Answer:
The amount of inventory that would be reported on the absorption costing balance sheet is $70,905
Explanation:
In order to Calculate the amount of inventory under absorption Costing to be reported on the balance sheet, we would have to use the following formula:
amount of inventory under absorption Costing = (Direct materials+Direct labor+Variable factory overhead+ Fixed factory overhead)/ (Production costs units)×units remain unsold
amount of inventory under absorption Costing =($761,300/20,400)×1,900
amount of inventory under absorption Costing = $70,905
The amount of inventory that would be reported on the absorption costing balance sheet is $70,905
Vaughn, Inc. has 2400 shares of 4%, $50 par value, cumulative preferred stock and 48000 shares of $1 par value common stock outstanding at December 31, 2019, and December 31, 2018. The board of directors declared and paid a $3800 dividend in 2019. In 2020, $17400 of dividends are declared and paid. What are the dividends received by the preferred and common shareholders in 2020
Answer: Preferred Shareholders will receive $5,800 and Common Shareholders will receive $11,400 in dividends.
Explanation:
With Cumulative Preferred Shares, their dividends must always be paid and if they cannot be paid, they are accrued until such a time as they can be paid.
Vaughn, Inc. has 2400 shares of 4%, $50 par value, cumulative preferred stock which means that the dividends due on them are,
= 2,400 * 50 * 4%
= $4,800
The board of directors declared and paid a $3,800 dividend in 2019 which is $1,000 less than the total amount of dividends to be paid to the preferred shareholders.
That means that the entire $3,800 in 2019 went to Preferred Shareholders and they are infact still owed $1,000.
In 2020 therefore their dividend payment should be,
= 4,800 + 1,000
= $5,800
Common Shareholders will receive,
= 17,400 - 5,800
= $11,600
Preferred Shareholders will receive $5,800 and Common Shareholders will receive $11,400 in dividends in 2020.
On December 31, 2021, when its Allowance for Doubtful Accounts had a debit balance of $1,534, Indigo Corporation estimates that 8% of its accounts receivable balance of $74,100 will become uncollectible and records the necessary adjustment to Allowance for Doubtful Accounts. On May 11, 2022, Indigo Corporation determined that B. Jared’s account was uncollectible and wrote off $1,171. On June 12, 2022, Jared paid the amount previously written off. Prepare the journal entries on December 31, 2021, May 11, 2022, and June 12, 2022.
Answer and Explanation:
The Journal Entry is shown below:-
1. Bad debts expense Dr, $7,462
To Allowance for doubtful accounts $7,462
($74,100 × 8%) + $1,534
(Being bad debts expense is recorded)
2. Allowance for doubtful account Dr, $1,171
To Accounts receivable $1,171
(Being allowance for doubtful account is recorded)
3. Accounts receivable Dr, $1,171
To Allowance for doubtful accounts $1,171
(Being accounts receivable is recorded)
Cash account Dr, $1,171
To Accounts receivable $1,171
(Being cash is recorded)
A series of journal entries are recorded by Indigo Corporation in regards to their Allowance for Doubtful Accounts and specific customer accounts. These entries account for anticipated losses, specific account write-offs, and subsequent recovering of written off amounts.
Explanation:On December 31, 2021, Indigo Corporation predicts that 8% of its accounts receivable balance will become uncollectible, this would be $5,928 (8% of $74,100). The Allowance for Doubtful Accounts originally had a debit balance of $1,534, this should be subtracted from the estimated uncollectible amount. Therefore the adjustment to the allowance for doubtful accounts is a credit of $7,462 ($5,928 plus $1,534). The journal entry would be:
Debit: Bad Debt Expense $7,462
Credit: Allowance for Doubtful Accounts $7,462
On May 11, 2022, B. Jared’s account was identified as uncollectible and so written off. The company recorded a debit to the Allowance for Doubtful Accounts and a credit to Accounts Receivable for the $1,171. The journal entry would be:
Debit: Allowance for Doubtful Accounts $1,171
Credit: Accounts Receivable $1,171
Subsequently on June 12, 2022, Jared repaid the amount that had been written off. Indigo Corporation would record a debit to Accounts Receivable and a credit to Allowance for Doubtful Accounts for the $1,171. Afterwards, when the cash was received, they recorded a debit to Cash and a credit to Accounts Receivable for $1,171. The journal entries would be:
Debit: Accounts Receivable $1,171
Credit: Allowance for Doubtful Accounts $1,171
And
Debit: Cash $1,171
Credit: Accounts Receivable $1,171
Learn more about journal entries here:https://brainly.com/question/33762471
#SPJ3
At December 31, Folgeys Coffee Company reports the following results for its calendar year.
Cash sales $905,000
Credit sales 305,000
Its year-end unadjusted trial balance includes the following items.
Accounts receivable $130,000 debit
Allowance for doubtful accounts 5,500 debit
Prepare the adjusting entry to record bad debts expense assuming uncollectibles are estimated to be (1) 4% of credit sales, (2) 2% of total sales, and (3) 7% of year-end accounts receivable.
Answer and Explanation:
As per the data given in the question,
a) Bad debts expense A/c Dr. $12,200 ($305,000 × 4%)
To Allowance for doubtful accounts A/c $12,200
(Being bad debt expense of 4% credit sales is recorded)
b) Bad debts expense A/c Dr. $24,200 (($905,000 + 305,000) × 2%)
To Allowance for doubtful accounts A/c $24,200
(Being bad debt expense of 2% credit sales is recorded)
c) Bad debts expense A/c Dr. $14,600 (($130,000 × 7%) + $5,500)
To Allowance for doubtful accounts A/c $14,600
(Being bad debt expense of 7% of year-end accounts receivable is recorded)
Ritchie Manufacturing Company makes a product that it sells for $200 per unit. The company incurs variable manufacturing costs of $110 per unit. Variable selling expenses are $20 per unit, annual fixed manufacturing costs are $466,000, and fixed selling and administrative costs are $269,000 per year.
