Final answer:
The Tragedy of the Commons, described by Garrett Hardin, highlights how individual actions based on self-interest can lead to the depletion of shared resources, exemplified by environmental issues like overfishing, deforestation, and air pollution. It underscores the conflict between individual interests and the common good.
Explanation:
The concept of the Tragedy of the Commons was introduced by Garrett Hardin in 1968 to describe a dilemma in which multiple individuals acting independently and rationally according to their own self-interest can ultimately deplete a shared limited resource, even when it is clear that it is not in anyone's long-term interest for this to happen. This concept applies to environmental issues such as overfishing, deforestation, and air pollution. Hardin's essay illustrates the conflict between individual interests and the common good, and the need for responsible resource management.
Examples today include the overuse of fisheries, forest areas, and the Earth's atmosphere as a dumping ground for greenhouse gases. The Tragedy of the Commons extends to various aspects of the environment, where the absence of restrictions leads to the over-exploitation of resources and environmental degradation. The predicament lies in the freedom of individuals to use common resources without considering the long-term effects and sustainability, potentially leading to the ruin of the resources for everyone.
Total mass of H2O2 in 20 grams of an aqueous H2O2 solution
Answer:
3= (x/20.0g) x 100%
or (20)(0.03)
Answer 0.6g
Final answer:
The total mass of H2O2 in a 20 grams 3.00% aqueous H2O2 solution is 0.6 grams, calculated by taking 3.00% of the total mass of the solution.
Explanation:
To calculate the total mass of H2O2 in 20 grams of a 3.00% aqueous H2O2 solution, use the percentage by mass. The mass of H2O2 can be found by multiplying the total mass of the solution by the percentage of H2O2 in the solution (3.00%).
The calculation is as follows:
Total mass of the solution = 20 gramsPercentage of H2O2 by mass = 3.00%Mass of H2O2 = 20 grams × 3.00% = 0.6 gramsTherefore, the amount of H2O2 in a 20 grams aqueous solution is 0.6 grams.
13. When iron nad is put in to a beaker containing copper sulphate solution.
of the solution slowly change in to Green
a) Why does the colour of the solution change?
b) Write the equation involved in this process?
c) Is it a chemical or physical change?
Answer:
A simple displacement reaction occurs when an iron nail is immersed to a beaker containing copper sulphate solution.
a)
Iron is more reactive than copper. As a result a displacement reaction will take place. The ferrous or Fe (II) irons will move to the solution. The copper ions (Cu II) will get deposited on the nail. This will cause the colour to change from blue to green.
b)
The equation can be written as:
Fe (s) + CuSO4 (aq) -> FeSO4 (aq) + Cu (s)
c)
A chemical change can be described as a change that causes a substance to change to another form. Hence, this reaction is a chemical change.
Find the simple interest on a $22,000 principal, deposited for 4 years at a rate of 4.25%
The simple interest is equal to $3740 on a principal of $ 22,000, deposited for 4 years at a rate of 4.25 %.
What is simple interest?Simple interest can be based on the principal of a loan. Simple interest does not compound, a creditor only pays interest on the principal amount and a borrower never has to pay more interest on the previous interest.
Simple Interest (S.I.) can be described as the method of determining the interest amount for a principal of money at the rate of interest.
To determine simple interest, multiply the principal by the interest rate and the time.
Simple Interest = Principal ×Rate × Time
Given, the principal amount, P =$ 22000
The rate, R = 4.25%
Time, T = 4 years
The simple interest can be calculated as:
[tex]\displaystyle S.I. =\frac{P\times R\times T}{100}[/tex]
[tex]\displaystyle S.I. =\frac{22000\times 4.25\times 4}{100}[/tex]
Simple interest = $ 3740
Therefore, the simple interest is equal to $ 3740.
Learn more about simple interest, here:
https://brainly.com/question/17282817
#SPJ2
A plutonium atom undergoes nuclear fission. Identify the missing element in the nuclear equation.
230 pu
Answer:
[tex]_{92}^{226}U[/tex]
Explanation:
Let's firstly identify the atomic number (the number of protons) of Pu. This is done by referring to the periodic table and finding Pu. The atomic number of Pu is:
[tex]Z=94[/tex]
In order to identify the type of a nuclear decay, we need to find the N/Z ratio. This is the ratio between the number of neutrons and the atomic number of an isotope. The number of neutrons is found by subtracting the number of protons from the mass number:
[tex]N=M-Z[/tex]
That said, the N/Z ratio equation becomes:
[tex]N/Z=\frac{M-Z}{Z}=\frac{M}{Z}-1=\frac{230}{94}-1=1.45[/tex]
This is a relatively high number thinking about the belt of stability of isotopes. Ideally, stable isotopes with a low Z value have an N/Z ratio of 1. Heavier isotopes with Z > 50 would have a slightly higher N/Z ratio and would be stable around N/Z = 1.25. This means we wish to decrease the N/Z ratio as much as possible.
