A common characteristic of sound waves is that they

A. Are created by vibrations
B. Travel in straight lines toward the source
C. Travel fastest through empty space
D. Move at the speed of light

Answers

Answer 1
Answer;

A. Are created by vibrations

Explanation;Mechanical waves are waves which travel only through matter and involve the motion  and vibration of particles of the matter they pass through. Sound waves are an example.Sound waves are longitudinal waves. Speed of sound is about 343 m/s (767 mi/h) in sea-level air at ordinary temperatures. Additionally, sound travels faster in liquids and solids than in gases.
Answer 2

A common characteristic of sound waves is that they are created by vibrations. Sound is produced when an object or medium vibrates, causing molecules or particles in the surrounding medium to also vibrate. The correct option is option (A).

A common characteristic of sound waves is that they are created by vibrations. These vibrations are transmitted as mechanical waves through the medium, resulting in the propagation of sound.

Sound waves travel in a variety of directions depending on the source and surrounding conditions, so option (B) is not accurate in general.

Option (C) is incorrect because sound waves require a medium to propagate and cannot travel through empty space, such as a vacuum.

Option (D) is also incorrect because the speed of sound is much slower than the speed of light.

A common characteristic of sound waves is that they are created by vibrations. The correct option is option (A).

To know more about sound waves:

https://brainly.com/question/1554319

#SPJ6


Related Questions

Strength training combined with cardiovascular fitness makes the body stronger and healthier.

True
False

Answers

True. Strength training combined with cardiovascular fitness does make the body stronger and healthier.

Hope this helps. Please mark as brainliest.

The answer is true :)

Sorry took a while to answer

Choose all the answers that apply. Which of the following forces require physical contact?
A. tension
B. air resistance
C. friction
D. magnetic force
E. applied force

CHOOSE ALL THAT APPLY PLEASE!

Answers

Hello!

The answers are:

A. Tension

B. Air resistance

C. Friction

E. Applied force

Why?

Let's discard each given option in order to find what forces requires physical contact:

A. Tension, correct: Tension force appears when it's a force pulling another object, trying to move it in the same direction, the tension usually involves a rope or cable used to pull another object. For example, a mass being held with a rope/cable.

B. Air resistance, correct: Air resistance, or drag, is a force acting in the opposite direction of a body in motion when it's passing through the air, involving contact between the air molecules and the surface of the object. For example, when an airplane is flying, it's being affected by the air resistance, making it move slower.

C. Friction, correct: The friction appears when there is an object surface being in contact with another object surface, both or just one can be in motion, the frictional forces always go in the opposite direction of the motion. For example, when you try to pull a box from a place to another, there is always a force that opposes to the movement, making you to apply more force in order to move the object,  it's the frictional force.

D. Magnetic force, incorrect: Magnetic force does not require physical contact between objects. The magnetic force acts on an object, pulling or attracting it. For example, using a magnet to attract a metallic object does not involve any physical contact, the force acts on the metallic object attracting it with no contact.

E. Applied force, correct: The applied forces involve physical contacts, applying forces on an object can result in the object motion. For example, pushing a button, the button us bein affected by an applied force and it will move in the same direction that the force.

Have a nice day!

Answer:

A. Tension

B. Air resistance

C. Friction

E. Applied force

Explanation:

Which of these best describes the difference between energy and power? A) Power and energy have nothing in common B) Energy and power are the exact same thing. C) Energy has a time component while power does not. D) Power has a time component while energy does not.

Answers

D.Power has a time component while energy does not. This is because power is the RATE at which work is performed.

Uranium-238 undergoes alpha decay. Therefore, uranium-238 will
A. Remain stable
B. Stay the same element
C. Release charged particles and no energy
D. None of the above

Answers

Uranium-238 undergoes alpha decay. Therefore, uranium-238 will  

A. Remain stable  

B. Stay the same element  

C. Release charged particles and no energy  

D. None of the above

The actual answer is that it will change into a different element altogether.

