of mass and acceleration due to gravity, so the mass of the person will be 66.32 kg.

What is the acceleration due to gravity?

Gravitational acceleration is the acceleration that an object experiences as a result of the gravitational force. It has the SI unit meter per second square. Indeed a direction and a magnitude are present. It is therefore a vector field.

We use the letter G to denote gravitational acceleration. Its normal value for the earth's surface at sea level is 9.8 m/s². Based on Newton's Second Law of Motion and Law of Universal Gravitation, its calculation.

Given information according to the question is,

Weight, w = 650 N

[tex]Weight(w) = Mass(m)*Acceleration\ due\ to\ gravity(g)[/tex]

650 N = m × 9.8 m/s²

m = 650 / 9.8

m = 66.32 kg.

Therefore, the mass of the person is 66.32 kg.

To know more about acceleration due to gravity :

https://brainly.com/question/13860566

#SPJ2

11. How many times could Haley fly between the two flowers in 1 minute (60 seconds)?


Answers

Final answer:

Without additional information on Haley's flying speed and the distance between flowers, we cannot calculate the number of times she could fly between the two flowers in one minute.

Explanation:

To determine how many times Haley could fly between the two flowers in 1 minute, we need additional information such as the distance between the flowers and the speed at which Haley flies. Since this information is not provided, we cannot accurately calculate the number of times Haley could make the trip. We can however provide information on how to approach the problem once the relevant data is available.

If we knew the flight time for one trip between the flowers, we could divide 60 seconds by that flight time to find out how many trips could be made in a minute. For example, if it takes Haley 5 seconds to fly between two flowers, then she could make 12 trips in one minute (60 seconds divided by 5 seconds per trip).

The molar mass of a gas

Answers

Answer:

dependent on the type of gas and the mass of a mole of the gas

Explanation:

answer to question 4

Answers

(A) is the answer for #4

What is the equation for calculating the electrical force, Fe, between two charges?

Answers

When 2 electric charges are place close to each other they experience a force between them. This force may be repulsive or attractive depending on the type of charges involved.

The magnitude of this force depend on the quantity of individual charges and the distance between them.

The force is defined  by the Coulomb's law states that: The magnitude of the electrostatic force of attraction or repulsion between two point charges is directly proportional to the product of the magnitudes of charges and inversely proportional to the square of the distance between them.

The formula for calculating the force between 2 electric charges is ;

F = (kq₁q₂)/d²

Where  k is the proportionality constant known as Coulomb's constant,

            q₁ and q₂ are the charges and

            d is the distance between q₁ and q₂.

Answer:

C

Explanation:

I did the test kinda sorta and I got this.

A ball is dropped from the roof of a building. If it takes 2.6s to reach the ground how tall is the building

Answers

To find the height of the building, we use the free-fall equation s = ut + ½ at² with the time of fall (2.6s), resulting in a height of approximately 33.18 meters.

To calculate the height of the building given that a ball is dropped and takes 2.6 seconds to reach the ground, we can use the equations of motion for an object in free fall. Assuming the initial velocity (u) is 0 m/s (since the ball is dropped) and acceleration (a) is due to gravity (g = 9.81 m/s²), the equation we use is:

s = ut + ½ at²

Where:

s = distance in meters (height of the building)u = initial velocity in m/st = time in secondsa = acceleration due to gravity in m/s²

Plugging in the values, we have:

s = 0 m/s (2.6 s) + ½ (9.81 m/s²)(2.6 s)²

s = ½ (9.81 m/s²)(6.76 s²)

s = 4.905 m/s² × 6.76 s²

s = 33.1763 m

Therefore, the height of the building is approximately 33.18 meters.

What two element is present in biotite mica that is not present in muscovite mica?

Answers

Potassium iron magnesium aluminum silicate hydroxide and Potassium magnesium aluminum silicate hydroxide.

Final answer:

The two elements present in biotite mica but absent in muscovite mica are iron (Fe) and magnesium (Mg). This difference is observable in the chemical formulas of the two minerals. Both types are phyllosilicate minerals but have different chemical compositions.

Explanation:

The two elements present in biotite mica that are not present in muscovite mica are iron (Fe) and magnesium (Mg). Biotite mica is a type of phyllosilicate mineral that contains these two elements. On the other hand, muscovite mica, although also a type of phyllosilicate mineral, does not contain iron and magnesium.