Required:
Determine the break-even point in units and dollars using each of the following approaches:
a. Use the equation method.
b. Use the contribution margin per unit approach.
c. Use the contribution margin ratio approach.
d. Prepare a contribution margin income statement for the break-even sales volume.
Answer :
Break even units = 10,500
Break even amount = $2,100,000
Explanation :
As per the data given in the question,
a) Break even units = Fixed expense ÷ CM per unit b ÷ (a - c)
= ($466,000 + $269,000) ÷ ($200 - $110 - $20)
= 10,500 units
b) Break even amount = b ÷ (a ÷ c)
= ($466,000 + $269,000) ÷ ($70 ÷ $200)
= $2,100,000
Contribution margin ratio = Contribution margin ÷ Selling price per unit × 100
where,
Contribution margin = Selling price per unit - variable expenses per unit
c) CM per unit Break even units = Fixed expense ÷ Cm per unit
= $735,000 ÷ $70
= 10,500 units
Break even dollars = Fixed expense ÷ Contribution margin ratio
= $735,000 ÷ 0.35
= $2,100,000
d) Contribution margin income statement:
Sales = 10,500 × $200 = $2,100,000
Less Variable expenses 10,500 × ($110+$20) = $1,365,000
Contribution margin $735,000
Less Fixed Expense $735,000
Net Operating Income = $0
Final answer:
The break-even point for Ritchie Manufacturing Company is 10,500 units or $2,100,000 in revenue. This can be calculated using the equation method, contribution margin per unit, or contribution margin ratio approaches. A contribution margin income statement at the break-even level would show $2,100,000 in sales, with total costs also amounting to $2,100,000, resulting in $0 operating income.
Explanation:
To determine the break-even point in units and dollars for Ritchie Manufacturing Company, we can use the following information: selling price per unit is $200, variable costs per unit are $110 (manufacturing) + $20 (selling), fixed manufacturing costs are $466,000, and fixed selling and administrative costs are $269,000.
a. Equation method: The break-even point in units (Q) is found by solving the equation for Q in $200Q = $110Q + $20Q + $466,000 + $269,000. Simplifying this, we get $200Q = $130Q + $735,000, which gives us Q = $735,000 / ($200 - $130) = $735,000 / $70 = 10,500 units. The break-even point in dollars is therefore 10,500 units * $200/unit = $2,100,000.
b. Contribution margin per unit approach: The contribution margin per unit is $200 (selling price) - $110 (variable manufacturing cost) - $20 (variable selling expense) = $70. Therefore, the break-even point in units is the total fixed costs divided by the contribution margin per unit, which is ($466,000 + $269,000) / $70 = $735,000 / $70 = 10,500 units. To find the break-even point in dollars, multiply the units by the selling price: 10,500 units * $200 = $2,100,000.
c. Contribution margin ratio approach: The contribution margin ratio is the contribution margin per unit divided by the selling price per unit, which is $70 / $200 = 0.35, or 35%. The break-even point in dollars can be found by dividing the total fixed costs by the contribution margin ratio $735,000 / 0.35 = $2,100,000.
d. Contribution margin income statement: At the break-even sales volume of 10,500 units, the contribution margin income statement would show $2,100,000 in sales, $1,155,000 in variable costs ($110 manufacturing + $20 selling, multiplied by 10,500 units), resulting in a contribution margin of $945,000, which exactly covers the fixed costs of $735,000 ($466,000 manufacturing + $269,000 administrative), leading to an operating income of $0.
Part 5: Joint Product Costs (10 points) Iaci Company makes two products from a common input. Joint processing costs up to the split-off point total $42,000 a year. The company allocates these costs to the joint products on the basis of their total sales values at the split-off point. Each product may be sold at the split-off point or processed further. Data concerning these products appear below: Required: What is the net monetary advantage (disadvantage) of processing Product X beyond the split-off point
Question
Iaci Company makes two products from a common input. Joint processing costs up to the split-off point total $42,000 a year. The company allocates these costs to the joint products on the basis of their total sales values at the split-off point. Each product may be sold at the split-off point or processed further. Data concerning these products appear below: Product X Product Y Total Allocated joint processing costs $22,400 $19,600 $42,000 Sales value at split-off point $32,000 $28,000 $60,000 Costs of further processing $11,600 $25,300 $36,900 Sales value after further processing $44,800 $53,200 $98,000 Required: (a) What is the net monetary advantage (disadvantage) of processing Product X beyond the split-off point?
Answer:
Net monetary advantage = $11,200
Explanation:
Sales
A company should process further a product if the additional revenue from the split-off point is greater than than the further processing cost.
Also note that all costs incurred up to the split-off point are irrelevant to the decision to process further .
We can apply this principle to the question as follows:
$
Sales revenue after the split-off point 44,800
Sales revenue at the split-off point (32,000)
Additional sales revenue 12,800
Further processing cost (11,600)
Increase in Net income 11,200
Net monetary advantage = $11,200
Kindly note that the allocated joint cost of 22, 400 to product X is a sunk cost. This implies whether or not the Product X is processed further the sunk cost is irrelevant to the decision
he government of Junta took Fuel Safe Corp., a domestic energy firm, into state ownership to save the company from bankruptcy. However, the other private competitors in the energy industry were enraged by this decision. As a result, the government had to reduce the tax burden on all private energy firms so that both the state-owned enterprise and private firms could coexist. What type of economy does this portray?
Answer: Mixed economy
Explanation:
A mixed economic system is a form of economic system that combines private and state enterprise. A mixed economic system combines aspects of capitalism and socialism. A mixed economic system safeguards private property, allows a level of economic freedom during the usage of capital, and also allows governments to interfere in the economic activities so as to achieve social aims.
The example in the question shows that the private and public sector are playing a role in the economy and hence, it's a mixed economy.
