1. Metamorphic rocks form from heat and pressure changing the original or parent rock into a completely new rock.
2.There are two basic types.
Intrusive igneous rocks crystallize below Earth's surface, and the slow cooling that occurs there allows large crystals to form.
Extrusive igneous rocks erupt onto the surface, where they cool quickly to form small crystals. Some cool so quickly that they form an amorphous glass.
3. Erosion is the wearing away of the land by forces such as water, wind, and ice. Erosion has helped to form many interesting features of the Earth's surface including mountain peaks, valleys, and coastlines. There are many different forces in nature that cause erosion.
4. • Frost and Salt Wedging. One of the more common forms of mechanical weathering is frost wedging. ...
• Unloading and Exfoliation. ...
• Water and Wind Abrasion. ...
5. Plucking, also referred to as quarrying, is a glacial phenomenon that is responsible for the erosion and transportation of individual pieces of bedrock, especially large "joint blocks". This occurs in a type of glacier called a "valley glacier".
6. Rusting, a well known example of corrosion, is the breakdown of the metal iron. The reactants of this chemical reaction are iron, water, and oxygen, and the product is hydrated iron oxide, better known as rust. Rust, unlike iron, is crumbly, orange, and pretty much useless for building things.
7. rainfall made sufficiently acidic by atmospheric pollution that it causes environmental harm, typically to forests and lakes. The main cause is the industrial burning of coal and other fossil fuels, the waste gases from which contain sulfur and nitrogen oxides, which combine with atmospheric water to form acids.
8. Magma that cools quickly forms one kind of igneous rock, and magma that cools slowly ...
9. When magma rises from deep within the earth and explodes out of a volcano, it is called lava, and it cools quickly on the surface. Rock formed in this way is called extrusive igneous rock.
10. When water becomes saturated with dissolved minerals, particles can crystallize out of the water and form minerals. Chemical rocks form when minerals crystallize directly from water.
11. Sugar dissolves faster in hot water than it does in cold water because hot water has more energy than cold water. When water is heated, the molecules gain energy and, thus, move faster.
12. Gypsum and halite
13. the repeating pattern of a mineral's particles forms a solid called a crystal. A crystal has flat sides, called faces, that meet at sharp edges and corners. a mineral has a definite chemical composition or range of compositions.
I hope this is what you’re looking for if not I’m very sorry :/
The formation of rocks, types of weathering, and characteristics of minerals are explained in detail. For instance, metamorphic rocks are formed by heat and pressure, igneous rocks are divided into intrusive and extrusive, and mechanical weathering includes processes such as frost wedging and thermal expansion.
Explanation:1. Metamorphic rock needs heat and pressure to form.
2. The two types of igneous rock are intrusive (plutonic) and extrusive (volcanic).
3. Water, wind, and ice are three things that erode rocks.
4. Three examples of mechanical weathering include frost wedging, thermal expansion, and abrasion.
5. Plucking is when a glacier picks up rocks in the lower side.
6. Rust is an iron oxide (a type of corrosion) that forms in the presence of oxygen and moisture.
7. Acid rain is precipitation that contains higher than normal amounts of sulfuric or nitric acids. It's typically from pollutant gases in the atmosphere.
8. Magma cools slowly below the Earth’s surface.
9. Lava cools quickly on the Earth’s surface.
10. When minerals crystallize from water solutions, the narrow channels form veins.
11. When the hot water cools crystals form.
12. Halite, a mineral form of salt, is often left behind by evaporation.
13. The repeating pattern in a mineral is called its crystal lattice.
Learn more about Matter and Minerals here:https://brainly.com/question/38858139
#SPJ12
The universal force that exists detween any objects with mass is called?
Answer:
Gravity
Everything with mass has gravity
The most unusual characteristic of Uranus is _____.
its green color
the icy cold temperature
the axis tilted at 98°
the methane atmosphere
Answer:
the axis is tilted at 98 degrees
Explanation:
Uranus is blue, not green; it has an atmosphere of hydrogen and helium, not methane. While it does have an icy cold temperature, that's not a very unusual characteristic for an outer planet. However, the tilt of the axis is unusual; no other planet is tilted almost completely on its side!
How do I find the molar mass of Copper (II) Nitrate?
Answer:
The molar mass of copper (II) nitrate is 187.5 g/mol.