In chemical terms, the formulas for these minerals summarize their differences. Biotite's formula is K(Mg,Fe)3AlSi3O10(OH)2, while muscovite's formula is KAl2(AlSi3O10)(OH,-F)2. In the formulas, you can clearly see that both contain potassium (K), aluminum (Al), silicon (Si), and oxygen (O), but only biotite has iron and magnesium.

Learn more about Biotite and Muscovite Mica here:

https://brainly.com/question/32660535

#SPJ2

the mass of the sled 329 kg, V=34m/s. What is the magnitude of the centripetal force that acts on the sled during the turn with radius of 33.0m?

Answers

Hello

The formula for centripetal force is:

Fc = m*[(V^2)/r]

Where

m = 329000 g

V = 34 m/s

r = 33 m

Then

Fc = (329000)*[(34^2)/33]

Fc = 11.524.969,7

Best regards

The graph above represents an object moving with a __________________. A) constant velocity Eliminate B) constant acceleration C) constant positive acceleration D) constant negative acceleration



The answer is D

Answers

Answer:

D) constant negative acceleration

Explanation:

Acceleration is defined as the ratio of changing of the velocity per unit time:

[tex]a=\frac{\Delta v}{\Delta t}[/tex]

where v is the velocity and t the time.

In a velocity-time graph, as the one above, the ratio between change in velocity and change in time corresponds to the slope of the curve. In fact, the slope of the curve is defined as

[tex]m=\frac{\Delta y}{\Delta x}[/tex]

where

[tex]\Delta y[/tex] is the increment in the y-variable, which corresponds to the change in the velocity, [tex]\Delta v[/tex]

[tex]\Delta x[/tex] is the increment in the x-variable, which corresponds to the change in the time, [tex]\Delta x[/tex]

So, since the slope in this case is 1) constant and 2) negative, this means that the acceleration is also constant and negative.

Answer:

It’s c. Constant positive acceleration

Explanation:

How do you answer this. Need help ASAP. Offering 20 points !!!

Answers

in this since your volume remains at a constant you'll need to use Gay-Lussacs law, p1/t1=p2/t2.

your temp should be converted in kelvin

variables:

p1=3.0×10^6 n/m^2

t1= 270k

just add 273 to your celcius

p2= ? your solving for this

t2= 315k

then you set up the equation

(3.0×10^6)/270= (x)(315)

you then cross multiply

(3.0×10^6)315=270x

distribute the 315 to the pressure.

9.45×10^8=270x then you divide 270 o both sides to get

answer

3.5×10^6 n/m^2

Which of the following will increase if the voltage in a circuit is increased? check all that apply

a.) Current

b.) Resistance

c.) Heat produced by the circuit

d.) Magnetic force

Answers

When the voltage in the circuit is increased, the following will happen: The correct choices are: a, c, and d.

Current will increase. (a)Heat produced by the circuit will increase. (c)Magnetic force will increase. (d)

Current (a): According to Ohm's Law, which is given by the formula  (where  is voltage,  is current, and  is resistance), if the voltage () increases and the resistance () remains constant, the current () will increase. This happens because current is directly proportional to voltage. So, an increase in voltage leads to an increase in current.

Resistance (b): Resistance in a circuit is typically a property of the materials involved and does not change with the voltage applied. For most materials and simple circuits, the resistance remains constant regardless of changes in voltage. Therefore, increasing the voltage does not increase the resistance.

Magnetic force (d): Magnetic force generated in a circuit, particularly around conductors, depends on the current flowing through the circuit. Since increasing the voltage (with constant resistance) leads to an increase in current, the magnetic force would also increase as a result.

During a skydiving landing, a parachute deploys from the back of the diver as it taxis back down to the Earth. The parachute helps the diver slow down before landing. How does the parachute help during this process? * 1 point It increases the weight of the shuttle. It increases the potential energy of the shuttle. It increases heat transfer by radiation. It increases friction by air resistance.

Answers

Your answer would be - It increases friction by air resistance.

Hope this helps you:)

Feel free if you want me to clarify something!

Final answer:

A parachute slows a skydiver's descent by increasing air resistance, acting against the skydiver's downward momentum. The parachute's increased surface area amplifies this resistance, significantly reducing speed for a safer landing.