Answer:

D.None of the above.

Explanation:

We are given that uranium-238 undergoes alpha decay.

Therefore, uranium-238 change into into new element of atomic number 2 less and mass number 4 less and releasing an alpha particle  because it undergoes alpha decay

U-238[tex]\rightarrow [/tex]an atome with atomic number 2 less and mass number 4 less+ helium particle with atomic number 2 and mass number 4

Alpha decay: When an element undergoes an alpha decay then it transform into an atom with atomic number 2 less and mass number 4 less due to emission of alpha particle (alpha particle means helium particle which have atomic number 2 and mass number 4)

Therefore, option A is false.

B. It is also false.Because  a new atom is formed and there is no releasing  of charged particle

C.There is no any releasing of charged particle and no energy.Hence, it is false.

Answer :D. None ob the above.

how much chemical energy must be supplied to a car engine if we want it to produce 5000J of kinetic energy and it is 45% efficient

Answers

Here i state the conservation of energy rule and use that to justify my answer. I showed how to manipulate percentages to get the final answer of 11000J (2sf). Hope I'm right xx

11,111.11 J of chemical energy must be supplied to the car engine to produce 5000 J of kinetic energy, given that the engine is 45% efficient.

To find the amount of chemical energy that must be supplied to the car engine to produce 5000 J of kinetic energy, we need to consider the efficiency of the engine.

Efficiency is defined as the ratio of useful output energy to the input energy. In this case, the engine is 45% efficient, which means only 45% of the supplied chemical energy is converted into useful kinetic energy.

Let Echemical be the chemical energy supplied to the engine, and Ekinetic be the kinetic energy produced.

Efficiency (η) = (Useful output energy / Input energy) * 100%

η = (Ekinetic / Echemical) * 100%

Given:

Ekinetic = 5000 J

Efficiency (η) = 45% = 0.45 (in decimal form)

Now, we can rearrange the equation to solve for Echemical:

Echemical = Ekinetic / η

Echemical = 5000 J / 0.45

Echemical ≈ 11111.11 J

Hence, approximately 11,111.11 J of chemical energy must be supplied to the car engine to produce 5000 J of kinetic energy, given that the engine is 45% efficient.

To know more about chemical energy here

https://brainly.com/question/30288262

#SPJ2

Please select the word from the list that best fits the definition most destructive kind of mass movement

Answers

There is no list but I would say a landslide.

The most destructive kind of mass movement a landslide.

What is mass movement?why landslide definition most destructive kind of mass movement?Mass movements are downhill events that transport sediment and other debris, and there are four types of mass movement that have varying degrees of destructiveness. They are landslides, flows, slumps, and creep.The four types of mass movement include landslides, slump, creep, and mudflows. Landslides occur when masses of soil and rocks move down a steep slope.The most destructive type of mass movement is a landslide, which occurs when rock and soil slide quickly down a steep slope. Some landslides may contain huge masses of rock, while others may contain only a small amount of rock and soil.

Landslide is the most destructive kind of mass movement.

To learn more about Landslide and mass movement refer:https://brainly.com/question/1909383

#SPJ2

What does the signal word then accomplish in these sentences

Answers

What are the sentences
Picture? I can help!

What are the characteristics of an ideal transformer ​

Answers

It is an imaginary transformer which has no core loss, no ohmic resistance and no leakage flux. The ideal transformer has the following important characteristic. The resistance of their primary and secondary winding becomes zero. The core of the ideal transformer has infinite permeability.

An ideal transformer is a theoretical device with 100% efficiency, no energy losses, and follows the principle of power conservation. The voltage ratio across the coils is equal to the ratio of their turns. This idealized model helps in understanding transformer behavior without considering real-world inefficiencies.

