A fast-moving vw beetle traveling at 54 mph hit a mosquito hovering at rest above the road. which bug experienced the largest force? 1. the insect 2. the vw 3. unable to determine 4. they experienced the same magnitude of force

Answer:

Work done, W = 3200 ergs

Explanation:

It is given that

Force acting on the object, F = 0.01 N

Distance covered by the object, d = 0.032 m

Let W is the work done by the object. The product of force and the distance is called the work done by the object. Mathematically, it is given by :

[tex]W=F\times d[/tex]

[tex]W=0.01\ N\times 0.032\ m[/tex]    

W = 0.00032 Joules

Since, [tex]1\ joule=10^7\ ergs[/tex]

This gives, work done by the object, W = 3200 ergs. So, the correct option is (a).                                                          

Final answer:

The narrow and steep valley with a stream at the bottom that Tanya observed was most likely formed primarily by tectonic activity, with subsequent shaping by erosion from streams and other processes such as wind and landslides.

Explanation:

Tanya most likely observed a valley that formed through tectonic activity, where over time, crustal tensions created narrow and steep valleys. These cracks may then have been further shaped by erosion from streams at the bottom, along with other processes such as wind and landslides. Such valleys are often further deepened and widened as water continues to erode the valley floor and sides. In some cases, valleys like this can also be created or shaped by the movement of glaciers, which carve out the terrain beneath them. However, the presence of the stream at the bottom of the valley Tanya observed suggests that water played a significant role in its formation.

Final answer:

The relationship between force and potential energy is that potential energy is defined within a conservative field based on the position, and force is the negative gradient of the potential energy. It is exemplified in gravitational and electric potential energies, with voltage used as a practical measure for electric potential energy.

Explanation:

Relationship Between Force and Potential Energy

The relationship between force and potential energy is intrinsic and significant in physics. When a force is conservative, which means it allows the energy to be conserved within a system, a potential energy can be defined and associated with that force. This potential energy is dependent only on the position within a conservative field, making it an efficient way to discuss energy changes without having to deal with the force that caused these changes directly. The connection is mathematically represented by the force being equal to the negative gradient of the potential energy.

The most common examples of this relationship are seen in gravitational potential energy and electric potential energy. Gravitational potential energy is the work done by gravitational force on an object due to its position relative to a larger mass, like Earth. Analogously, electric potential energy is work done by electric forces within an electric field, and is often referred to through the concept of voltage, which simplifies electrical interactions by focusing on energy per charge instead of the actual interaction forces.

Understanding potential energy and its relation to force, especially in conservative fields, deepens our comprehension of energy transformations. For example, when we lift a rock off the ground, we are increasing its gravitational potential energy by doing work against gravitational forces. If the rock is dropped, this potential energy transforms into kinetic energy as the force of gravity acts on the rock, accelerating it downwards.

To find the airplane's actual velocity, vector addition is used by breaking down the airplane's and wind's velocities into their respective components and summing them up. Trigonometry and the Pythagorean theorem are used for the calculations.

The student's question involves calculating the actual velocity of an airplane considering both its speed in a given direction and the effect of wind blowing in a different direction. This is a typical vector addition problem in physics where velocities are vectors; hence they have both magnitude and direction.

To compute the plane's actual velocity, you would break down the plane's and the wind's speeds into their north-south and east-west components and then add these components vectorially. The process uses trigonometric functions to determine the components and then applies the Pythagorean theorem to find the magnitude of the resultant velocity. The direction can be calculated using the arctangent function.

For example: An airplane with a velocity of 340 km/hr at 120° east of north can be broken down into an eastward component and a northward component. Similarly, the wind's velocity of 40 km/hr at 34° south of east would also have an eastward and a southward component. Adding or subtracting these components according to their directions will give the actual velocity of the airplane.

The acceleration of the elevator can be calculated using Newton's second law of motion and the recorded changes in weight on the scale while standing in the elevator. When the elevator begins its ascent, the apparent weight increases due to the increased force needed to move upward, which can be converted to calculate the acceleration.

The subject of your question involves understanding the physics concepts of acceleration and force. When standing in an elevator that is accelerating upwards, the scale reads a higher weight because the scale must exert more force to move you upwards, resulting in a feeling of being heavier.

To determine the acceleration of the elevator, we first need to comprehend the concept of net force, which in this scenario, is the difference between your apparent weight (the reading on the scale) and your actual weight. From Newton's second law, we know that net force is equal to mass times acceleration (F=ma).