A leverage effect will occur if: a. fixed operating costs are greater than zero or if interest expense is less than zero b. fixed operating costs are greater than zero or if interest expense is greater than zero c. fixed operating costs are less than zero or if interest expense is greater than zero d. fixed operating costs are less than zero or if interest expense is less than zero
Answer:
B. fixed operating costs are greater than zero or if interest expense is greater than zero
Explanation: The "leverage effect" refers to the well-established relationship between stock returns and both implied and realized volatility: volatility increases when the stock price falls.
The leverage effect explains a company's Return on Equity in terms of its Return on Capital employed and Cost of debt. The leverage effect is the difference between Return on Equity and Return on Capital employed.
Leverage refers to the debt that is the borrows funds. Yet are made to enhance returns from an investment or a project. Companies use leverage to finance their assets. Such as issuing stocks or rising capital.
Leverage can take place if the company has a fixed stock that must be met with the sales volume. As leverage can increase the volatility of the stock. Increasing the levels of risks can in turn increase the returns.Hence the option b is correct.
Learn more about the leverage effect that will occur.
https://brainly.com/question/23611168.
Clancy's Motors has the following demand to meet for custom manufactured fuel injector parts. The holding cost for that item is $0.75 per month and each setup costs $150. Lead-time is 0 months. Calculate the planned order releases using: (a) the EOQ technique, and (b) the POQ technique, (c) the lot-for-lot technique. What are the costs of each plan, including the holding cost of any inventory left over after month 7? Show POM-QM results.
Answer:
a) EOQ ≈ 250
b) POQ = 1.59 ≈ 2 months
c) Cost of EOQ = 1275 USD
Cost of POQ = 937.5 USD
Explanation:
Again, the essential data is not provided in this question but I have found this question on internet and I will share the required data here in this solution:
a) EOQ = Economic Order Quantity:
FIrst of all, we have to calculate EOQ and for that we have following formula:
Holding Cost = 0.75
Setup Cost = 150
So, here's the required data which is missing in the question:
Month 1 2 3 4 5 6 7
Requirement 100 150 200 150 100 150 250
Now, we are good to go:
So, from the above data we will calculate the Demand:
Demand (D) = Sum of requirement / Total Time Period
D = 100 + 150 + 200 + 150 + 100 + 150 + 250/ 7
D = 157.14
Formula for EOQ:
EOQ = [tex]\sqrt{\frac{2SD}{H} }[/tex]
S = Setup Cost = 150
D= Demand = 157.14
H = Holding Cost = 0.75
Let's plug in the values:
EOQ = [tex]\sqrt{\frac{2*150*157.14}{0.75} }[/tex]
EOQ = 250.71
EOQ ≈ 250
So, the economic order quantity for the above given data is 250 units.
b) POQ = Periodic Order Quantity
Periodic Order Quantity = Economic Order Quantity/ Demand
POQ = 250/157.14
POQ = 1.59 ≈ 2 months
Now, as we have both POQ and EOQ at hand. Next step is to calculate the cost of each plan as mentioned in the question. For which we need MRP of each plan.
1. Cost of Economic Order Quantity:
First of all let me write down the MRP = Materials Requirement Planning Data for EOQ:
Requirement 100 150 200 150 100 150 250
Available 0 150 0 50 150 50 150
Ordered 250 0 250 250 0 250 250
End Inventory 150 0 50 150 50 150 150 700
Now, Let's Calculate the Cost of EOQ:
Setup Cost = Number of Orders x Setup Cost Given
Setup Cost = 5 x 150
Setup Cost = 750 USD
Holding Cost = Holding Cost per item given x Number of Inventory held
Holding Cost = 0.75 x 700
Holding Cost = 525 USD
Now, Calculate the Total Cost of EOQ:
Total Cost of EOQ = Setup Cost + Holding Cost
Total Cost of EOQ = 750 + 525
Totol Cost of EOQ = 1275 USD
2. Cost of POQ:
Similarly, we have to calculate the Cost of POQ. For that, we need MRP of POQ as well:
MRP for POQ:
Requirement 100 150 200 150 100 150 250
Available 0 150 0 150 0 150 0
Ordered 250 0 350 0 250 0 250
End Inventory 150 0 150 0 150 0 0 450
Setup Cost = Number of Orders x Setup Cost Given
Setup Cost = 4 x 150
Setup Cost = 600 USD
Holding Cost = Holding Cost per item given x Number of Inventory held
Holding Cost = 0.75 x 450
Holding Cost = 337.5 USD
Total Cost of EOQ = Setup Cost + Holding Cost
Total Cost of EOQ = 600 + 337.5
Totol Cost of EOQ = 937.5 USD
Final answer:
Without detailed demand figures and inventory costs for Clancy's Motors, calculating planned order releases and their associated costs using EOQ, POQ, and lot-for-lot techniques is not possible. However, each technique is explained along with how costs would generally be calculated.
Explanation:
The question asks for the calculation of planned order releases for Clancy's Motors using three techniques: EOQ (Economic Order Quantity), POQ (Periodic Order Quantity), and the lot-for-lot technique, along with the costs associated with each plan, including the holding cost after month 7. However, the specific demand figures, along with other necessary data to perform these calculations directly relevant to Clancy's Motors, are missing. Therefore, a general explanation of each technique and how costs are calculated is provided instead.
EOQ is a formula used to determine the optimal order quantity that minimizes the total inventory costs, including ordering and holding costs. The EOQ model is used when demand is constant over the year and each new order is delivered in full when inventory reaches zero.
POQ is an inventory management policy that orders at fixed intervals and varies the quantity ordered each time. The goal is to match supply closely with predictable demand while minimizing inventory costs.
The lot-for-lot technique orders exactly what is required for the next period, minimizing holding costs but potentially increasing ordering costs if the demand is frequent.
Without specific demand figures or inventory costs directly from Clancy's Motors, a detailed calculation for each method and associated costs cannot be completed. Normally, costs are derived using formulas specific to each technique, factoring in aspects like ordering costs, holding costs, demand rate, and production or purchase cost per unit.