Among all the decays, alpha-decay is preferred to decrease the N/Z ratio significantly (1.45 is much higher than 1.25). That said, we'll release an alpha particle with some nucleotide X of mass M and atomic number Z:
[tex]_{94}^{230}Pu\rightarrow _Z^MX+_2^4\alpha[/tex]
According to the mass and charge conservation law:
[tex]230=M+4\therefore M=230 - 4 = 226[/tex]
[tex]94=Z+2\therefore Z = 94-2 = 92[/tex]
Identify an element with Z = 92 in the periodic table. This is uranium, U:
[tex]_{92}^{226}U[/tex]
Na + MgF^2 = NaF+ Mg
Answer:
2Na + MgF2 → 2NaF + Mg
Explanation:
A(n) ___chemical equation has the same number of atoms of each element on both sides.
false
balanced
imbalanced
physical
Answer:
A balanced chemical equation has the same number of atoms of each element on both sides.
Explanation:
This is because of the Law of Conservation of Mass. Therefore, valid chemical equations need to be balanced, in other words, to have the same number of atoms of each element on both sides.
Determine the number of ions produced in the dissociation of the compound listed. CaCl2
Answer:
See the explanation below, please.
Explanation:
Then the dissociation of the compound CaCl2 (Calcium chloride):
CaCl2 ---> Ca 2+ + 2Cl -
The compound dissociates into Ca2 + and Chloride (Cl-)
(two ions are generated in dissociation)
Answer:
The answer is 2 ions
Explanation:
the oldest and farthest celestial bodies of the universe
Answer:
GN-z11 is the oldest
Explanation:
GN-z11 has a spectroscopic redshift of z = 11.09, which corresponds to a proper distance of approximately 32 billion light-years
Globular clusters are some of the oldest structures in the Milky Way, with ages suggesting the age of the universe to be at least around 11 to 13 billion years old. The Boomerang Nebula is among the youngest and coldest objects known. The study of distant galaxies and ancient globular clusters helps astronomers understand the early universe.
The oldest and farthest celestial bodies in the universe provide insight into the universe's early history. Globular clusters are among the oldest structures in our Galaxy, with the youngest being about 11 billion years old, setting a lower limit for the age of the universe. Our Milky Way, containing such ancient globular clusters, suggests it was born at least 13 billion years ago. One famous globular cluster, M13, is roughly 26,000 light-years away from us and has an estimated mass of around a million times that of the Sun. In contrast to these ancient objects, the Boomerang Nebula is a much younger planetary nebula and is currently the coldest known object in the Universe.
In order to understand the early universe, astronomers study not only globular clusters but also very distant galaxies, as they provide a view of the universe when it was very young. Observations of stars in the halo of the Milky Way, red giant stars, suggest distances of almost 1 million light-years, indicating the immense scale and diversity of structures within our galaxy.
if 20.0 g of magnesium react with excess Hydro chloric acid how many grams of magnesium chloride will be produced
Answer:
78.9g
Explanation:
To find the mass of magnesium chloride produced, convert 20.0 g of magnesium to moles, use the reaction's stoichiometry to get the moles of magnesium chloride, and then convert back to grams. The balanced chemical equation for the reaction is Mg(s) + 2 HCl(aq) → MgCl₂(aq) + H₂(g), and the result is 78.33 grams of magnesium chloride.
Explanation:To find out how many grams of magnesium chloride will be produced when 20.0 g of magnesium react with excess hydrochloric acid, we first need to consider the balanced chemical equation for the reaction:
Mg(s) + 2 HCl(aq) → MgCl₂(aq) + H₂(g)
From the balanced equation, we see that one mole of magnesium (Mg) reacts with two moles of hydrochloric acid (HCl) to produce one mole of magnesium chloride (MgCl₂) and one mole of hydrogen gas (H₂). To determine the mass of magnesium chloride produced, use the molar mass of magnesium (24.31 g/mol) to convert the mass of magnesium into moles, then use the stoichiometry of the reaction to find the corresponding moles of magnesium chloride produced.