So, if your weight on the scale varies between 110 lb and 160 lb, then the difference is 50lb. Converting this weight difference to force (gravity being ~9.8 m/s^2), we get approximately 222.41 Newtons.

Given that your regular weight is 130lb, converting this to mass gives us approximately 59 kg (1lb ≈ 0.453592 kg). So, we can now find the acceleration (a) using the formula a = F/m. Substituting the values, we get the acceleration as approximately 3.76 m/s² as the elevator starts upward. Note that this is an ideal value, actual acceleration would be less due to factors like air resistance, friction, etc.

https://brainly.com/question/33808876

#SPJ12

The distance between two airplanes that have flown in different directions for a certain period of time can be calculated using the principles of relative velocity and the law of cosines in vector operations.

This question involves concepts of relative velocity and vector operation in physics. To find how far apart the two airplanes are after 2.9 hours, we first need to calculate how far each plane has traveled in their separate directions. The distance traveled by each airplane is calculated using the formula distance = speed x time.

For the first plane, the distance is 650 m/h x 2.9 h = 1885 m; And for the second plane, it's 560 m/h x 2.9 h = 1624 m. However, they've traveled these distances at different directions (angles). Hence, we then have to calculate the resultant distance between these two paths, which is a task of vector analysis. We'll use the law of cosines because the heading direction forms an angle between two vectors.

Using the Law of Cosines, the resultant distance, d can be found with the formula [tex]d^2 = D1^2 + D2^2 - 2*D1*D2*[/tex]cos(Δθ), where D1 and D2 are the distances traveled by each plane, and Δθ is the difference in their heading angles (85°-60.5°). Putting the distances and the angle in the formula will then give us the resultant separation between the two planes after 2.9 hours.

https://brainly.com/question/34025828

#SPJ12

A wireless mouse is a battery-powered mouse that uses radio waves or bluetooth technology to communicate with a device.

A battery-powered mouse that uses radio waves or bluetooth technology to communicate with a device is called a wireless mouse. A wireless mouse eliminates the need for a physical connection between the mouse and the device, allowing for greater freedom of movement. The mouse is powered by batteries and uses either radio waves or bluetooth technology to transmit signals to the device.

Answer:

The correct answer is B) Fewer peaches will be sold.

Explanation:

Hope this helps! :)

The formula relating acceleration and angular velocity is:

a = ω^2 r

where a is acceleration, ω is angular velocity and r is radius

But the angular velocity ω is constant all throughout the disk therefore:

a1 / r1 = a2 / r2

So at points:

r1 = 0.0130 m     -> a1 = 393 m/s^2

r2 = 0.0884 m     -> a2 = ?

393 / 0.0130 = a2 / 0.0884

a2 = 2,672.4 m/s^2

Alpha emission radiation is given off in the given nuclear reaction.

When the nucleus of an atom becomes unstable (the ratio of neutrons to protons is too low), alpha particles are released to bring the atom back into equilibrium.

Alpha decay occurs in high-atomic-number elements including uranium, radium, and thorium.

Alpha decay is a form of radioactive disintegration in which certain unstable atomic nuclei spontaneously release an alpha particle to expend excess energy.

Because alpha particles have two positive charges and a mass of four units, they form offspring nuclei with a positive nuclear charge or atomic number two units lower and a mass four units lower than their parents.

As a result, polonium-210 (mass number 210 and atomic number 84, i.e. a nucleus with 84 protons) decays to lead-206 by alpha emission (atomic number 82).

Hence alpha emission radiation is given off in the given nuclear reaction.

To learn more about the alpha emission radiation refer to the link;

https://brainly.com/question/491523

Sound waves

Earthquake P-waves

Longitudinal waves are waves in which the vibration of the medium is parallel to the direction the wave travels and displacement of the medium is in the same direction of the wave propagation.

Read more about waves:

https://brainly.com/question/2440839

Answer:

Hydrogen is a colorless, tasteless, and odorless gas.  

physical

Hydrogen is very combustible in the presence of oxygen.  

chemical

Hydrogen is very reactive with most elements.  

chemical

Hydrogen is the least dense of all elements.  

physical

Explanation:

I put these in order

Hydrogen is a colorless, tasteless, and odorless gas.

Hydrogen is very combustible in the presence of oxygen.

Hydrogen is very reactive with most elements.

Hydrogen is the least dense of all elements.