Explanation:
The molar mass is the mass of all the atoms in a molecule in grams per mole. To calculate the molar mass of a molecule, we first obtain the atomic weights from the individual elements in a periodic table. We then count the number of atoms and multiply it by the individual atomic masses.
what is responsible for the intense heat and pressure in the sun's core?
Answer:
Nuclear Fusion
Explanation:
This creates heat and protons that can heat up the sun
The core is composed of hot, dense plasma. The process nuclear fusion is responsible for the intense heat and pressure in the sun's core.
What is nuclear fusion?The process in which two lighter nuclei fuse together to form a heavier nucleus with the simultaneous release of a huge amount of energy is defined as the nuclear fusion.
Some mass is always lost during this process and this is converted into energy in accordance with Einstein's equation, E = mc². This huge amount of energy is released.
The fusion reactions are common in the interior of stars. The energy of our sun is believed to arise from a number of complex fusion steps. The net reaction is:
4 (₁¹H) → ₂⁴He + 2 (₊₁⁰e) + energy
During nuclear fusion in the core photons and neutrinos are released. These particles carry and emit the light, heat and energy of the sun.
To know more about nuclear fusion, visit;
https://brainly.com/question/12701636
#SPJ2
According to the Arrhenius definitions of acids and bases, choose the bases from the list of acids and bases. Check all that apply.
Ba(OH)2
HIO3
H2CO3
CsOH
Answer:
to make it more simple its A and D
Explanation:
edge
Arrhenius bases are the species that release hydroxide ions in the solution. Barium hydroxide and Caesium hydroxide are examples of Arrhenius bases.
What are Arrhenius's bases?Arrhenius bases are the chemical compounds that increase the concentration of the hydroxide ion in a solution when gets ionized. Whereas the acids release hydrogen ions when dissolved in water.
Barium hydroxide and Caesium hydroxide are the chemical species when dissolved in water will completely dissociate to release hydroxide ions and are the strong bases.
Therefore, option A. barium hydroxide and option D. cesium hydroxide are Arrhenius bases.
Learn more about Arrhenius bases here:
https://brainly.com/question/14456010
#SPJ2
Giving brainliest to correct answer!
What kind of energy does hot water have?
Answer: Thermal Energy
Explanation:
Answer:
Hot water has kinetic energy
Explanation:
That is an energy that involves movement. Kinetic energy water causes flows and make waves exist
Which type of decay has the greatest mass?
A.
alpha
B. beta
gamma
D.
nuclear
Answer:
Alpha has the greatest mass- A.
Answer: The correct answer is Option A.
Explanation:
For the given options:
Option 1: AlphaAlpha decay is defined as the process in which alpha particle is emitted. In this process, a heavier nuclei decays into a lighter nuclei. The alpha particle released carries a mass of 4 units.
[tex]_Z^A\textrm{X}\rightarrow _{Z-2}^{A-4}\textrm{Y}+_2^4\alpha[/tex]
Option 2: BetaBeta decay is defined as the process in which beta particle is emitted. In this process, a neutron gets converted to a proton and an electron. The beta particle does not have any mass.
[tex]_Z^A\textrm{X}\rightarrow _{Z+1}^A\textrm{Y}+_{-1}^0\beta[/tex]
Option 3: GammaGamma decay is defined as the process in which an unstable nuclei gives off excess energy by a spontaneous electromagnetic process and thus releases [tex]\gamma -radiations[/tex]. These radiations does not have any mass.
[tex]_Z^A\textrm{X}^*\rightarrow _Z^A\textrm{X}+_0^0\gamma[/tex]
Option D: NuclearNuclear reactions are defined as the reactions in which change of nucleus takes place.
Hence, the correct answer is Option A.
6. 100 ml of gaseous hydrocarbon consumes 300
ml of oxygen for the complete combustion.
The hydrocarbon is
[MOE 2060]
a. C2H4
b. C2H2
с. С3Н8
d. C2H6
Answer:
a. C₂H₄Explanation:
At constant pressure and temperature, the mole ratio of the gases is equal to their volume ratio (a consequence of Avogadro's law).
Hence, the complete combustion reaction that has a ratio of 100 ml of gaseous hydrocarbon to 300 ml of oxygen, is that whose mole ratio is 1 mol hydrocarbon : 3 mol of oxygen.
Then, you must write the balanced chemical equations for the complete combustion of the four hydrocarbons in the list of choices, and conclude which has such mole ratio (1 mol hydrocarbon : 3 mol oxygen).