An ideal transformer is a theoretical device used to model the behavior of real transformers without considering energy losses. Here are the main characteristics of an ideal transformer:

Efficiency: An ideal transformer has 100% efficiency, meaning it does not dissipate power. The power supplied to the primary winding equals the power delivered to the secondary winding.No Energy Losses: There are no losses due to ohmic heating, hysteresis, or eddy currents. The core is assumed to contain all magnetic field lines.Turn Ratios: The voltage ratio between the primary and secondary windings is directly proportional to the ratio of the number of turns on each winding. This is described by V₁/V₂ = N₁/N₂.Power Conservation: The product of current and voltage on the primary side equals the product of current and voltage on the secondary side (V₁ × I₁ = V₂ × I₂).

An ideal transformer is thus an efficient, lossless device that perfectly transfers energy between two circuits through magnetic induction.

how much work is done using a 500 W microwave for 5 minutes

Answers

Answer:

[tex]1.5\cdot 10^5 J[/tex]

Explanation:

The power used by an object is defined as:

[tex]P=\frac{W}{t}[/tex]

where

W is the amount of work done by the object

t is the time taken

In this problem, we have:

P = 500 W is the power of the microwave

[tex]t=5 min=300 s[/tex] is the time taken

So we can solve the formula for W, the work done by the microwave:

[tex]W=Pt=(500 W)(300 s)=1.5\cdot 10^5 J[/tex]

A(n)is produced around a wire when an electrical current is in the wire.

Answers

Answer: The correct answer is "magnetic field".

Explanation:

A magnetic field is produced around the current carrying wire.

If you bring compass needle around the current carrying wire then it shows the deflection which indicates that there is a magnetic  field around the current carrying wire.

Magnetic fields are the area around the surrounding of magnet in which magnetic force can be experienced.

Therefore, a magnetic field is produced around a wire when an electrical current is in the wire.

magnetic field took the test

a basketball player can leap upward .65m how long does the basketball player remain in the air use 9.81m/s²​

Answers

At the player's maximum height, their velocity is 0. Recall that

[tex]{v_f}^2-{v_i}^2=2a\Delta y[/tex]

which tells us the player's initial velocity [tex]v_i[/tex] is

[tex]0^2-{v_i}^2=-2g(0.65\,\mathrm m)\implies v_i=3.6\dfrac{\rm m}{\rm s}[/tex]

The player's height at time [tex]t[/tex] is given by

[tex]y=v_it-\dfrac g2t^2[/tex]

so we find their airtime to be

[tex]0.65\,\mathrm m=\left(3.6\dfrac{\rm m}{\rm s}\right)t-\dfrac g2t^2\implies t=0.36\,\mathrm s[/tex]

1kg of gold will have seven times the volume of 1kg of aluminium? True/False

Answers

false 99.8% sure i looked it up so i believe thats it

Final answer:

The statement is false. For a fixed mass, gold, which is denser than aluminium, will have a smaller volume.

Explanation:

The statement that 1kg of gold will have seven times the volume of 1kg of aluminium is false. The volume of a material is derived from its mass and its density. Specifically, volume equals mass divided by density. The density of gold is about 19.3 g/cm³ while the density of aluminium is about 2.7 g/cm³. Hence, for a given mass, gold will have a smaller volume than aluminium. The intuitive reason for this is that gold is denser than aluminium - it has more mass packed into the same volume.

Learn more about Density here:

https://brainly.com/question/29775886

#SPJ3

The quality or condition of being intense:
A)Electricity
B)Potential Energy
C)Measurement
D)Intensity

Answers

d

please give me brainlest

I think that the answer is D, not sure though

tell me if I'm wrong please.

A candle is placed 40cm in front of a convex mirror with a focal length of 20cm, as shown on the diagram. What is the distance from the lens to the image?

Answers

-40 is the correct answer

two charges attract each other with a force of 1.2 * 10⁻⁶N. Calculate the force that would act between the two charges when distance is doubled, halved, trebled.

Answers

1. When the distance is doubled: [tex]3\cdot 10^{-7}N[/tex]

The electrostatic force between two charges is given by:

[tex]F=k\frac{q_1 q_2}{r^2}[/tex]

where

k is the Coulomb's constant

q1 and q2 are the two charges

r is the distance between the two charges

The initial force between the two charges is [tex]F=1.2\cdot 10^{-6}N[/tex]. In this part of the problem, the distance between the two charges is doubled, so we can write

[tex]r'=2r[/tex]

And substituting into the formula, we find the new force:

[tex]F'=k\frac{q_1 q_2}{r'^2}=k\frac{q_1 q_2}{(2r)^2}=\frac{1}{4}k\frac{q_1 q_2}{r^2}=\frac{F}{4}[/tex]

So, the force is reduced to 1/4 of its original value. Therefore, it is

[tex]F'=\frac{1.2\cdot 10^{-6} N}{4}=3\cdot 10^{-7}N[/tex]

2. When the distance is halved: [tex]4.8\cdot 10^{-6}N[/tex]

The initial force between the two charges is [tex]F=1.2\cdot 10^{-6}N[/tex]. In this part of the problem, the distance between the two charges is halved, so we can write

[tex]r'=r/2[/tex]

And substituting into the formula, we find the new force:

[tex]F'=k\frac{q_1 q_2}{r'^2}=k\frac{q_1 q_2}{(r/2)^2}=4k\frac{q_1 q_2}{r^2}=4F[/tex]

So, the force is quadrupled. Therefore, it is

[tex]F'=4(1.2\cdot 10^{-6} N)=4.8\cdot 10^{-6}N[/tex]

3. When the distance is tripled: [tex]1.33\cdot 10^{-7}N[/tex]

The initial force between the two charges is [tex]F=1.2\cdot 10^{-6}N[/tex]. In this part of the problem, the distance between the two charges is tripled, so we can write

[tex]r'=3r[/tex]

And substituting into the formula, we find the new force:

[tex]F'=k\frac{q_1 q_2}{r'^2}=k\frac{q_1 q_2}{(3r)^2}=\frac{1}{9}k\frac{q_1 q_2}{r^2}=\frac{F}{9}[/tex]

So, the force is reduced to 1/9 of its original value. Therefore, it is

[tex]F'=\frac{1.2\cdot 10^{-6} N}{9}=1.33\cdot 10^{-7}N[/tex]

ANSWER ASAP FOR 40 POINTS


The Doppler effect is the result of a ____ sound source that causes the sound to appear higher or lower than its true ____. As a sound source approaches an observer, the distance between each ____ in the wave is ____. This causes a ____ perceived pitch. As a source moves away from an observer, the distance between each crest in the wave is ____. This causes a ____ perceived pitch. The size of the pitch ____ is determined by the speed of the source relative to the speed of ____.

Word Bank

higher
shift
increased
moving
lower
pitch
sound
crest
shortened

Answers

Put in this order

higher  2

shift  1

increased  5

moving  9

lower  3

pitch  4

sound  7

crest  6

shortened 8

Hope I got it right :P

1. increased

2.pitch

3.sound

4.shortned

5.lower

6.moving

In the following diagram, the voltage is 1.5 volts and the resistance is 7.5 ohms. Use Ohm's law to determine the current in the circuit.



11.3 amps
5.0 amps
6.0 amps
0.2 amps

Answers

I=V/R

I=1.5/7.5

I=0.2

The answer is 0.2

Answer:

Current in the circuit, I = 0.2 amps

Explanation:

It is given that,

Voltage of the circuit, V = 1.5 volts

Resistance, R = 7.5 ohms

According to Ohm's law, the voltage is equal to the product of current and the resistance.

i.e. [tex]I=\dfrac{V}{R}[/tex]

V is the voltage across the circuit

R is the resistance in the circuit

[tex]I=\dfrac{1.5\ V}{7.5\ \Omega}[/tex]

I = 0.2 amps

Hence, the correct option is (d).