The molar mass of magnesium chloride (MgCl₂) is 95.21 g/mol. After calculating the moles of Mg, that amount will be directly equal to the moles of MgCl₂ formed, since the ratio is 1:1. Finally, convert the moles of magnesium chloride to grams using its molar mass.
The calculation steps are as follows:
Determine moles of Mg: 20.0 g Mg × (1 mol Mg / 24.31 g Mg) = 0.8225 mol MgAccording to the reaction stoichiometry, moles of MgCl₂ produced = moles of Mg reacted = 0.8225 mol MgCl₂Determine the mass of MgCl₂: 0.8225 mol MgCl₂ × (95.21 g MgCl₂ / 1 mol MgCl₂) = 78.33 g MgCl₂Therefore, 78.33 grams of magnesium chloride will be produced when 20.0 g of magnesium reacts with excess hydrochloric acid.
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ2
Suppose 17 grams of sucrose is dissolved into 183 grams of water. What is the concentration of sucrose in ppm?
Answer:
85 x 10³ ppm
Explanation:
Data Given:
mass of sucrose = 17 g
mass of water = 183 g
Concentration in ppm = ?
Solution:
Formula Used
Concentration (ppm) = Solute / Solution x 10⁶ ............ (1)
**Note : 1 ppm = 1 mg / L
First we have to know about mass of solution
So
Mass of solution = mass of solute + mass of solvent ................. (2)
Put values in equation 2
Mass of solution = 17 g sucrose + 183 g water
Mass of solution = 200 g
Now Put Values in equation 1
Concentration (ppm) = Solute / Solution x 10⁶
Concentration (ppm) = 17 g / 200g x 10⁶
Concentration (ppm) = 0.085 x 10⁶
Concentration (ppm) = 85 x 10³
Concentration of sucrose = 85 x 10³ ppm
The concentration of sucrose in the solution is 85,000 parts per million (ppm).
Explanation:The concentration of sucrose in the given solution can be calculated using the formula:
Concentration (ppm) = mass of solute (g) / mass of solution (g) x 10^6
For this case, the mass of sucrose is 17 grams and the mass of the solution (sucrose + water) is 17 grams + 183 grams = 200 grams. Plugging in the values, we get:
Concentration (ppm) = 17 g / 200 g x 10*6 = 85,000 ppm
Therefore, the concentration of sucrose in the solution is 85,000 parts per million (ppm).
Learn more about concentration of sucrose here:https://brainly.com/question/29408228
#SPJ11
Which of these statements is true?
A. Chemical energy is a form of potential energy.
B. Chemical energy is a form of nuclear energy.
C. Chemical energy is associated with moving electrons.
D. Chemical energy is associated with molecular motion.
why are metals conductive?
Answer:
High density, metallic bonds
Explanation:
We may look at this question from the structural properties of the metals:
metals in their solid states are the most dense phases of all the standard phases we know (solids, liquids and gases). This means the particles within a metal lattice are very closely packed. Both heat and electricity is conducted when particles interact and touch one another, so that either energy or electric current might travel from one particle to the other easily. High density means low distances between the atoms, so they can interact easily;the main reason, however, is the fact that metals form metallic bonds, also known as 'sea of electrons'. We have metal cations floating in a sea of their valence electrons. This forms a medium in which both heat and electricity can travel easily.in the wave-mechanical model, an orbital is a region of space in an atom where there is
Answer:
electrons
Explanation:
The orbitals are the spaces around the nucleus.
Neutrons and protons are in the nucleus of an atom, and the electrons revolve around the nucleus.
How many convalent bonds are there in one molecule of carbon dioxide, CO2?
(A) 0 covalent bonds
(B) 2 covalent bonds
(C) 4 covalent bonds
(D) 6 covalent bonds
Answer:
C 4 convalents bonds
Explanation:
I don't no the explanation
The one molecule of carbon dioxide, CO₂ contain 2 covalent bond. Therefore, option B is correct.
What is covalent bond ?An electron exchange that results in the formation of electron pairs between atoms is known as a covalent bond. Bonding pairs or sharing pairs are the names given to these electron pairs. The equilibrium between the forces that attract and repel atoms.
An atom can establish bonds with other atoms in two main ways: covalent and ionic. The sharing of electrons between two or more atoms forms a covalent connection.
Each oxygen atom in carbon dioxide forms two covalent bonds with the carbon atom, known as a double bond and represented here as two lines. However, in symmetrical molecules, the attraction of the atoms on the electrons is equal, and the charge distribution is uniform. Nonpolar molecules are those with symmetry.