A complete combustion reaction of a hydrocarbon is the reaction with oxygen that produces CO₂ and H₂O, along with the release of heat and light.
a. C₂H₄:
C₂H₄ (g) + 3O₂ (g) → 2CO₂(g) + 2H₂O (g)Precisely, for this reaction the mole ratio is 1 mol C₂H₄: 2 mol O₂, hence, this is the right choice.
The following analysis just shows that the other options are not right.
b. C₂H₂:
2C₂H₂ (g) + 5O₂ (g) → 4CO₂(g) + 2H₂O (g)The mole ratio for this reaction is 2 mol C₂H₂ :5 mol O₂.
с. С₃Н₈
C₃H₈ (g) + 5O₂ (g) → 3CO₂(g) + 4H₂O (g)The mole ratio is 1 mol C₃H₈ : 5 mol O₂
d. C₂H₆
2C₂H₆ (g) +7 O₂ (g) → 4CO₂(g) + 6H₂O (g)The mole ratio is 2 mol C₂H₆ : 7 mol O₂
whats the name of S4O6
Answer:
Sulfonic acid
Explanation:
I think this is correct
The name of the chemical formula [tex]S_4O_6[/tex] is tetrathionate.
What is [tex]S_4O_6[/tex]?The tetrathionate anion is sulfur that is produced by tetrathionic acid.
The ion has two sulfur atoms in oxidation state 0 and two sulfur atoms in oxidation state +5.
The structure of tetrathionate can be seen by following three corners of a cube.
Thus, Tetrathionate is the name of [tex]S_4O_6[/tex].
Learn more about anions, here:
https://brainly.com/question/1659592
HELP NOW!!Why is it important to classify living organisms?
Answer:
C. Scientists may study and discuss organisms easily
Why does warm soda go flat faster than chilled soda?
Hello There!
The moloques are moving faster in warm soda, so the carbonation leaves the soda faster.
Answer:
Same as what BlueFox stated above EXCEPT it is gas molecules move faster in warm soda
Explanation:
making fun of his typo,,,
On the periodic table, elements are arranged according to their mass numbers. TrueFalse
Explanation:
FALSE
ITS NOT ALWAYS NECESSARY TO BE IN AN ORDER
ii. Use the solubility table to label the state symbols of each compound in the reaction. (1 point) AgNO3 + KCL = AgCl + KNO3
Answer:
AgNO₃ (aq) + KCl (aq) → AgCl (s) + KNO₃ (aq)Explanation:
In a solubility table you find:
AgNO₃ (silver nitrate) is highly solubleKCl (potassium chloride) is solubleAgCl (silver chloride) is insolubleKNO₃ (potassium nitrate) is solubleIn a chemical equation the states of soluble compounds is identified as aqeous, using the letter "aq" in parenthesis, and the state of insoluble compounds is identified as solid, using "s" in parenthesis.
Then, the reaction showing the states of the reactants and products is:
AgNO₃ (aq) + KCl (aq) → AgCl (s) + KNO₃ (aq)In the chemical reaction AgNO3 + KCl = AgCl + KNO3, the state symbols for each compound are provided - AgNO3 (aq), KCl (aq), AgCl (s), and KNO3 (aq).
The state symbols for each compound in the reaction AgNO3 + KCl = AgCl + KNO3 are:
AgNO3 (aq) - Silver nitrate is soluble in water.KCl (aq) - Potassium chloride is soluble in water.AgCl (s) - Silver chloride is insoluble and will precipitate out of the solution.KNO3 (aq) - Potassium nitrate is soluble in water.What do all ions have in common in terms of their electrical structure?????
Answer:
The ratio between protons to electrons is not 1:1
Explanation:
A normal atom will be neutral in charge having 1 electron for each atom. An Atom that gains or looses an electron loses that perfect ratio. It is positive is electrons are loss and negative if electrons are gained.
Convert 6.33×10−6 cg to nanograms.
What are Isotopes ?....
Atoms that have different numbers of neutrons than protons and electrons are called isotopes.
Isotopes are atoms of the same element so they have the same number of protons. But, they have different mass numbers which means they have a different number of neutrons.
How much force is required to lift a rock a vertical distance of 8 m if 80 j of work were done
Answer:-
Try this formula:
W= Fd
F = W by d
Explanation:-
(Note: A newton-meter is the same thing as a joule, so the units for work are the same as those for energy – joules).
The force required to lift a rock at a vertical distance of 8 m if 80 j of work were done is 10 N.