Michael Corporation is evaluating a capital investment opportunity. This project would require an initial investment of $36,000 to purchase equipment. The equipment will have a residual value at the end of its life of $5000. The useful life of the equipment is 4 years. The new project is expected to generate additional net cash inflows of $19,000 per year for each of the four years. Michael's required rate of return is 10%. The net present value of this project is closest to:
Answer:
$27,645
Explanation:
The computation of the net present value is shown below
Net Present value = Present value of cash inflow + Present value of residual value - Initial investment
= $19,000 × 3.170 + $5,000 × 0.683 - $36,000
= $27,645
The 3.170 is the PVIFA factor for 4 years at 10% and the discount factor for 4 year at 10% is 0.683 and we considered the same
Hankins Corporation has 6.1 million shares of common stock outstanding, 314,000 shares of 4.5 percent preferred stock outstanding, par value of $100, and 67,000 5.5 percent semiannual bonds outstanding, par value $2,000 each. The common stock currently sells for $73.80 per share and has a beta of 1.17, the preferred stock currently sells for $105.40 per share, and the bonds have 20 years to maturity and sell for 95.5 percent of par. The market risk premium is 6.5 percent, T-bills are yielding 3.1 percent, and the firm’s tax rate is 22 percent.
What is the firm's market value capital structure?
Answer:
The firm's market value capital structure is $611,245,600.00
Explanation:
Hankins Corporation firm's market value of capital structure is the sum of the market worth of common stock,preferred stock and the debt financing.
The market value of equity is the number of common stock issued and outstanding multiplied by market price per share
The market value of the preferred stock is the number of preferred stock issued multiplied by the market value per unit of preferred stock,same applies to debt(bonds issued)
Market value of equity=6,100,000*$73.80=$ 450,180,000.00
Market of preferred stock=314,000*$105.40=$33,095,600.00
Market value of bonds=67,000*$2000*95.5%=$ 127,970,000.00
Total market value $611,245,600.00
A stock had returns of 21.70% (1 year ago), 2.40% (2 years ago), X (3 years ago), and ‑14.60% (4 years ago) in each of the past 4 years. Over the past 4 years, the geometric average annual return for the stock was 2.85%. Three years ago, inflation was 3.62% and the risk-free rate was 4.47%. What was the real return for the stock 3 years ago?
Answer:
The real return for the stock 3 years ago is 1.47
Explanation:
In order to calculate to calculate the real return for the stock 3 years ago we would have to make first the following calculation Using geometric return:
(1+0.0285) = ((1+0.217)*(1+0.024)*(1+X)*(1-0.146))^(1/4)
X = 5.14%
Therefore, to calculate the real return we have to use the following formula:
Real return = ((1+nominal return)/(1+inflation rate)-1)*100
Real return=((1+0.0514)/(1+0.0362)-1)*100
Real return = 1.47
The real return for the stock 3 years ago is 1.47
Rusty Hardware makes only cash sales. It began 2021 with a credit balance of $33,300 in the refund liability account. Sales during 2021 were $730,000. Rusty estimates that 5% of all sales will be returned. During 2021, customers returned merchandise for credit of $30,600 to their accounts. What is the balance in the refund liability account at the end of 2021?
Answer:
$39,200
Explanation:
Sales return allowance is a contra revenue account. It is deducted from the sales to calculate the net sales value. It is an adjustment account for the returns made by the customers.
Ending Balance of Sales return Allowance = Opening Balance of Allowance + Expected Sales return - Actual Sales sales return
As per given data
Opening Balance = $33,300
expected Return = $730,000 x 5% = $36,500
Actual Return = $30,600
Placing values in the formula
Ending Balance of Sales return Allowance = $33,300 + $36,500 - $30,600 = $39,200
Net income was $469,000. Issued common stock for $80,000 cash. Paid cash dividend of $17,000. Paid $130,000 cash to settle a note payable at its $130,000 maturity value. Paid $116,000 cash to acquire its treasury stock. Purchased equipment for $92,000 cash. Use the above information to determine this company's cash flows from financing activities. (Amounts to be deducted should be indicated with a minus sign.)
Answer:
-$183,000
Explanation:
The cash flow statement categories the company's transactions in a financial period into 3 groups; these are operating, investing and financing.
The net profit/loss, depreciation, changes in current assets (other than cash) and liabilities are considered as operating activities including income taxes.
The sale of assets, interest received, purchase of investments are examples of investing activities while the issuance of stocks, debt principal deduction (loan settlement), issuance of debt securities etc are examples of financing activities.
An increase in assets other than cash is an outflow while an increase in liabilities is an inflow. Depreciation and other non-cash expenses deducted in the income statements are added back while the non-cash income such gain on asset are deducted from net income.
The company's cash flows from financing activities
= $80,000 - $17,000 - $130,000 - $116,000
= -$183,000
Diamond Boot Factory normally sells their specialty boots for $375 a pair. An offer to buy 100 boots for $275 per pair was made by an organization hosting a national event in Norfolk. The variable cost per boot is $250 and special stitching will add another $20 per pair to the cost.
Determine the differential income or loss per pair of boots from selling to the organization.
Answer:
$5
Explanation:
Differential revenue:
Revenue per pair of boots $275
Differential costs:
Variable manufacturing costs $(250)
Additional decoration (20) (270)
Differential profit from accepting special order($275-$270) $5
Therefore the differential income or loss per pair of boots from selling to the organization will be $5 which means Diamond Boot Factory should accept the special order.
Answer:
incremental income of $ 500 will result from the special offer.
Explanation:
Consider the incremental costs and revenues resulting from accepting the special offer.
Sales (100×$275) 27,500
Variable cost (100×$250) (25,000)
Special Stitching (100×$20) (2,000)
Net Income/Loss 500
Therefore an incremental income of $ 500 will result from the special offer.