Fill in the appropriate values for each blank as it refers to ATOM 1. The number of protons present in ATOM 1 is _________.​

Answers

3, protons are positive and there are 3 positive atoms visible

On a standing wave on a string, the minimum number of nodes is 1 and antinodes is 2. True or false?

Answers

The statement is False

Final answer:

The statement is false; the minimum number of nodes on a standing wave on a string is 2 (at the fixed ends), and the minimum number of antinodes is 1, seen in the fundamental frequency or first harmonic.

Explanation:

The statement that 'on a standing wave on a string, the minimum number of nodes is 1 and antinodes is 2' is false. On a standing wave on a string that is fixed at both ends, the minimal standing wave pattern would include two nodes and one antinode. This is seen in the fundamental frequency (first harmonic), where the wave has a single antinode in the center of the string and a node at each fixed end. Nodes are points of no motion in standing waves, while an antinode is the location of maximum amplitude of a standing wave.

At what point is its PE a maximum? 1. midway between the highest and lowest points 2. at the highest point 3. at the lowest point 4. The PE does not change.

Answers

Answer:

2. at the highest point

Explanation:

For a generic object, the PE (gravitational potential energy) is defined as

PE = mgh

where

m is the mass of the object

g is the gravitational acceleration

h is the height of the object with respect to the ground

From the formula, we see that PE is maximum when h is maximum: so the PE is maximum when the object is at the highest point.

in order for production to take place, the question of what is to be produced must be answered. which of the following is another question that must be answered in order for production to take place?

Answers

How is production to be organized? is the correct answer on APEX.

Answer:how is production to be organised

Explanation:

Use the periodic table from the lesson to answer the following question. The atomic mass of F is ___. 9 10 19 55

Answers

18.9 but round it and you get 19

What is the atomic mass of the element F?A. 9B. 10C. 19D. 55Answer

In this case if given those choices your answer would be (C. 19).

However in more complicated Chemistry rules you would learn that the periodic table only showcases 1 of the many possible masses of the element.

Hope this help! :D  

What is the magnetic flux, in units of mWb (milliWeber), in a cross sectional area of 0.074 m^2 when the magnetic flux density of 0.92 T passes through the area at an angle of 52 degrees?

Answers

Answer:

54 mWb

Explanation:

The magnetic flux linkage through the coil is given by:

[tex]\Phi = BA sin \theta[/tex]

where

B is the magnetic field strength

A is the cross sectional area

[tex]\theta[/tex] is the angle between the direction of the field and the normal to the coil

In this problem:

B = 0.92 T

A = 0.074 m^2

[tex]\theta=52^{\circ}[/tex]

Therefore, the magnetic flux linkage is

[tex]\Phi = (0.92 T)(0.074 m^2) sin 52^{\circ}=0.054 Wb=54 mWb[/tex]

friction is a force
a. that helps two objects move faster when they are touching.
b. that operates against motion when two objects are touching.
c. that gets stronger when two objects move away from each other.
d. that exists between any two objects in the universe.
NEED ASAP!!

Answers

Answer:

The answer is B

That operates against motion when two objects are touching

Explanation:

Friction is a force that operates against motion when two objects or surfaces are touching. Friction is applied in the direction that is opposite the direction of motion.

Friction is a force that operates against motion when two objects are touching. So, option b is correct.

What is meant by friction ?

Friction is defined as the opposing force exerted by the surface when an object moves on it.

Here,

Friction is a resistive force that opposes relative motion between two surfaces. It is exerted by the surface on an object that is moving on it, which is in contact with the surface. So, frictional force is a contact force. It prevents sliding or rolling of an object on a surface in contact. It acts against the motion or the applied force. The object can move only if the applied force on the object overcomes the frictional force exerted by the surface. Frictional force is of various types.

Friction can also act on stationary object.

Friction causes wear and tear to the parts of machines.

Friction is known as resistive force because it always acts against the motion when there is a relative motion between surfaces.