Thus, option B is correct.
To learn more about the covalent bond, follow the link;
https://brainly.com/question/10777799
#SPJ2
13. Base your answer to the following question on the information below and you knowledge of chemistry,
A 100.-gram sample of liquid water is heated from 20.0°C to 50.0°C. Enough KCION(S) is dissolved
in the sample of water at 50.0°C to form a saturated solution.
Using the information on Table B, determine the amount of heat absorbed by the water
when the water is heated from 20.0°C to 50.0°C.
Answer:
Heat absorbed by water is 12540 J
Explanation:
Given data:
Mass of water = 100 g
Temperature changes = 20.0°C to 50.0°C
Heat absorbed by water = ?
Solution:
Specific heat of water is 4.18 j/g.°C
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 50.0°C - 20.0°C
ΔT = 30.0°C
Q = m.c. ΔT
Q = 100 g. 4.18 j/g.°C. 30.0°C
Q = 12540 J
Heat absorbed by water is 12540 J.
Using the formula for heat absorption (q=mcΔT), we can calculate that the water absorbed 12,552 joules of heat when it was heated from 20.0°C to 50.0°C.
Explanation:In order to determine the amount of heat absorbed by the water when being heated from 20.0°C to 50.0°C, we can use the formula q = mcΔT.
Here, 'q' is the heat absorbed, 'm' is the mass, 'c' is the specific heat capacity of water, and 'ΔT' is the change in temperature. Given the mass (m) of the water is 100.0 grams, the specific heat capacity (c) of water is 4.184 J/g°C, and the change in temperature (ΔT) is 50.0°C - 20.0°C = 30.0°C.
Substituting these values into the equation gives q = (100.0g)(4.184 J/g°C)(30.0°C) = 12,552 joules. Therefore, the water absorbed 12,552 joules of heat when it was heated from 20.0°C to 50.0°C.
Learn more about Heat Absorption here:https://brainly.com/question/12943685
#SPJ11
Help please!
Pretend you have a job building tricycles. If you had 200 handle bars, 150 wheels,
250 pedals, and 75 seats. What is the limiting reactant?
Answer:
Correct answer - wheels
Explanation:
Limiting reactant:
The reactant that is used up first in the chemical reaction.i.e. the reactant that restricts the amount of product that can be produced.The unused product left in the reaction.
For example,
[tex]2H_{2}+O_{2}\rightarrow 2H_{2}O[/tex]
The ratio of creating [tex]H_{2}O[/tex] is
[tex]2molH_{2}:1molO_{2}:2molH_{2}O[/tex]
If you had 8 moles of hydrogen and only 3 moles of oxygen ;you would have enough oxygen to produce 6 moles of water with 2 moles of hydrogen leftover.
From the given,
200 handle bars, 150 wheels, 250 pedals, and 75 seats.
For tricycle making, each one required one seat, handle,two pedals and three wheels.
Hence, wheels are first consumed.
Therefore, wheels are limiting reactant.
In an experiment, 9 g of aluminum react with 8 g of sulfur to form aluminum sulfide. Calculate the grams of aluminum sulfide formed. Al + S → Al2S3
Answer:
The grams of aluminum sulfide formed are ; 12.51 g
Explanation:
Using Formula,
[tex]mole = \frac{given\ mass}{Molar\ mass}[/tex]
Calculate the moles of Al and S :
Given mass of Al = 9 g
Molar mass of Al = 27 g/ mole
[tex]mole = \frac{9}{27}[/tex]
Mole of Al = 0.33
Given mass of S = 8 g
Molar mass of S = 32 g/mole
[tex]mole = \frac{8}{32}[/tex]
Mole of S = 0.25
The balanced chemical equation for the reaction between aluminium and sulfur is :
[tex]2Al(s) + 3S(s)\rightarrow Al_{2}S_{3}(s)[/tex]
Here ,
2 mole of Al needs 3 moles of S
1 mole of Al needs 3/2(= 1.5) moles of S
hence ,
0.33 mole of Al should require
[tex]\frac{3}{2}\times 0.33[/tex] moles of S
Sulfur needed = 0.495 mole
Available S = 0.25 mole
So there is less sulfur than required , S is the limiting reagent
Amount of S decide the Amount of Al2S3 formed
3 mole of S produce 1 mole of Al2S3
1 mole of S produce 1/3 mole of Al2S3
0.25 mole will produce :
[tex]0.25\times\frac{1}{3}[/tex]
= 0.0833 moles of Al2S3
[tex]Al_{2}S_{3}[/tex] = 0.083 mole
Molar mass of
[tex]Al_{2}S_{3}[/tex] = 150.16 g/mole
[tex]mole = \frac{given\ mass}{Molar\ mass}[/tex]
[tex]given\ mass = moles\times molar\ mass[/tex]
[tex]given\ mass = 0.083\times 150.16[/tex]
= 12.51 g
Phosphoric acid (H3PO4) and boric acid (H3BO3) each dissociate fully producing four ions in solution
A)True
B) False
B) False
Explanation:
Phosphoric acid (H₃PO₄) and boric acid (H₃BO₃) are weak acids, so they will not fully dissociate in solution.