Check my work Check My Work button is now disabledItem 5Item 5 6 points The aftertax cost of debt: Multiple Choice varies inversely to changes in market interest rates. will generally exceed the cost of equity if the relevant tax rate is zero. will generally equal the cost of preferred if the tax rate is zero. is unaffected by changes in the market rate of interest. is highly dependent upon a company's tax rate.
Answer: is highly dependent upon a company's tax rate.
Explanation:
The after-tax cost of debt is defined as the net cost of debt that is determined by adjusting the gross cost of debt incurred for its tax benefits. The after-tax cost of debt
equals the pre-tax cost of debt which is then multiplied by (1 – tax rate).
The after-tax cost of debt is the cost of debt which is included while calculating the weighted average cost of capital and it has a greater effect on the cost of capital of a firm when there's an increase in the debt-equity ratio.
Company S is shifting to a new culture that focuses on being assertive with its clients and emphasizes company’s policy of prudence to all his new employees. According to Hofstede’s dimensions, Company S has cultural values of _________. a. masculinity and long-term orientation b. uncertainty avoidance and masculinity c. power distance and uncertainty avoidance d. collectivism and power distance
Answer: b. uncertainty avoidance and masculinity
Explanation:
Hofstede’s cultural dimensions is a framework of analysis proposed by Geert Hofstede which speaks on how different cultures communicate in relation to the influence that society has on its members.
There are 6 dimensions but for this question we shall speak on 2.
1. Uncertainty Avoidance
It speaks on the general uneasiness that people in society feel due to Uncertainty. People just don't like to feel uncertain and hate it when they do not know what will happen. Company S wants to pursue a new culture that focuses on Prudence with new employees which means that they will be less uncertain about their roles.
2. Masculinity.
This dimension speaks on the general tendency of society to gravitate towards assertiveness, heroism and achievement. Company S aims to be more Assertive with clients so that new culture would fall under this dimension.
Final answer:
Company S is adopting a culture that values assertiveness and prudence, which aligns with Hofstede’s dimensions of masculinity and uncertainty avoidance.
Explanation:
According to Hofstede’s dimensions of culture, the values of being assertive with clients and emphasizing a policy of prudence suggest that Company S has cultural values of masculinity and uncertainty avoidance. Masculinity in this context refers to a preference in society for achievement, heroism, assertiveness, and material rewards for success. Uncertainty avoidance indicates the degree to which the members of a culture feel threatened by ambiguous or unknown situations and have created beliefs and institutions that try to avoid these. Option B is correct .
Company S's shift to a culture that promotes assertiveness aligns with Hofstede’s masculinity dimension, as it values competitiveness and assertiveness in business dealings. Additionally, the emphasis on prudence implies a strong desire to minimize uncertainty, aligning with the uncertainty avoidance dimension. This reflects a culture that has a lower tolerance for ambiguity and a higher need for formal rules and policies.
Jones Company makes 20,000 units per year of a part it uses in the products it manufactures. The unit product cost of this part is computed as follows: An outside supplier has offered to sell the company all of these parts it needs for $51.80 a unit. If the company accepts this offer, the facilities now being used to make the part could be used to make more units of a product that is in high demand. The additional contribution margin on this other product would be $44,000 per year. If the part were purchased from the outside supplier, all of the direct labor cost of the part would be avoided. However, $5.10 of the fixed manufacturing overhead cost being applied to the part would continue even if the part were purchased from the outside supplier. This fixed manufacturing overhead cost would be applied to the company's remaining products. Required: a. How much of the unit product cost of $56.70 is relevant in the decision of whether to ma
Answer:
$51.60
Explanation:
The computation of the relevant cost per unit is shown below:
= Direct material per unit + direct labor per unit + variable overhead per unit + fixed overhead per unit - applied fixed manufacturing overhead per unit
= $24.70 + $16.30 + $2.30 + $13.40 - $5.10
= $51.60
We simply added the given cost in order to find out the relevant cost per unit
Problem 9-17 Assume that the risk-free rate of interest is 4% and the expected rate of return on the market is 14%. A share of stock sells for $55 today. It will pay a dividend of $6 per share at the end of the year. Its beta is 1.5. What do investors expect the stock to sell for at the end of the year? (Do not round intermediate calculations. Round your answer to 2 decimal places.)
Answer:
The stock price at year end is $59.45
Explanation:
Given that:
risk-free rate of interest ([tex]r_f[/tex])= 4% = 0.04,
expected rate of return on the market[tex]E(r_m)[/tex] = 14% = 0.14
Beta ([tex]\beta[/tex]) = 1.5
Dividends (D) = $6
Current price of stock [tex]P_o[/tex] = $55
Therefore, the expected rate of return ([tex]E(r)[/tex]) is given as:
[tex]E(r) = r_f +\beta (E(r_m)-r_f) = 0.04+1.5(0.14-0.04)=0.04+1.5(0.1)=0.19[/tex]
The price of the stock at the end of the year ([tex]P_1[/tex]) is given as:
[tex]E(r)=\frac{D+P_1-P_o}{P_o} \\0.19=\frac{6+P_1-55}{55} \\10.45=6+P_1-55\\P_1=10.45+55-6=59.45[/tex]
P₁ = $59.45
Final answer:
The expected price of the share at the end of the year, considering the provided risk-free rate of interest, expected market return, dividend payment, and stock beta, is $65.45.
Explanation:
The question revolves around calculating the expected price of a share at the end of the year given certain financial metrics, including the risk-free rate, the expected market return, the dividend to be paid, and the stock's beta. To determine the expected price, we need to factor in the expected return on the stock based on the Capital Asset Pricing Model (CAPM), which is used to estimate the return an investor requires, given the stock's risk compared to the market.
The CAPM formula is: Expected Return = Risk-Free Rate + Beta ×(Market Return - Risk-Free Rate). In this case, it is: Expected Return = 4% + 1.5 ×(14% - 4%) = 4% + 1.5 ×10% = 4% + 15% = 19%.