What is force?A force is an effect that can alter an object's motion. Due to force, an object with mass can change its velocity, or accelerate.
Given,
Distance is 8 m
work done is 80 j
Now by the formula of work
[tex]\bold{Work = force \times distance}[/tex]
[tex]80= F\times 8\\\\F= \dfrac{80}{8} = 10 N[/tex]
Thus, the force required is 10 N.
Learn more about force, here:
https://brainly.com/question/26115859
which element was first discovered on the sun?
the element first discovered in the sun is the element Helium. This noble gas is the second most abundant element in the universe and was discovered on the sun before it was discovered on the earth.
hope this helps :)
HELP ASAP! GIVING BRAINLIEST!!
How could you give a pendulum more energy?
Answer: By pushing it.
Explanation: If you push the pendulum, the energy from your hand to the pendulum will be transferred thus giving the pendulum more energy.
Explain the difference between ecosystem, community, and population.
Out of the three you gave ecosystem is what I would call the most broad. An ecosystem includes living AND non-living things in an area
Community is all the LIVING things in an area (plants are included and I think bacteria is too, but I'm not sure)
Population is pretty narrow it just looks at specific species in one area. Population of mosquitoes doesn't include butterflies, if only looks at mosquitoes
Hope this helped!
what is enthalpy? ?????????????????????????
A thermodynamic quantity equivalent to the total heat content of a system
Answer:
a thermodynamic quantity to the total heat content of a system. it is equal to the internal energy of the system plus the product of pressure and volume. it is associated with a particular chemical process
Explanation:
i just looked up the definition.
How many grams of AL are needed to completely react with 135g FE2O3
About 45.6 gAL are need to completely react with 135g FE2O3
To determine the mass of Al needed to react with 135 grams of Fe₂O₃, convert the mass of Fe₂O₃ to moles, use the stoichiometric ratio to find moles of Al needed, and then convert those moles to grams of Al to three significant figures.
The question is asking how many grams of aluminum (Al) are needed to completely react with 135 grams of iron(III) oxide (Fe2O3). This is a stoichiometry problem that requires using the balanced chemical equation:
Fe₂O₃(s) + 2Al(s) →2Fe(s) + Al₂O₃(s)
We start by converting the mass of Fe₂O₃ to moles using its molar mass:
1.0g Fe₂O₃ / 159.7 g/mol = moles of Fe₂O₃
Then we use the mole ratio from the balanced equation to convert from moles of Fe₂O₃ to moles of Al. The molar mass of Al is 27.0 g/mol. Finally, we convert moles of Al to grams using its molar mass to find the mass of Al needed for the reaction.
With the provided mass of 135g of Fe₂O₃, and the reaction stoichiometry, we can determine the mass of Al required which will be expressed to three significant figures.
a shampoo bottle contains 553mL of air at 65C what is its volume when it cools to 22C
Answer:
V₂ = 0.483L = 483mL
Explanation:
Given parameters:
Inital volume of air in shampoo bottle V₁ = 553mL
Original temperature of the bottle T₁ = 65°C
Final temperature T₂= 22°C
Final volume of the gas in the bottle V₂=?
We first take the given units into standard units:
K = T°C + 273
For T₁ we have the temperature to be = 65 + 273 = 338K
T₂ = 22 + 273 = 295K
For the volume we convert to Litres or dm³
1000mL = 1L
V₁ = 553 x 10⁻³L = 0.553L
Now apply one of the gas laws to solve this problem.
From Charles law, we know that the volume of fixed mass of gas is directly proportional to its absolute temperature if the pressure is constant.
Charles's law is expressed as:
[tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex]
The unkown in the equation is V₂ we the express it as the subject of the formula :
V₂ = [tex]\frac{V_{1} T_{2} }{T_{1} }[/tex]
Putting the parameters in the equation gives:
V₂ = [tex]\frac{0.553 x 295}{338}[/tex]
V₂ = 0.483L = 483mL
A person who has a mass of 60kg run up a flight of stairs 12m high in 20 seconds What is the weight of the person
132 pounds. As you stated, their weight is 60 kg and 60 kg = 132.77 pounds
How many grams of phosphorus are in 500.0 grams of calcium phosphide? (i need the work also)
Final answer:
To find the grams of phosphorus in 500.0 grams of calcium phosphide, the molar mass of calcium phosphide is calculated, followed by the number of moles in the sample. The mole ratio then gives the moles of phosphorus, which is finally converted to grams, resulting in approximately 169.35 grams of phosphorus.