Hence,

Friction is a force that operates against motion when two objects are touching. So, option b is correct.

To learn more about friction, click:

https://brainly.com/question/28356847

#SPJ2

Which of the following is the best example of kinetic energy?

A book sitting on a bookshelf
A golfer preparing to putt the ball
A race car in position at the start line
A satellite orbiting the Earth

Answers

Answer:

A satellite orbiting the Earth

Explanation:

Kinetic energy is the intrinsic energy possessed by an object in motion.  The bigger the object in motion, and the higher its speed , the higher the kinetic energy. The equation below is used to calculate this energy also referred to as the work put into the object to accelerate it into its current velocity.

E(k) = 1/2 * m * v²

Final answer:

The best example of kinetic energy in the options provided is 'A satellite orbiting the Earth'. Kinetic energy specifically refers to the energy possessed by an object in motion, such as a satellite that is constantly moving in its orbit around the Earth.

Explanation:

The best example of kinetic energy among the given options is: 'A satellite orbiting the Earth'. Kinetic energy is the energy of motion. Therefore, any object in motion possesses kinetic energy. The satellite orbiting the Earth is in constant motion; thus, it has kinetic energy. The other examples like a book sitting on a bookshelf, a golfer preparing to putt the ball, and a race car in position at the start line are instances of potential energy or energy that is stored and has the capability to do work but isn't actively doing so.

Learn more about Kinetic Energy here:

https://brainly.com/question/26472013

#SPJ3

Products must equal which in a chemical reaction?

Reactants
atoms
elements
molecules

Answers

I think it is reactants

Products must equal reactants in a chemical reaction. This is known as the law of conservation of mass.

What is a chemical reaction?

In a chemical reaction, one or more reactants (also known as reactants) are changed into one or more products (also known as products).

If there are the same number of atoms of various elements on either side of the equation, then the total atomic mass on the products side will be equal to the reactants side.

This should happen according to the law of conservation of mass in chemical reactions.

This means that during a chemical reaction, no atoms are created or destroyed. They are merely rearranged to form new molecules. This is why chemical equations must be balanced, or have the same number of atoms of each element on both sides of the equation.

By balancing the equation, we ensure that the law of conservation of mass is obeyed and that the products equal the reactants in terms of the number and type of atoms and molecules involved.

Learn more about the chemical reactions here:

https://brainly.com/question/29039149

#SPJ6

Which letter indicates the amplitude of the wave?

a. A

b. B

c. C

d. D


is it b?

Answers

the correct answer A                                                  

Hello, the answer is d. A

Best regards

Two shirts are removed from a dryer and attract each other with a force of 0.5N while they are separated by 1 cm. If the two shirts are equally charged, what would their charge and the force be if they are separated by 4 cm?

Answers

1) Charge: [tex]7.5\cdot 10^{-8} C[/tex]

Explanation:

The electrostatic force between the two shirts is:

[tex]F=k\frac{q_1 q_2}{r^2}[/tex]

where

k is the Coulomb's constant

q1 = q2 = q is the charge of each shirt (they are equally charged)

r = 4 cm = 0.04 m is the distance between the shirts

F = 0.5 N is the force

Re-arranging the equation, we can find q, the charge of each shirt:

[tex]q=\sqrt{\frac{Fr^2}{k}}=\sqrt{\frac{(0.5 N)(0.01 m)^2}{9\cdot 10^9}}=7.5\cdot 10^{-8} C[/tex]

2) Force if they are separated by 4 cm: 0.03 N

In this case, the force between the two shirts would be:

[tex]F=k\frac{q_1 q_2}{r^2}=(9\cdot 10^9)\frac{(7.5\cdot 10^{-8}C)^2}{(0.04 m)^2}=0.03 N[/tex]

Answer:

C. 7.4E-6C, 0.03 N

Explanation:

How is the movement of molecules that you observed in both the cases connected to their mass and temperature?