The expected return includes both the dividend yield and the capital gain. Therefore, we can set up the equation: 19% = ($6 / $55) + (Price Next Year - $55) / $55. Solving for Price Next Year yields: Price Next Year = $55 ×(1 + 19%) - $6 = $65.45.
Consider a product with a daily demand of 400 units, a setup cost per production run of $100, a holding cost per unit of $24.00, and an annual production rate of 292,000 units. The firm operates and experiences demand 365 days per year. a. What is the Production Order Quantity? (Select] b. What is the max inventory on hand? (Select] c. What is the average inventory? (Select] d. What are the total holding costs? $ (Select] e. What does it cost to manage the inventory?
Answer:
a. The Production Order Quantity is 1,560 units
b. The Maximum inventory is 780 units
c. The Average inventory is 390 units
d. The Total holding cost is $9,360
e. To manage the inventory cost $18,718.97
Explanation:
a. According to the given data we have the following:
Annual Production rate = 292,000 units
Daily production rate(p) = Annual production rate / number of days per year = 292,000/365 = 800 units
Demand rate(d) = 400 units per day
Number of days per year = 365
Annual demand(D) = d × number of days per year = 400 × 365 = 146,000 units
Set up cost(S) = $100
Holding cost (H) = $24
Therefore to calculate the Production Order Quantity we have to use the following formula:
production order quantity(Q) = √ {2DS / H [1-(d/p)]}
= √ {(2x146,000x100) /24[1-(400/800)]}
= √ [29,200,000/24(1-0.5) ]
= √ [29,200,000/(24 x 0.5)]
= √ (29,200,000/12)
= √2,433,333.3333
= 1,560 units
b. To calculate the Maximum inventory we use the following formula:
Maximum inventory ( I - max) = (Q/p) (p-d) = (1560/800)(800-400) = 1.95 x 400 = 780 units
c. To calculate the Average inventory we use the following formula:
Average inventory = I-max/2 = 780/2 = 390 units
d. To calculate the Total holding cost we use the following formula:
Total holding cost = [(I-max / 2) H] = (780/2)24 = 390 × 24 = $9,360
e. To calculate What does it cost to manage the inventory we use the following formula:
Total cost = Annual holding cost + Annual setup cost
Annual setup cost = (D/Q) S = (146000/1560)100 = $9,358.97
Therefore, Total cost =$9,360 + $9,358.97
= $18,718.97
Year-to-date, Yum Brands had earned a 4.40 percent return. During the same time period, Raytheon earned 4.93 percent and Coca-Cola earned −0.60 percent.If you have a portfolio made up of 40 percent Yum Brands, 40 percent Raytheon, and 20 percent Coca-Cola, what is your portfolio return?
Answer:
3.612%
Explanation:
The computation of portfolio return is shown below:-
Portfolio return = (Return of Y × Weight of Y) + (Return of R × Weight of R)
+ (Return of C × Weight of C)
= (4.40% × 40%) + (4.93% × 40%) + (-0.60% × 40%)
= 1.76% + 1.972% - 0.12%
= 3.612%
Therefore for computing the portfolio return we simply applied the above formula.
g Pepper Department store allocates its service department expenses to its various operating (sales) departments. The following data is available for its service departments: Expense Basis for allocation Amount Rent Square feet of floor space $ 24,000 Advertising Amount of dollar sales $ 30,000 Administrative Number of employees $ 45,000 The following information is available for its three operating (sales) departments: Department Square Feet Dollar Sales Number of employees A 3,000 $ 280,000 6 B 3,400 $ 300,000 8 C 3,600 $ 420,000 10 Totals 10,000 $ 1,000,000 24 What is the total advertising expense allocated to Department B?
Answer: $9,000
Explanation:
Advertising is allocated on the basis of dollar sales at $30,000.
There was a total of $1,000,000 in dollar sales.
$300,000 in dollar sales was allocated to department B
To find the advertising expense for Department B therefore is,
= (Advertising Expense / Total Dollar Sales) * Dollar sales allocated to Department B
= (30,000/ 1,000,000) * 300,000
= $9,000
$9,000 is the total advertising expense allocated to Department B.
A company that produces a single product has a net operating income of $80,000 using variable costing and a net operating income of $104,750 using absorption costing. Total fixed manufacturing overhead was $53,550 and production was 10,500 units both this year and last year. Last year was the first year of operations. Between the beginning and the end of the year, the inventory level: (Do not round intermediate computation and round your final answer to nearest whole number.)
a. increased by 4,853 units
b. decreased by 4,853 units
c. increased by 24,750 units
d. decreased by 24.750 units
Answer:
The correct option is A,increased by 4,853 units
Explanation:
The fact that profit under absorption costing is higher than profit under variable costing implies that some items of inventory under absorption costing had fixed cost included in them,which was expensed under variable costing method as period cost.In other words,closing inventory has increased.
The increase can be computed thus:
=absorption costing profit-variable costing profit/fixed cost per unit
fixed cost per unit=total fixed cost/units of output=$53,550/10,500=$5.1
increase in inventory=($104,750-$80,000)/$5.1=4853 units
The difference between the two profits figure is the fixed cost added to closing inventory under absorption costing which makes the profit goes up.
The difference in net operating income indicates that inventory levels increased by 4,853 units based on the fixed manufacturing overhead cost per unit and the change in net operating income attributable to the absorption of fixed overhead costs in inventory.
The difference in net operating income between variable costing and absorption costing is due to the way fixed manufacturing overhead costs are allocated in inventory. We need to calculate the number of units by which inventory levels changed between the beginning and the end of the year. To solve the problem, we can use the difference in net operating income ($104,750 - $80,000 = $24,750) to determine the inventory change since this difference represents the amount of fixed manufacturing overhead costs that were absorbed in inventory (absorption costing) but not expensed (variable costing).