Explanation:
To determine the number of grams of phosphorus in 500.0 grams of calcium phosphide, we need to follow these steps:
Find the molecular formula of calcium phosphide which is Ca₃P₂.Calculate the molar mass of Ca₃P₂ by adding the molar masses of all the atoms present in the formula. The molar mass of calcium (Ca) is 40.08 g/mol and the molar mass of phosphorus (P) is 30.97 g/mol, therefore:Therefore, there are approximately 169.35 grams of phosphorus in 500.0 grams of calcium phosphide.
___solutions are good conductors of electricity.
lonic
Covalent
Heterogeneous
Gaseous
The answer is ionic
Answer: Option (a) is the correct answer.
Explanation:
A bond where transfer of electrons take place from one atom to another is known as an ionic bond.
An ionic solution is defined as a solution in which an ionic compound is dissociated into ions.
For example, NaCl is an ionic compound and when it is dissolved in water it dissociates as [tex]Na^{+}[/tex] and [tex]Cl^{-}[/tex] ions.
As it is known that electric current is the flow of charges. Hence, a solution that contains ions will be a good conductor of electricity.
Whereas in general, a covalent solution does not contain any ions.
Thus, we can conclude that ionic solutions are good conductors of electricity.
The brightness of a star is determined by _____.
distance from the Earth
temperature
color
season
size
The actual answer is size and temperature
All stars are very hot. They resemble a gigantic furnace of atomic energy. Some stars are much hotter than others and appear to be brighter. The brightness of a star also depends upon its size and its distance from the Earth. Larger stars tend to be brighter, but a star closer to the Earth will appear brighter than one the same size that is farther away.
PLEASE GIVE ME BRAINLIEST
Answer:
the correct answer is Size, Temperature, distance from the earth
hope this helps!! <33
An aerosol is a colloidal suspended in a .
An aerosol is a colloidal suspension in a gas, consisting of small particles or droplets that do not settle due to their small size. Examples include fog and smoke, where the dispersing medium is air. Understanding aerosols is important for their role in atmospheric processes and distinguishing them from other mixtures like solutions and suspensions.
Explanation:
An aerosol is a colloidal suspension in a gas. This means that an aerosol comprises tiny particles or droplets that are suspended within a gas. Unlike a suspension, where the particles can separate out over time due to their size (generally larger than 1 µm), the particles in a colloidal system, like an aerosol, do not settle because they are much smaller and range in size from about 2 to 500 nm. Aerosols can be composed of both solid and liquid particles dispersed in a gas, and these particles are stable enough not to settle quickly under the influence of gravity.
Examples of aerosols include fog, which consists of liquid water droplets dispersed in air, and smoke, which contains solid carbon particles also suspended in air. In both cases, the medium dispersing these particles is a gas (air), highlighting the defining characteristic of aerosols as a type of colloid. The significance of aerosols extends beyond simple examples, as they play integral roles in atmospheric processes, affecting weather, climate, and air quality, by influencing the scattering and absorption of radiation and serving as nuclei for cloud formation.
The ability of colloids, including aerosols, to scatter light, known as the Tyndall effect, further distinguishes them from solutions which are homogeneous mixtures and therefore do not exhibit this phenomenon. It's important to understand the distinction between aerosols and other types of mixtures, such as solutions and suspensions, to appreciate the unique physical and chemical behaviors of colloidal systems.
A chemical property is a change in
Density
Physical state
Composition of matter
Hardness
I believe it would be either the Density or the composition of its matter
It is the composition of matter
blank may be rinsed over materials to wash off explosive residue
Acetone may be rinsed over materials to wash off explosive residue.
How rinsed over materials to wash off explosive residue?The real solution to the residue issue is to use methods that actually rinse away cleaner.
Some solvents and steam vapor systems are examples of residue-free chemistry. Completely water soluble and rinseable, soap-free products for carpet and hard floor care are a valuable part of the professional cleaner’s arsenal of residue-free cleaners.
In clean areas, all exposed surfaces should be smooth, impervious and unbroken in order to minimize the shedding or accumulation of particles or microorganisms and to permit the repeated application of cleaning agents, and disinfectants where used.
Acetone may be rinsed over materials to wash off the explosive residue. This can then be analyzed by x-ray techniques. Advance in explosives that has been proposed. Use of small color chips. These chips would be added to explosive materials available to the public.
Learn more about acetone, refer:
https://brainly.com/question/10865432
#SPJ2