The rate at which energy is transformed is called power, which is measured in watts. One watt equals one joule of energy transferred per second. This concept is important in understanding energy use and efficiency.

The rate at which energy is transformed or transferred is called power. Power is measured in watts (W) in the International System of Units (SI). One watt is equal to one joule of energy transformed per second.

For example, if a light bulb transforms 60 joules of electrical energy into light and heat energy every second, we would say that the power of the light bulb is 60 watts.

By understanding the rate of energy transformation, we can calculate how much energy a device uses over a given period of time, which is useful for things like understanding electricity bills or determining the efficiency of different appliances.

https://brainly.com/question/34796857

#SPJ6

Formed from melting glaciers

Most lakes are formed from melting glaciers.

The motion of a biker can be determined by analyzing the velocity-time graph. The slope of the graph indicates acceleration and the direction of motion.

The motion of a biker as shown by the velocity-time graph in figure 1b can be determined by analyzing the graph. In the graph, the biker's velocity changes over time. The slope of the graph represents the acceleration of the biker. If the slope is positive, it indicates that the biker is accelerating in the positive direction. If the slope is negative, it indicates that the biker is decelerating or moving in the negative direction.

For example, if the graph shows a straight line with a positive slope, it means that the biker is accelerating at a constant rate in the positive direction. If the graph shows a curved line with an increasing slope, it means that the biker is accelerating at an increasing rate. Conversely, if the graph shows a curved line with a decreasing slope, it means that the biker is decelerating or slowing down.

By analyzing the velocity-time graph, we can understand how the biker's motion is changing over time and determine important aspects such as acceleration and direction of motion.

Answer:

[tex]a = 1500 m/s^2[/tex]

Explanation:

Initial speed of the rocket is ZERO as it starts from rest

[tex]v_i = 0[/tex]

final speed of the rocket is 75 m/s

[tex]v_f = 75 m/s[/tex]

so we will say that average acceleration is defined as rate of change in velocity

so it is given as

[tex]a = \frac{v_f - v_i}{\Delta t}[/tex]

[tex]a = \frac{75 - 0}{0.05}[/tex]

[tex]a = 1500 m/s^2[/tex]

The average acceleration of the water rocket is 1500 m/s².

To find the average acceleration of the water rocket, we can use the formula:

average acceleration = change in velocity / change in time

Given that the rocket reaches a speed of 75 m/s in 0.050 seconds, the change in velocity is 75 m/s and the change in time is 0.050 seconds. Plugging these values into the formula, we get:

average acceleration = 75 m/s / 0.050 seconds = 1500 m/s²

https://brainly.com/question/33442003

#SPJ3

The law of conservation of mass, established by French chemist Antoine Lavoisier, states that matter is neither created nor destroyed in a chemical reaction, ensuring that the mass remains unchanged in a closed system.

The law of conservation of mass states that in a chemical reaction, matter cannot be created or destroyed. This fundamental principle was established by Antoine Lavoisier, a French chemist, in the year 1789. Essentially, this means that the mass of the reactants, or the starting materials, is equal to the mass of the products formed as a result of the chemical reaction. Even though matter may change form into liquids, gases, or solids during a reaction, the total mass remains constant within a closed system. An everyday example of this law is the burning of wood, where the combined mass of the resultant soot, ashes, and gases is equal to the mass of the original wood and oxygen.

Answer: Correct answer is "The marbles horizontal velocity changes, but its vertical velocity does not."

Explanation: I have had the same question on my High School Physics test, and got the answer correct.

Answer: The terminal velocity of the skydiver is 281.30 m/s.

Explanation:

Mass of the sky diver = 75 kg

Density of the air at height of 39,000 m =4.3% of the surface density of the air

= [tex]1.2 kg/m^3\times \frac{4.3}{100}=0.0516 kg/m^3[/tex]

Cross sectional area of the sky diver , A = [tex]0.72 m^2[/tex]

Coefficient of drag ,C = 0.5

The terminal speed is given by the formula:

[tex]v_T=\sqrt{\frac{2mg}{c\rho A}}[/tex]

[tex]v_T=\sqrt{\frac{2\times 75 kg\times 9.8 m/s^2}{0.5\times 0.0516 km/m^3\times 0.72 m^2}}=281.30 m/s[/tex]

The terminal velocity of the skydiver is 281.30 m/s.

The terminal speed of the skydiver is [tex]\boxed{281.452{\text{ m/s}}}[/tex].