Because the total fixed manufacturing overhead was $53,550, and it was the same for both years, the change in inventory level can be found by dividing the difference in income by the fixed overhead cost per unit. The fixed manufacturing overhead cost per unit is $53,550 divided by the production quantity of 10,500 units, which equals $5.10 per unit. Therefore, the inventory level changed by $24,750 / $5.10 per unit, which equals 4,853 units.
Since net operating income is higher under absorption costing, inventory levels must have increased during the year to allocate more fixed overhead to the inventory and less to the cost of goods sold. Hence, the correct answer is a. increased by 4,853 units.
(Hard) Dozier Corporation is a fast-growing supplier of office products. Analysts project the attached free cash flows (FCFs) during the next 3 years, after which FCF is expected to grow at a constant 7% rate. Dozier's WACC is 13%. Suppose Dozier has $100 million of debt and 10 million shares of stock outstanding. What is your estimate of the current price per share (stock price)
Answer:
Find attached full question:
The correct option is D.$42.79
Explanation:
In order to determine the current price per share of the company now,we discount all future free cash flows to present value as well as the company's terminal value:
company's terminal is the value of the company after the considered timing horizon
terminal value=free cash in year three*(1+g)/r-g
free cash flow in year three is $40 million
g is the growth rate of free cash flow which is 7%
r is the WACC of 13%
terminal value=40*(1+7%)/(13%-7%)=$ 713.33 million
Present of the company=-$20/(1+13%)+$30/(1+13%)^2+$40/(1+13%)^3+$713.33/(1+13%)^3=$ 527.89 million
The company's value of equity=present worth-debt== 527.89-100=427.89 million
share price=value of equity/number of shares== 427.89/10=$42.79
The current stock price of Dozier Corporation can be estimated using a two-stage discounted cash flow model. This involves discounting the projected free cash flows for the next 3 years at the company's weighted average cost of capital (WACC), then calculating the present value of all future cash flows growing at a constant rate using the Gordon Growth Model. The market value of the firm obtained is then adjusted for debt and divided by the number of outstanding shares to yield the estimated current price per share.
Explanation:The current stock price of Dozier Corporation can be estimated using a two-stage discounted cash flow model because the free cash flow is expected to grow at a steady rate after a period of 3 years. In the first stage, we discount the free cash flows for the next 3 years at Dozier Corporation's weighted average cost of capital (WACC) of 13%. In the second stage, we use the Gordon Growth Model to calculate the present value of all future cash flows growing at a constant rate of 7%. The net present value (NPV) gives us the market value of the firm. To get the price per share, we deduct the debt and divide it by the number of shares outstanding.
Example Calculation
Given FCFs (free cash flows) of $15 million, $20 million, and $25 million for the next 3 years respectively. Stage 1: NPV of explicit forecast period (3 years) = $15m/(1+13%)^1 + $20m/(1+13%)^2 + $25m/(1+13%)^3. Stage 2: Value of perpetual cash flows from year 4 onwards = ($25m * (1+7%)) / (13% - 7%). Deduct $100m of debt from this total value and divide by 10 million outstanding shares to yield the estimated current price per share.
Learn more about Stock Price Estimation here:https://brainly.com/question/32683176
#SPJ11
ortions of the financial statements for Myriad Products are provided below.
MYRIAD PRODUCTS COMPANY
Income Statement
For the Year Ended December 31, 2021
($ in millions)
Sales $ 760
Cost of goods sold 228
Gross margin 532
Salaries expense $ 115
Depreciation expense 84
Amortization expense 5
Interest expense 24
Loss on sale of land 4 232
Income before taxes 300
Income tax expense 150
Net Income $ 150
MYRIAD PRODUCTS COMPANY
Selected Accounts from Comparative Balance Sheets
December 31, 2021 and 2020
($ in millions)
Year
2021 2020 Change
Cash $ 126 $ 116 $ 10
Accounts receivable 239 256 (17)
Inventory 448 466 (18)
Accounts payable 180 166 14
Salaries payable 88 102 (14)
Interest payable 49 36 13
Income tax payable 36 26 10
Required:
Prepare the cash flows from operating activities section of the statement of cash flows for Myriad Products Company using the direct method.
Answer:
Net cash provided from Operating Activities $301
Explanation:
MYRIAD PRODUCTS COMPANY
Cash flow from Operating Activities:
Net Income $150
Adjustment for non cash effects:
Depreciation $84
Amortization $5
Loss on sale of land $4
Total $243
Changes in operating assets and liabilities :
Decrease in Accounts receivable $17
Decrease in Inventory $18
Increase in Accounts Payable $14
Decrease in Salaries Payable ($14)
Increase in Interest Payable $13
Increase in Income tax Payable $10
Net cash provided from Operating Activities $301
yas net fixed assets as $15 million. The fixed assets could currently be sold for $21 million. Muffin’s current balance sheet shows current liabilities of $6.0 million and net working capital of $5.0 million. If all the current accounts were liquidated today, the company would receive $7.30 million cash after paying the $6.0 million in current liabilities. What is the book value of Muffin’s Masonry’s assets today and the market value of these assets?ur full-service brokerage firm charges $115 per stock trade.How much money do you receive after selling 145 shares of Nokia Corporation (NOK), which trades at $16.53? (
Answer:
Book Value = $26 million
Market value = $34.3 million
Explanation:
The computation of book value and the market value is shown below:-
For computing the book value first we need to find out the current assets
Current assets = Working capital + Current liabilities
= $5.0 million + $6.0 million
= $11.0 million
Total book value = Current assets + Fixed assets
= $11.0 million + $15 million
= $26 million
For computing the market value first we need to find out the current assets
Current assets = Cash + Current liabilities
= $7.30 million + $6.0 million
= 13.3 million
Total market value = Fixed assets + Current assets
= $21 million + 13.3 million
= $34.3 million
The most important elements in a business model include all of the following except: A. Selecting a growth strategy B. Verifying that sufficient demand exists for a given product at a given price in a particular market C. Selecting unique features and technologies to be imbedded into the products or services D. Determining how to capture a portion of the value created in terms of revenues and profits E. Identifying market segments to be targeted
Answer:
Option A
Explanation:
In simple words, business model refers to the strategy for creating a profit for a product. This defines the goods or services that the company is trying to offer, the intended audience that it has defined as well as the costs it plans.