Explanation:

A parachute assists a skydiver during landing by increasing air resistance, which slows the skydiver's descent by increasing the upwards force of air pushing against the diver. The open canopy of the parachute expands the surface area against which the air pushes, thereby increasing the air resistance. Initially, the skydiver is in free fall, attaining a maximum or 'terminal' velocity depending on body position. For instance, terminal velocity can be as high as 350 km/h in a headfirst position. The deployment of the parachute dramatically reduces this speed due to the increased air resistance.

It's like dropping a baseball and a tennis ball from the same height at the same time; the baseball will hit the ground first due to less air resistance compared to the lighter tennis ball.

The parachute's role is essential to slow a skydiver's fall, reducing the risk of injury upon landing by decreasing the skydiver's change in momentum on impact.

Learn more about Parachute and Air Resistance here:

https://brainly.com/question/2292477

#SPJ3

The frequency of a wave is the inverse of the wave's _______?

period
velocity
amplitude
wavelength.​

Answers

The frequency of a wave is the inverse of the wave's period.

(Instead of "inverse", the word "reciprocal" is more appropriate.  

It means that [ frequency = 1/period ], and [ period = 1/frequency ].

The easiest way to remember both of these is to just remember that (frequency) x (period) = 1 .)

Answer:

period

Explanation:

If you comb your hair and the comb becomes negatively charged, your hair becomes?


Answers

A positive charge cause dosent your hair static up when that happens or no?

The negative charges transfer from your hair to the comb, this leads the comb to be negatively charged and your hair to become positively charged.

which of the following objects can you use to roughly visualize a length of 1 meter​? the length of an ant on a sidewalk? the length of a 2 liter bottle of soda pop? the height of a kitchen counter? the length of a football field?

Answers


The height of a counter would be the closes to one meter.
an ant is about 0.125 inches long, a 2 liter soda bottle is 12 inches long, a kitchen counter is 36 inches tall, and a football is 4,320 inches long. a meter is about 39 inches, which is closest to the height of a kitchen counter.

When an object is lifted 12 meters off the ground, it gains a certain amount of potential energy. If the same object is lifted 36 meters off the ground, its potential energy is

Answers

Final answer:

Lifting an object to a greater height increases its gravitational potential energy. The potential energy is calculated as the product of the object's mass, gravitational acceleration, and height. Tripling the height triples the potential energy.

Explanation:

When an object is lifted higher off the ground, it gains gravitational potential energy proportional to its height above the ground. This potential energy (PE) depends on the mass of the object (m), the acceleration due to gravity (g), and the height (h) above the ground. For the given 1360 kg automobile, the potential energy can be calculated using the equation PE = mgh. If we know the car gains a certain amount of potential energy at a height of 12 meters, lifting it to 36 meters, or three times that height, will result in three times the potential energy. To demonstrate, let's say the car is lifted to 36.6 m, the potential energy will be PE = 1360 kg × 9.81 m/s² × 36.6 m.

A coin placed at a focal point of a converging lens. is an image is formed? what is its nature?

Answers

Answer: The image is formed at infinity and its nature is virtual

A converging lens is a type of optical lens that is thicker at the center than at its edges; this type of lens concentrate or converge (that is why its name) at a point the rays of light that pass through it.

If we talk about the formation of the image, its location and nature will depend on where the object is located with respect to the focal length of the lens. So, in general:

- If the object is considerable away from the focal point, a real image (which can be projected on a screen) will be formed, inverted and smaller than the object.

-If the object is very close to the focal point, a virtual image will be observed (it is given this name because the image can not be projected on a screen) upright and bigger than the object.

Now, if the object is placed right at the focal point, the image would be formed at infinity (therefore, we would not see it) and its nature would be virtual.

According to this, the image of the coin will not be seen.

If the object is positioned at the focal point, the image is formed at infinity and its nature is virtual.

What is a lens?

The term lens refers to any refracting surface. Recall that refraction is the bending of the light ray at the interval between two media.

The nature of the image formed by a lens depends on the position of the object. If the object is positioned at the focal point, the image is formed at infinity and its nature is virtual.