Answers

Answer:

As the temperature increases, the kinetic energy of the molecules of the liquid increases.

Explanation:

As the temperature increases, the kinetic energy of the molecules of the liquid increases.

The distance between a proton and an electron is cut in half. How does the force of attraction change? A) The force becomes twice as much. B) The force becomes one-half as much. C) The force becomes four times as much. D) The force becomes one-quarter as much.

Answers

Answer: The force becomes four times as much

The electric force is a force that is inversely proportional to the square of the distance. This can be proved by Coulomb's Law, which states:

"The electrostatic force [tex]F_{E}[/tex] between two point charges [tex]q_{1}[/tex] and [tex]q_{2}[/tex] is proportional to the product of the charges and inversely proportional to the square of the distance [tex]d[/tex] that separates them, and has the direction of the line that joins them"

Mathematically this law is written as:

[tex]F_{E}= K\frac{q_{1}.q_{2}}{d^{2}}[/tex]    (1)

Where [tex]K[/tex] is a proportionality constant.

Now, if we say [tex]q_{1}[/tex] is the proton and [tex]q_{2}[/tex] is the electron, and cut the distance between them in half, the new distance will be [tex]\frac{d}{2}[/tex].

Substituting this new distance in equation (1):

[tex]F_{E}= K\frac{q_{1}.q_{2}}{(\frac{d}{2})^{2}}[/tex]   (2)

[tex]F_{E}= 4K\frac{q_{1}.q_{2}}{d^{2}}[/tex]     (3)>>>As we can see, the force becomes four times stronger

Answer:

The Answer Is C

Explanation:

Other Questions
Can someone please help thanks Find the equation of the line that is perpendicular to the line y = 4 and passes through the point (2, 1). A)x = 2 B)y = 1 C)y = 1 D)x = 2 What was the link between the policy of containment and the United State's involvement in Korea and Vietnam? What is measure of angle A?Enter your answer as a decimal in the box. Round only your final answer to the nearest hundredth. In which country did the first Industrial Revolution begin?United StatesFranceBritainGermany Arrange the steps of the decision-making process to solve a problem in the correct order.Generating alternativesEvaluating the resultsIdentifying the problemEvaluating the consequencesImplementing the solutionChoosing an alternative or solution Please select the word from the list that best fits the definition a gas made up of three oxygen molecules bonded together that occurs naturally in the upper atmosphere Graph the system of equations {3x+y=6 -3x-4y=12 Which increases speciation A. No predators B. Asexual reproduction C. Geographic isolation D. Lack of mutations To introduce important facts, some writers begin with a ______ phrase. Which is an example of internal conflict? Kevin is going to a dance with Katie, but on the way to her house he gets a flat tire. Kevin wants to take Katie to a dance, but his best friend Jason has already told Lauren and Ashley that he and Kevin would take them. Kevin asks Katie to go with him to a dance, but she refuses, saying she would rather go with Adam. When Kevin and Katie go to the dance, who should show up but Thomas, the prom king, who hangs around and keeps cutting in. What form the ideal gas law would you use to calculate the temperature of a gas please answer with steps!! anyone of the questions in the photo worth 20 points What is the area of this triangle?Round to the nearest hundredth. the opposite of rapidamente is ________.A) inmediatamenteB) felizmenteC) lentamenteD) solamente What is the BEST word to describe the probability that the spinner will stop on 3 or 4? A) certain B) unlikely C) impossible D) very likely ANSWERthe answer is C.. What was one major consequence of russia's victories against austriahungary on world war I's eastern front Out of 54 randomly chosen football players in a football league, 11 said they were going to attend camp there are 810 players in the entire leagueHow many players in the league would you expect to attend camp?A 54B 437 C 165D 20 The process by wich a solid changes to a liquid is According to Sartre, which of the following terms refers to the experience of God's nonexistence and the repercussions of the knowledge that we alone are totally responsible for our choices?anguishdespairforlornnessquietism Steam Workshop Downloader