A creative technology company must include a business plan, if only to draw funding, help it retain talent, and inspire leaders and managers. Established companies frequently have to review and revise their operating strategies, or struggle to predict emerging developments and obstacles. Investors will study and analyse the corporate strategies of all businesses that are involved in them.
Choosing a development procedure for growth is not really a part of a business framework, but a point of performance of the growth model. Other choices specifically address which kind of goods should be selected in a company with which specific market group and how you'd like to benefit from your package's particular quality.
Consider the following methods of pollution reduction;
a. the government sets a target for maximum emissions
b. the government mandates the installation of specific pollution abatement equipment
c. the government imposes a per unit tax on the good that creates pollution
d. the government gives firms a tax rebate for every unit of pollution abated
Which of the above is an example of a command -and-control approach to reducing pollution?
A. a, b, c, and d
B. a, b, and d only
C. a and b only
D. b only
E. a only
Answer:
option c: A and B
Explanation:
Pollution is common in all environment. be it air pollution, water pollution e.t.c and it is very essential to controland reduce the effect of this pollution in our air, land and water. when we make use of our energy in all, transport and other goods and services more carefully, we can reduce harmful emissions to our air, land and water.
According to the misperceptions theory of the short-run aggregate supply curve, if a firm thought that inflation was going to be 4 percent and actual inflation was 2 percent, then the firm would believe that the relative price of what it produces had a. increased, so it would decrease production. b. decreased, so it would increase production. c. decreased, so it would decrease production. d. increased, so it would increase production.
Answer:
Option C
Explanation:
In simple words, The misconceptions principle or theory in short run maintains that when a retailer sees its commodity prices fall, it makes an incorrect inference that its relative values have decreased as well. The confusion appears to cause dealers to provide the marketplace with less volume. Thus, from the above we can conclude that the correct option is C .
Lopez Sales Company had the following balances in its accounts on January 1, 2018: Cash$68,000 Merchandise Inventory 48,000 Land 108,000 Common Stock 88,000 Retained Earnings 136,000 Lopez experienced the following events during 2018: Sold merchandise inventory that cost $38,400 for $81,600. Sold land that cost $43,200 for $81,000. Required Determine the amount of gross margin recognized by Lopez. Determine the amount of the gain on the sale of land recognized by Lopez.
Answer:
Lopez Sales Company
1. Amount of Gross Margin recognized by Lopez:
Sales = $81,600
Less cost of sales = $38,400
Gross Margin = $43,200
2. Amount of the gain on the sale of land recognized by Lopez:
Land:
Selling price = $81,000
less Cost = $43,200
Gain on sale = $37,800
Explanation:
a) Gross margin is the difference between the selling price and the cost price of a product. It is the profit determined before business running expenses are deducted to obtain the net income or margin.
It measures the ability of the business to generate enough income to cover expenses that are normally incurred in business, like rent, utilities, and salaries and wages.
b) The Gain on sale of any capital asset is the difference between the selling price and the cost (book value). This gain is reported separately in the income statement and is the subject of capital gains tax.
Final answer:
Lopez Sales Company recognized a gross margin of $43,200 from the sale of merchandise inventory and a gain of $37,800 from the sale of land.
Explanation:
To determine the gross margin recognized by Lopez, we look at the merchandise inventory sold. Lopez sold it for $81,600, having initially cost them $38,400 to purchase. The gross margin is the sales revenue minus the cost of goods sold, which in this case is $81,600 - $38,400 = $43,200.
For the gain on the sale of the land, we calculate the difference between the selling price and the original cost of the land. Lopez sold the land for $81,000 which originally cost them $43,200. Therefore, the gain on the sale of land is $81,000 - $43,200 = $37,800.
Comfort Ice Cream has plans to pay decreasing annual dividends of $1.75, $1.60, and $1.45 over the next three years, respectively. After that, the firm will increase the dividend by 4 percent each year. What is the value of this stock today at a discount rate of 12 percent?
Answer:
The value of this stock today at a discount rate of 12 percent is $17.24
Explanation:
According to the given data we would have to calculate first the followng:
Year 4 dividend = 1.45 * 1.04 = 1.508
Value at year 3 = D4 / required rate - growth rate
Value at year 3 = 1.508 / 0.12 - 0.040
Value at year 3 = 18.85
Therefore, Value of stock today = 1.72 / ( 1 + 0.12)∧1 + 1.60 / ( 1 + 0.12)∧2 + 1.45 / ( 1 + 0.12)∧3 + 18.85 / ( 1 + 0.12)3
=1.53+1.27+1.03+13.41
Value of stock today = $17.24
The value of this stock today at a discount rate of 12 percent is $17.24
Answer:
$15.85
Explanation:
Worth of the stock is the present value of all the cash flows associated with the stock. Dividend is the only cash flow that a stock holder receives against its investment in the stocks. We need to calculate the present values of all the dividend payments.
Formula for PV of dividend
PV of Dividend = Dividend x ( 1 + r )^-n
1st year
PV of Dividend = $1.75 x ( 1 + 12% )^-1 = $1.56
2nd year
PV of Dividend = $1.60 x ( 1 + 12% )^-2 = $1.28
3rd year
PV of Dividend = $1.45 x ( 1 + 12% )^-3 = $ 1.03
After three years the dividend will grow at a constant rate of 4%, so we will use the following formula to calculate the present value
PV of Dividend = [ $1.45 x ( 1 + 4% ) / ( 12% - 4% ) ] x [ ( 1 + 12% )^-4 ]
PV of Dividend = $11.98
Value of Stock = $1.56 + $1.28 + $1.03 + $11.98 = $15.85