Bellow you mai find the dissociation reactions of the acids:
H₃PO₄ + H₂O ⇄ H₂PO₄⁻ + H₃O⁺
H₂PO₄⁻ + H₂O ⇄ HPO₄²⁻ + H₃O⁺
HPO₄²⁻ + H₂O ⇄ PO₄³⁻ + H₃O⁺
Phosphoric acid (H₃PO₄) produces four ions in solution: H₂PO₄⁻, HPO₄²⁻, PO₄³⁻ and H₃O⁺.
H₃BO₃ + H₂O ⇄ H₂BO₃⁻ + H₃O⁺
H₂BO₃⁻ + H₂O ⇄ HBO₃²⁻ + H₃O⁺
HBO₃²⁻ + H₂O ⇄ BO₃³⁻ + H₃O⁺
Boric acid (H₃BO₃) produces four ions in solution: H₂BO₃⁻, HBO₃²⁻, BO₃³⁻ and H₃O⁺.
Learn more about:
acid and bases
https://brainly.com/question/12883745
https://brainly.com/question/10468518
#learnwithBrainly
Which statement best describes the pH of pure water?
It is neutral because the concentration of hydronium ions equals that of hydroxide ions.
It is neutral because the pure liquid contains neither hydronium ions nor hydroxide ions.
It is acidic because it has a hydronium ion concentration of 1.0 x 10-7 M-
It is basic because it has a hydroxide ion concentration of 1.0 x 10-7M.
Mark this and return
I
Next
Submit
The pH of pure water is neutral because the concentration of hydronium ions equals that of hydroxide ions.
Answer: Option A
Explanation:
Water is one of the most important constituents of living being. It is said that there is no life without water. So that water need to neutral in nature to save life. Pure water is composed of hydronium [tex]H^{+}[/tex] and hydroxide [tex]\left(O H^{-}\right)[/tex] ions. It is known that hydronium ions are acidic in nature with concentration of [tex]1 \times 10^{-7} \mathrm{M} / \mathrm{L}[/tex].
Similarly, the hydroxide ions which are basic in nature will be in same concentration as that of hydronium ions. So, as the concentration of basic and acidic elements are equal with the same strength of pH, the combination of these ions lead to formation of pure water with the pH being neutral.
A hurricane warning has been issued in a location in Florida. What would people in the location most likely do? (2 points) Question 20 options: 1) turn on all major appliances in the house 2) remove fuel from their cars and generators 3) check and replenish emergency supplies 4) sit on the floor beside windows and doors
Answer:3 check and replenish emergency supplies
Explanation: This one is the only one that is not counter intuitive.
The expression of 5522 km in scientific notation is
Answer:
5.522 * 10^3.
Explanation:
5522 = 5.522 * 10^3 .
Which gas has properties that are most similar to those of an ideal gas
Answer:
H2
Explanation:
The gas which is considered to be ideal is helium as it has a single atom. Among the options for this question, H2 is the gas which has properties similar to ideal gas.
The characteristics of an ideal gas are:
They have a small structureThey do not tend to form electrical bonds with other neighbouring molecules.Molecules of H2 exhibit both these properties hence H2 is the correct option.
What types of energy are involved in a chemical reaction?
is the energy required for a chemical reaction to take place, and
is the energy associated with
every substance.
Answer:
Enthaply
Explanation:
The Energy involved in a chemical reaction is the difference in the amounts of stored chemical energy between the products and the reactants. This stored chemical energy, or heat content, of the system is known as its enthalpy.
Answer:
The types of energy in chemical reactions are as follows: internal energy, enthalpy
Explanation:
The internal energy is the sum of all the energies, it is due to the positions and movements of the subatomic particles, atoms and molecules that constitute it, as well as to the unions between the atoms. In chemical reactions there is a variation in the internal energy of substances, classified as exothermic if they release energy in the form of heat, endothermic if they absorb energy in the form of heat.