Learn ore about lens: https://brainly.com/question/11334504

A 10.0g piece of copper wire, sitting in the sun reaches a temperature of 80.0 C. how many Joules are released when the copper cools to 40.0 C? The specific heat capacity of copper is 0.377 j/(g.C)

Answers

Answer:

150.8 J

Explanation:

The heat released by the copper wire is given by:

[tex]Q=mC_s \Delta T[/tex]

where:

m = 10.0 g is the mass of the wire

Cs = 0.377 j/(g.C) is the specific heat capacity of copper

[tex]\Delta T=40.0 C - 80.0 C=-40.0 C[/tex] is the change in temperature of the wire

Substituting into the equation, we find

[tex]Q=(10.0 g)(0.377 J/gC)(-40.0^{\circ})=-150.8 J[/tex]

And the sign is negative because the heat is released by the wire.

In which order would the the rocket pass through the layers of the atmosphere

Answers

Final answer:

A rocket ascending from Earth passes through the atmosphere in the following order: troposphere, stratosphere, mesosphere, thermosphere, and then the exosphere.

Explanation:

The question pertains to the order in which a rocket would pass through the layers of Earth's atmosphere. The layers of the atmosphere, starting from the surface of Earth moving outward into space, are the troposphere, stratosphere, mesosphere, thermosphere, and finally the exosphere. As a rocket ascends from Earth's surface on its journey into space, it first moves through the troposphere, where weather phenomena occur, then into the stratosphere, known for its ozone layer that absorbs and scatters the sun's ultraviolet radiation. Following the stratosphere, the rocket enters the mesosphere, where meteors burn up upon entry. The journey continues through the thermosphere, the largest layer, where auroras occur and temperatures increase significantly with altitude due to solar radiation absorption. Finally, the rocket reaches the exosphere, the outermost layer where Earth's atmosphere merges into the vacuum of space.

Other Questions
What is the best example of a complex character _____________ are places on Earth's surface where the crust has stretched until it has broken. Which of the following is NOT one of the basic components of bonds? A Coupon rateB MaturityC LiquidityD Per value A student is asked to factor, if possible, the given expression. The student's response demonstrates which common misconception? Simplify: a2 + b2 Student's response: (a + b)(a b) NEED HELP ASAP!!!!!!!!!!!!!!!!Find the sum and then classify it. 3/4 + 64A) 2.9580398..., irrationalB) 8.0467384..., irrational C) 8.75, rationalD) 64.75, rational An astronomer who wishes to photograph the light spectrum would use a: spectrograph radio telescope refracting telescope reflecting telescope Help with the questions above? Super easy! But thanks!! A cube has 6 faces that are all ______. Fill in the rest Find the distance between the points (4, 2) and (-8, 7).A.13B.15C.12D.11Please select the best answer from the choices providedABCD Triangle abc has vertices A (4,3) B(1,4) and c (2,1) . What are the vertices of the image after the reflection across the line y=-1 In what way are the humerus and the femur similar?A-They both attach their respective limbs to the axial skeleton.B-they both have similar joints at the end.C-they both are extremely long and made of compact bone.D-they both have hollow space is filled with bone generating cells.E-they both protect vital organs. Estimate the probability of each event occurring. Write the probability as a fraction, as a decimal, and as a,percent.1- One of the next 7 days will be a Friday. Many whites were scared away from supporting the civil rights movement because ofA) the black power movement B) the election of Lyndon Johnson C) the popularity of Martin Luther King Jr.D) the use of nonviolent protests If the federal reserve increases its bond purchases, the short-run effects will be What is the percent composition of each element in S2Br Which operation should be performed last in this problem: 3^2 + 7 4? Why? What is the square root of 64^16 Find the surface area of a sphere with radius 1/4 in terms of pi If the number of particles in a sample of gas is doubled,what happens to the volume of the gas A)The volume of gas doubles B) The volume of the gas triples C) The volume of the gas is reduced by one-half D) The volume of the gas remains the same Read the paragraph. Cathy promised Jordan that when she went to court she would not disclose any information about his involvement with the burglary. She knew he was remorseful for his crime and she was afraid that he would be angry with her if she got him in trouble. When she stood in front of the judge, she took an oath that her testimony was true. Crossing her fingers behind her back, Cathy willingly told a lie to protect her friend. However, her false statements were obvious to the judge and jury, and Cathy found herself in a mess of legal trouble because of her perjury. What information from the paragraph most effectively indicates the meaning of perjury? Steam Workshop Downloader