Further Explanation:

When a body falls from the sky it will accelerate continuously in the downward direction by the force of gravity results in increment in the acceleration. Another force is acting on the body is friction force due to air or the particles present in the atmosphere in the in the upward direction or opposite to the direction of motion also called drag force. The drag force is directly proportional to the square of the velocity of falling body. Therefore, with increase in the velocity the drag force also increasing which is proportional to equal to the square of the velocity of falling body. And time will come where the drag force is equal to the weight or the force of gravity results in zero resultant force means zero acceleration. At this point the speed become constant and reached its maximum velocity. This speed is called the terminal velocity.

Given:

The height of the jump is [tex]39000\text{ m}[/tex].

The density air is [tex]4.3\%[/tex] of the surface density.

The density of air at sea level is [tex]1.2{\text{ kg/}}{{\text{m}}^3}[/tex].

The mass of the skydiver is [tex]75\text{ kg}[/tex].

The cross sectional area of the skydiver is [tex]0.72{\text{ }}{{\text{m}}^2}[/tex].

Concept:

The expression for the terminal speed is:

[tex]\fbox{\begin\\{v_t} =\sqrt {\dfrac{{2mg}}{{\rho A{C_d}}}}\end{minispace}}[/tex]                                                                                                                                                           …… (1)

Here, [tex]{v_t}[/tex] is the terminal speed, [tex]m[/tex] is the mass of the skydiver, [tex]g[/tex] is the acceleration due to gravity, [tex]\rho[/tex]  is the density, [tex]A[/tex] is the cross sectional area and [tex]{C_d}[/tex] is the drag coefficient.

The term [tex]g[/tex] is called acceleration due to gravity and it has a constant value of [tex]9.81{\text{ m/}}{{\text{s}}^2}[/tex] and the drag coefficient of a human in free fall is [tex]0.5[/tex].

The density of the air at the altitude of [tex]39000\text{ m}[/tex] is:

[tex]\rho=4.3\%\times{\rho _{air}}[/tex]

Here,[tex]\rho[/tex]  is the density of the air at the altitude of [tex]39000\text{ m}[/tex] and [tex]{\rho _{air}}[/tex] is the surface density of the air.

Substitute [tex]1.2{\text{ kg/}}{{\text{m}}^3}[/tex] for [tex]{\rho _{air}}[/tex] in the above equation.

[tex]\begin{aligned}\rho&=4.3\%\times1.2{\text{ kg/}}{{\text{m}}^3}\\&=\frac{{4.3}}{{100}}\times1.2{\text{ kg/}}{{\text{m}}^3}\\&=0.0516{\text{ kg/}}{{\text{m}}^3}\\\end{aligned}[/tex]

Substitute [tex]0.0516{\text{ kg/}}{{\text{m}}^3}[/tex] for [tex]\rho[/tex], [tex]75\text{ kg}[/tex] for [tex]m[/tex], [tex]9.81{\text{ m/}}{{\text{s}}^2}[/tex] for [tex]g[/tex], [tex]0.72{\text{ }}{{\text{m}}^2}[/tex] for [tex]A[/tex] and [tex]0.5[/tex] for [tex]{C_d}[/tex] in equation (1).

[tex]\begin{aligned}{v_t}&=\sqrt{\frac{{2\left({75{\text{ kg}}}\right)\left( {9.81{\text{ m/}}{{\text{s}}^2}} \right)}}{{\left({0.0516{\text{ kg/}}{{\text{m}}^3}}\right)\left({0.72{\text{}}{{\text{m}}^2}} \right)\left( {0.5} \right)}}}\\ &=\sqrt{\frac{{1471.5}}{{0.018576}}}{\text{ m/s}}\\&=\sqrt{79215.116}{\text{ m/s}}\\&=281.452{\text{ m/s}}\\ \end{aligned}[/tex]

Therefore, the terminal speed of the skydiver is [tex]\boxed{281.452{\text{ m/s}}}[/tex].

Learn more:

1. Terminal velocity https://brainly.in/question/6499953

2. Terminal velocity https://brainly.com/question/8789089

3. Net force https://brainly.com/question/11799308

Answer Details:

Grade: High school

Subject: Physics

Chapter: Kinematics

Keywords:

Air, less, dense, higher, elevation, skydivers, reach high, terminal speed, recorded, achieved, jump, height, 39,000 m, density, air, 4.3%, surface density, estimate, sea, level,  , mass, 75 kg, cross section, area,  , 281.452 m/s.