On the other hand, the enthalpy of reaction is the heat absorbed or released in a chemical reaction at a constant pressure. It is defined as the subtraction between the sum of the enthalpies of the products and the sum of the enthalpies of the reagents.
what is the molarity of a 5.0 L solution that contains 0.5 moles of KNO3
The molarity of the KNO3 solution is 0.1 M.
To calculate the molarity of a KNO3 solution, we use the formula for molarity:
Molarity (M) = moles of solute / liters of solution
In this case:
Moles of KNO3 = 0.5 moles
Volume of solution = 5.0 L
Using the formula:
Molarity (M) = 0.5 moles / 5.0 L = 0.1 M
The molarity of the KNO3 solution is 0.1 M.
A client is undergoing therapy in a whirlpool unit that has been plugged into an extension cord. What is this an example of?
Using extension or flexible cords improperly
Explanation:
A client undergoing therapy in a whirlpool unit plugged into an extension cord demonstrates a wrong and improper use of extensions and flexible cords. This is not a safe way to connect an electrical circuit.
Unless a Ground Fault Circuit Interrupter is used, the client is at a risk of suffering from electrocution. The Ground Fault Circuit Interrupter is able to detect leakages in the circuit and breaks it off.learn more:
electric current https://brainly.com/question/4438943
#learnwithBrainly
Using an extension cord with a whirlpool unit for therapy is an example of poor safety practices due to potential voltage drop and compromised earthing, which could result in the appliance not operating properly and raise electrical safety concerns.
A client undergoing therapy in a whirlpool unit that has been connected to an extension cord may be an example of poor safety practices in a health care setting. The use of an extension cord for a high-powered appliance such as a whirlpool may result in a reduced power output, leading to the appliance not operating correctly. This is because the voltage drop across the extension cord can be large, which decreases the voltage at the appliance, therefore reducing its effectiveness. Moreover, earthing or grounding may be compromised, which is essential for the safety of electrical appliances to prevent electric shocks.
The situation of a client being in a whirlpool unit connected to an extension cord can raise concerns about adherence to safety protocols. It is important for health care providers to ensure that all electrical safety requirements are met, including proper installation and usage of all therapeutic equipment. Electrical appliances should be properly earthed, and any form of makeshift extension cord usage should be carefully evaluated and generally avoided.
If 84 grams of sodium chloride reacts with an excess amount of magnesium oxide, how many grams of sodium oxide will be produced
Answer:
56.0g (3 s.f.)
Explanation:
Please see attached picture for full solution.
The motion of particles in an object the faster the particles move the warmer the object will feel
Answer:
This is true.
Explanation:
Speed of the particles in terms of energy is described by kinetic energy. Kinetic energy is directly proportional to the square of velocity. Essentially, the greater the speed of the particles, the greater the kinetic energy.
Now, let's say our particles are in some specific container. When particles move fast, they possess high kinetic energy. The greater the kinetic energy the more of it can be transferred to the walls of a container when particles collide with them. This is transferred as another energy form, heat. Particles lose a fraction of their kinetic energy by transferring it to the container and heating it up.
Which of the following will NOT break down due to a chemical change?
1.H2O
2.Ne
3.N2O
4.HF
Answer:
2. Ne
Explanation:
Neon is an element. You cannot break down an element by chemical means.
1, 3, and 4 are wrong. They are all compounds, and compounds can be broken down by chemical means.
Neon will not break down due to a chemical change, therefore option (a) is correct .
What do you mean by the chemical change ?A chemical change is the change of one material into another, resulting in new materials with different properties .
Properties of chemical change -:
Some examples of chemical change are-
The formation of curd from milk through fermentation .Rusting of iron is a form of corrosion .Neon will not break down due to a chemical change, hence option (a) is correct .
Learn more about chemical change ,here:
https://brainly.com/question/23693316
#SPJ6
What will be kept the same (control) in the test?
The control variable is the one that is kept same in the test an throughout the test
Explanation:
The scientific constant that is kept constant throughout the experiment is not changed and the value remains constant throughout the experiment and they have strong influence in the results
To test the relationship between the dependent and the independent variables determination of the control variable is necessary and the resulting value changes if the control variables are not kept constant throughout the experiment
This will also bring about the co relationship between dependent variable and the independent variable
What is the answer to this chemthink?
Answer:
I think its allow some to leak out into the air and leve it out on a cold day sorry if its wrong <3
Explanation: